On 6/10/2016 1:19 PM, Roger Quadros wrote:
It provides APIs for the following tasks
- Registering an OTG/dual-role capable controller
- Registering Host and Gadget controllers to OTG core
- Providing inputs to and kicking the OTG state machine
Provide a dual-role device (DRD) state machine.
DRD mode is a reduced functionality OTG mode. In this mode
we don't support SRP, HNP and dynamic role-swap.
In DRD operation, the controller mode (Host or Peripheral)
is decided based on the ID pin status. Once a cable plug (Type-A
or Type-B) is attached the controller selects the state
and doesn't change till the cable in unplugged and a different
cable type is inserted.
As we don't need most of the complex OTG states and OTG timers
we implement a lean DRD state machine in usb-otg.c.
The DRD state machine is only interested in 2 hardware inputs
'id' and 'b_sess_vld'.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
<snip>
[...]
+/**
+ * usb_otg_register_gadget - Register the gadget controller to OTG core
+ * @gadget: gadget controller
We call that USB device controller (UDC). I'm not sure what you meant here...
And what about the 2nd arg, 'ops'?
There are 2 data structures representing the Device controller.
struct usb_gadget - represents a usb slave device
struct usb_udc -struct usb_udc - describes one usb device controller
usb_udc is for private use only. usb_otg_register_gadget() takes struct usb_gadget
as argument.
Do you want me to refer to struct usb_gadget as UDC?
No.
What is wrong with calling it gadget controller?
It's not a controller, it's a piece of software AFAIU. Or is my English
just too weak? :-)
--
cheers,
-roger
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
