Re: [PATCH 1/2] Documentation: bindings: add DT documentation for Rockchip USB2PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Heiko,

On 05/31/2016 05:02 PM, Heiko Stübner wrote:
Hi Frank,

Am Dienstag, 31. Mai 2016, 14:40:10 schrieb Frank Wang:
Signed-off-by: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
---
  .../bindings/phy/phy-rockchip-inno-usb2.txt        |   48
++++++++++++++++++++ 1 file changed, 48 insertions(+)
  create mode 100644
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt

diff --git
a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt new file
mode 100644
index 0000000..4e537b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -0,0 +1,48 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible: should contain:
+	* "rockchip,rk3366-usb2phy"
+ - #clock-cells: should be 0.
+ - clock-names: specify the 480m output clk name.
+
+Optional properties:
+ - vbus_host-gpio: pull gpio high/low to control the host vbus power.

sorry for not catching that in our earlier talks, but I believe this should be
a regulator instead. See for example vcc5_host1, vcc5v_otg in rk3288-veyron-
chromebook.dtsi .


That is OK, I will correct it in the next version.


+Required nodes: a sub-node is required for each port the phy provides.
+		The sub-node name is used to identify host or otg port.
+
+Required properties (port (child) node):
+ - #phy-cells: must be 0. See ./phy-bindings.txt for details.
+ - interrupts: irq number for host/otg port.

make that something like:
Specify an interrupt for each entry in interrupt-names.

+ - interrupt-names: interrupt name, in line with irq number.

make that something like:
Shall be "linestate" for the linestate interrupt.

Yeah, Got it.

---

You might want to add the bvalid and id interrupts for the otg phys as well
already - would make handling legacy devicetree files easier. [= if they get
specified later, the driver would always need to also handle devicetrees where
they aren't specified].


Hmmm! you mean that I can specify these properties into documentation, even if the driver have not handled (implemented) them in current?

BR.
Frank


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux