On 10/06/16 16:17, Roger Quadros wrote: > Hi, > > This series adds dual role support to dwc3 controller driver. > Series depends on the OTG/dual-role framework [1]. > > [1] - http://thread.gmane.org/gmane.linux.usb.general/143568 > > Patches are based on Felipe's balbi/usb.git testing/next This patch is also a pre-requisite for this series. http://article.gmane.org/gmane.linux.kernel/2240761 > > Changelog: > > v7: > - rebased to v4.7-rc1 + balbi/usb.git testing/next > - cleaned up otg irq resource code > > v6: > - use just otg irq to get otg events and don't depend on extcon at all. > - follow OTG flow in TRM strictly. > - use tracepoints instead of dev_dbg(). > - match IRQ flags in dwc3_omap and core.c for shared otg interrupt. > > v5: Internal revision. Not sent to mailing list. > > v4: first version that was reviewed. > > cheers, > -roger > > > Roger Quadros (4): > usb: dwc3: core.h: add some register definitions > usb: dwc3: add dual-role support > ARM: dts: dra7*-evm: Enable dual-role for usb1 > ARM: dts: am43xx: Enable dual-role on USB1 > > arch/arm/boot/dts/am437x-gp-evm.dts | 5 +- > arch/arm/boot/dts/am437x-sk-evm.dts | 5 +- > arch/arm/boot/dts/am43x-epos-evm.dts | 5 +- > arch/arm/boot/dts/dra7-evm.dts | 5 +- > arch/arm/boot/dts/dra72-evm-common.dtsi | 5 +- > drivers/usb/dwc3/core.c | 546 +++++++++++++++++++++++++++++++- > drivers/usb/dwc3/core.h | 114 ++++++- > drivers/usb/dwc3/gadget.c | 6 +- > drivers/usb/dwc3/host.c | 2 + > 9 files changed, 677 insertions(+), 16 deletions(-) > -- cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
