Subsequent suspends seem fine. I suspect it is related to USB controller; but because I see ACPI related message this is sent to linux-acpi as well. Specifically, I am suspicious of this: [ 132.763954] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI The controller immediately resumes after any attempt to suspend it, so any autosuspend functionality is currently disabled. But it /looks/ like ACPI somehow tries to do it anyway. I can also reproduce it by unloading and reloading USB drivers which supports USB guess. dmesg follows. [ 0.000000] Linux version 2.6.29-rc2-1avb (bor@cooker) (gcc version 4.3.2 (GCC) ) #10 Mon Jan 19 21:04:50 MSK 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] PAT WC disabled due to known CPU erratum. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) [ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ef60000 (usable) [ 0.000000] BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1ef60 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 1ef60000 @ 7000-d000 [ 0.000000] RAMDISK: 1ebcf000 - 1ef4f86c [ 0.000000] ACPI: RSDP 000F0090, 0014 (r0 TOSHIB) [ 0.000000] ACPI: RSDT 1EF60000, 0028 (r1 TOSHIB 750 970814 TASM 4010000) [ 0.000000] ACPI: FACP 1EF60054, 0084 (r2 TOSHIB 750 970814 TASM 4010000) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 1EF600D8, 68DA (r1 TOSHIB 4000 20020417 MSFT 100000A) [ 0.000000] ACPI: FACS 000EEE00, 0040 [ 0.000000] 495MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ef60000 [ 0.000000] low ram: 00000000 - 1ef60000 [ 0.000000] bootmap 00001000 - 00004dec [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001ef60000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 0000973dd8] TEXT DATA BSS ==> [0000100000 - 0000973dd8] [ 0.000000] #2 [001ebcf000 - 001ef4f86c] RAMDISK ==> [001ebcf000 - 001ef4f86c] [ 0.000000] #3 [0000974000 - 0000978000] INIT_PG_TABLE ==> [0000974000 - 0000978000] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ef60 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ef60 [ 0.000000] On node 0 totalpages: 126719 [ 0.000000] free_area_init_node: node 0, pgdat c03caa00, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 959 pages used for memmap [ 0.000000] Normal zone: 121761 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xee08 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000 [ 0.000000] PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000 [ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125728 [ 0.000000] Kernel command line: BOOT_IMAGE=2.6.29-rc2-1avb root=LABEL=/ resume=LABEL=swap acpi_backlight=vendor netconsole=@xxxxxxxx/eth0,@10.0.0.2/00:17:42:21:27:e4 vga=791 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] CPU 0 irqstacks, hard=c0414000 soft=c0413000 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 747.745 MHz processor. [ 0.003333] Console: colour dummy device 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003333] ... MAX_LOCK_DEPTH: 48 [ 0.003333] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003333] ... CLASSHASH_SIZE: 4096 [ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.003333] ... CHAINHASH_SIZE: 8192 [ 0.003333] memory used by lock dependency info: 2591 kB [ 0.003333] per task-struct memory footprint: 1920 bytes [ 0.003333] ------------------------ [ 0.003333] | Locking API testsuite: [ 0.003333] ---------------------------------------------------------------------------- [ 0.003333] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.003333] double unlock: ok | ok | ok | ok | ok | ok | [ 0.003333] initialize held: ok | ok | ok | ok | ok | ok | [ 0.003333] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] recursive read-lock: | ok | | ok | [ 0.003333] recursive read-lock #2: | ok | | ok | [ 0.003333] mixed read-write-lock: | ok | | ok | [ 0.003333] mixed write-read-lock: | ok | | ok | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.003333] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.003333] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.003333] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.003333] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.003333] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.003333] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.003333] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.003333] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.003333] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/123: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/123: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/132: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/132: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/213: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/213: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/231: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/231: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/312: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/312: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/321: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/321: ok | ok | ok | [ 0.003333] hard-irq read-recursion/123: ok | [ 0.003333] soft-irq read-recursion/123: ok | [ 0.003333] hard-irq read-recursion/132: ok | [ 0.003333] soft-irq read-recursion/132: ok | [ 0.003333] hard-irq read-recursion/213: ok | [ 0.003333] soft-irq read-recursion/213: ok | [ 0.003333] hard-irq read-recursion/231: ok | [ 0.003333] soft-irq read-recursion/231: ok | [ 0.003333] hard-irq read-recursion/312: ok | [ 0.003333] soft-irq read-recursion/312: ok | [ 0.003333] hard-irq read-recursion/321: ok | [ 0.003333] soft-irq read-recursion/321: ok | [ 0.003333] ------------------------------------------------------- [ 0.003333] Good, all 218 testcases passed! | [ 0.003333] --------------------------------- [ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.003333] Memory: 489984k/507264k available (2104k kernel code, 16676k reserved, 794k data, 232k init, 0k highmem) [ 0.003333] virtual kernel memory layout: [ 0.003333] fixmap : 0xfffed000 - 0xfffff000 ( 72 kB) [ 0.003333] vmalloc : 0xdf760000 - 0xfffeb000 ( 520 MB) [ 0.003333] lowmem : 0xc0000000 - 0xdef60000 ( 495 MB) [ 0.003333] .init : 0xc03d6000 - 0xc0410000 ( 232 kB) [ 0.003333] .data : 0xc030e245 - 0xc03d4e00 ( 794 kB) [ 0.003333] .text : 0xc0100000 - 0xc030e245 (2104 kB) [ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.003333] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.003398] Calibrating delay loop (skipped), value calculated using timer frequency.. 1496.80 BogoMIPS (lpj=2492483) [ 0.003584] Mount-cache hash table entries: 512 [ 0.006247] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.006312] CPU: L2 cache: 256K [ 0.006330] CPU serial number disabled. [ 0.006399] CPU: Intel Pentium III (Coppermine) stepping 0a [ 0.006452] Checking 'hlt' instruction... OK. [ 0.017719] Freeing SMP alternatives: 0k freed [ 0.017742] ACPI: Core revision 20081204 [ 0.048821] ACPI: setting ELCR to 0200 (from 0a00) [ 0.052315] Testing tracer nop: PASSED [ 0.056794] net_namespace: 732 bytes [ 0.058508] NET: Registered protocol family 16 [ 0.061942] ACPI: bus type pci registered [ 0.063976] PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5 [ 0.064028] PCI: Using configuration type 1 for base access [ 0.075451] bio: create slab <bio-0> at 0 [ 0.086397] ACPI: EC: Look up EC in DSDT [ 0.115449] ACPI: Interpreter enabled [ 0.115514] ACPI: (supports S0 S3 S4 S5) [ 0.115939] ACPI: Using PIC for interrupt routing [ 0.176069] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.176236] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.177546] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.177947] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7eff000-0xf7efffff] [ 0.178091] pci 0000:00:02.0: PME# supported from D3hot D3cold [ 0.178135] pci 0000:00:02.0: PME# disabled [ 0.178303] pci 0000:00:04.0: reg 20 io port: [0xeff0-0xefff] [ 0.178489] pci 0000:00:06.0: reg 10 io port: [0xed00-0xedff] [ 0.178513] pci 0000:00:06.0: reg 14 32bit mmio: [0xf7efe000-0xf7efefff] [ 0.178641] pci 0000:00:06.0: supports D1 D2 [ 0.178649] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold [ 0.178676] pci 0000:00:06.0: PME# disabled [ 0.179089] pci 0000:00:08.0: quirk: region ee00-ee3f claimed by ali7101 ACPI [ 0.179120] pci 0000:00:08.0: quirk: region ef00-ef1f claimed by ali7101 SMB [ 0.179241] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7efd000-0xf7efdfff] [ 0.179265] pci 0000:00:0a.0: reg 14 io port: [0xeb40-0xeb7f] [ 0.179289] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7d00000-0xf7dfffff] [ 0.179403] pci 0000:00:0a.0: supports D1 D2 [ 0.179410] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.179439] pci 0000:00:0a.0: PME# disabled [ 0.179568] pci 0000:00:10.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.179628] pci 0000:00:10.0: supports D1 D2 [ 0.179636] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.179665] pci 0000:00:10.0: PME# disabled [ 0.179779] pci 0000:00:11.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.179944] pci 0000:00:11.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.180169] pci 0000:00:12.0: reg 10 32bit mmio: [0xf7cffe00-0xf7cfffff] [ 0.180316] pci 0000:00:12.0: supports D1 D2 [ 0.180324] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180354] pci 0000:00:12.0: PME# disabled [ 0.180546] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff] [ 0.180570] pci 0000:01:00.0: reg 14 32bit mmio: [0xfbc00000-0xfbffffff] [ 0.180593] pci 0000:01:00.0: reg 18 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.180615] pci 0000:01:00.0: reg 1c 32bit mmio: [0xf7ff8000-0xf7ffffff] [ 0.180661] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.180732] pci 0000:01:00.0: supports D1 D2 [ 0.180869] pci 0000:00:01.0: bridge 32bit mmio: [0xf7f00000-0xfdffffff] [ 0.181073] pci_bus 0000:00: on NUMA node 0 [ 0.181124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.181745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.220197] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) [ 0.221156] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) [ 0.222058] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11) [ 0.222961] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) [ 0.224024] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11) [ 0.224938] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) [ 0.226456] ACPI: Power Resource [PFAN] (off) [ 0.229542] PCI: Using ACPI for IRQ routing [ 0.233783] pnp: PnP ACPI init [ 0.233980] ACPI: bus type pnp registered [ 0.260086] pnp: PnP ACPI: found 12 devices [ 0.260145] ACPI: ACPI bus type pnp unregistered [ 0.260260] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.260290] system 00:00: iomem range 0xe0000-0xeffff could not be reserved [ 0.260318] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.260346] system 00:00: iomem range 0x100000-0x1ef5ffff could not be reserved [ 0.260376] system 00:00: iomem range 0x1ef60000-0x1ef6ffff could not be reserved [ 0.260405] system 00:00: iomem range 0x1f000000-0x1fffffff has been reserved [ 0.260432] system 00:00: iomem range 0x1ef70000-0x1effffff has been reserved [ 0.260462] system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved [ 0.260555] system 00:08: ioport range 0x370-0x371 has been reserved [ 0.260583] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.260609] system 00:08: ioport range 0x480-0x48f has been reserved [ 0.260634] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.260661] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.260686] system 00:08: ioport range 0x6c0-0x6ff has been reserved [ 0.260713] system 00:08: ioport range 0xe000-0xe07f has been reserved [ 0.260740] system 00:08: ioport range 0xe080-0xe0ff has been reserved [ 0.260767] system 00:08: ioport range 0xe400-0xe47f has been reserved [ 0.260794] system 00:08: ioport range 0xe480-0xe4ff has been reserved [ 0.260821] system 00:08: ioport range 0xe800-0xe87f has been reserved [ 0.260847] system 00:08: ioport range 0xe880-0xe8ff has been reserved [ 0.260875] system 00:08: ioport range 0xec00-0xec7f has been reserved [ 0.260902] system 00:08: ioport range 0xec80-0xecff has been reserved [ 0.260931] system 00:08: ioport range 0xee00-0xee41 could not be reserved [ 0.260959] system 00:08: ioport range 0xee90-0xee9f has been reserved [ 0.260987] system 00:08: ioport range 0xeeac-0xeeac has been reserved [ 0.261015] system 00:08: ioport range 0xef00-0xef3f could not be reserved [ 0.261044] system 00:08: ioport range 0xef40-0xef5f has been reserved [ 0.300287] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.300342] pci 0000:00:01.0: IO window: disabled [ 0.300375] pci 0000:00:01.0: MEM window: 0xf7f00000-0xfdffffff [ 0.300405] pci 0000:00:01.0: PREFETCH window: 0x00000048000000-0x000000480fffff [ 0.300451] pci 0000:00:10.0: CardBus bridge, secondary bus 0000:02 [ 0.300472] pci 0000:00:10.0: IO window: 0x001000-0x0010ff [ 0.300499] pci 0000:00:10.0: IO window: 0x001400-0x0014ff [ 0.300528] pci 0000:00:10.0: PREFETCH window: 0x30000000-0x33ffffff [ 0.300557] pci 0000:00:10.0: MEM window: 0x34000000-0x37ffffff [ 0.300586] pci 0000:00:11.0: CardBus bridge, secondary bus 0000:06 [ 0.300607] pci 0000:00:11.0: IO window: 0x001800-0x0018ff [ 0.300634] pci 0000:00:11.0: IO window: 0x001c00-0x001cff [ 0.300662] pci 0000:00:11.0: PREFETCH window: 0x38000000-0x3bffffff [ 0.300691] pci 0000:00:11.0: MEM window: 0x3c000000-0x3fffffff [ 0.300721] pci 0000:00:11.1: CardBus bridge, secondary bus 0000:0a [ 0.300741] pci 0000:00:11.1: IO window: 0x002000-0x0020ff [ 0.300768] pci 0000:00:11.1: IO window: 0x002400-0x0024ff [ 0.300796] pci 0000:00:11.1: PREFETCH window: 0x40000000-0x43ffffff [ 0.300825] pci 0000:00:11.1: MEM window: 0x44000000-0x47ffffff [ 0.300892] pci 0000:00:01.0: setting latency timer to 64 [ 0.300925] pci 0000:00:10.0: enabling device (0000 -> 0003) [ 0.302764] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.302793] PCI: setting IRQ 11 as level-triggered [ 0.302807] pci 0000:00:10.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.302865] pci 0000:00:11.0: enabling device (0000 -> 0003) [ 0.304375] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.304403] pci 0000:00:11.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.304461] pci 0000:00:11.1: enabling device (0000 -> 0003) [ 0.305920] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.305946] pci 0000:00:11.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.305994] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.306003] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.306012] pci_bus 0000:01: resource 0 mem: [0x0-0x0] [ 0.306021] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xfdffffff] [ 0.306030] pci_bus 0000:01: resource 2 mem: [0x48000000-0x480fffff] [ 0.306039] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.306049] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff] [ 0.306057] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff] [ 0.306066] pci_bus 0000:02: resource 2 mem: [0x30000000-0x33ffffff] [ 0.306075] pci_bus 0000:02: resource 3 mem: [0x34000000-0x37ffffff] [ 0.306085] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff] [ 0.306094] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff] [ 0.306103] pci_bus 0000:06: resource 2 mem: [0x38000000-0x3bffffff] [ 0.306112] pci_bus 0000:06: resource 3 mem: [0x3c000000-0x3fffffff] [ 0.306122] pci_bus 0000:0a: resource 0 io: [0x2000-0x20ff] [ 0.306130] pci_bus 0000:0a: resource 1 io: [0x2400-0x24ff] [ 0.306139] pci_bus 0000:0a: resource 2 mem: [0x40000000-0x43ffffff] [ 0.306148] pci_bus 0000:0a: resource 3 mem: [0x44000000-0x47ffffff] [ 0.306301] NET: Registered protocol family 2 [ 0.307574] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.308643] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.309380] TCP bind hash table entries: 16384 (order: 7, 655360 bytes) [ 0.315949] TCP: Hash tables configured (established 16384 bind 16384) [ 0.316246] TCP reno registered [ 0.317112] NET: Registered protocol family 1 [ 0.318626] checking if image is initramfs... it is [ 0.800127] Switched to high resolution mode on CPU 0 [ 1.231151] Freeing initrd memory: 3586k freed [ 1.239869] Initializing RT-Tester: OK [ 1.241388] audit: initializing netlink socket (disabled) [ 1.241644] type=2000 audit(1232396742.240:1): initialized [ 1.250467] Kprobe smoke test started [ 1.262102] Kprobe smoke test passed successfully [ 1.262221] Testing tracer sched_switch: PASSED [ 1.400842] msgmni has been set to 964 [ 1.402425] io scheduler noop registered [ 1.402460] io scheduler anticipatory registered [ 1.402480] io scheduler deadline registered [ 1.402611] io scheduler cfq registered (default) [ 1.402900] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 1.402980] pci 0000:00:0a.0: Firmware left e100 interrupts enabled; disabling [ 1.403082] pci 0000:01:00.0: Boot video device [ 1.406178] vesafb: framebuffer at 0xfc000000, mapped to 0xdf780000, using 3072k, total 16384k [ 1.406232] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 1.406253] vesafb: protected mode interface info at c000:775e [ 1.406274] vesafb: pmi: set display start = c00c777f, set palette = c00c77e2 [ 1.406296] vesafb: scrolling: redraw [ 1.406317] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.473929] Console: switching to colour frame buffer device 128x48 [ 1.539446] fb0: VESA VGA frame buffer device [ 1.984738] brd: module loaded [ 1.985188] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI [ 1.985945] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.989208] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.989956] e100 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 2.018108] e100 0000:00:0a.0: PME# disabled [ 2.019933] e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr 00:00:39:d7:14:a1 [ 2.021455] netconsole: local port 6665 [ 2.021945] netconsole: local IP 10.0.0.1 [ 2.022442] netconsole: interface eth0 [ 2.022907] netconsole: remote port 6666 [ 2.023688] netconsole: remote IP 10.0.0.2 [ 2.024200] netconsole: remote ethernet address 00:17:42:21:27:e4 [ 2.024994] netconsole: device eth0 not up yet, forcing it [ 2.041876] e100: eth0: e100_request_firmware: Failed to load firmware "e100/d101m_ucode.bin": -22 [ 2.043848] netconsole: failed to open eth0 [ 2.044380] netconsole: cleaning up [ 2.046108] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.052660] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.053449] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.057241] mice: PS/2 mouse device common for all mice [ 2.058698] cpuidle: using governor ladder [ 2.083433] cpuidle: using governor menu [ 2.107883] TCP cubic registered [ 2.131937] Using IPI Shortcut mode [ 2.159264] registered taskstats version 1 [ 2.184377] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 2.210742] Freeing unused kernel memory: 232k freed [ 2.235995] Write protecting the kernel text: 2108k [ 2.260576] Write protecting the kernel read-only data: 620k [ 2.317122] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.944824] SCSI subsystem initialized [ 3.016067] Driver 'sd' needs updating - please use bus_type methods [ 3.148439] libata version 3.00 loaded. [ 3.191171] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 3.215842] scsi0 : pata_ali [ 3.240392] scsi1 : pata_ali [ 3.267837] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq 14 [ 3.290960] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq 15 [ 3.474168] ata1.00: ATA-5: IC25N020ATDA04-0, DA3OA70A, max UDMA/100 [ 3.496878] ata1.00: 39070080 sectors, multi 0: LBA [ 3.519208] ata1.00: limited to UDMA/33 due to 40-wire cable [ 3.554005] ata1.00: configured for UDMA/33 [ 3.577983] scsi 0:0:0:0: Direct-Access ATA IC25N020ATDA04-0 DA3O PQ: 0 ANSI: 5 [ 3.602313] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [ 3.625303] sd 0:0:0:0: [sda] Write Protect is off [ 3.648022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.648205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.673804] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [ 3.697993] sd 0:0:0:0: [sda] Write Protect is off [ 3.721864] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.722047] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.746725] sda: sda1 sda2 [ 3.800099] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.023930] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2502, 1313, max UDMA/33 [ 4.048353] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled [ 4.072801] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 4.110470] ata2.00: configured for UDMA/33 [ 4.137806] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2502 1313 PQ: 0 ANSI: 5 [ 4.429121] ReiserFS: sda2: found reiserfs format "3.6" with standard journal [ 4.455829] ReiserFS: sda2: using ordered data mode [ 4.496181] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 4.559357] ReiserFS: sda2: checking transaction log (sda2) [ 4.637914] ReiserFS: sda2: Using r5 hash to sort names [ 7.413076] usbcore: registered new interface driver usbfs [ 7.440426] usbcore: registered new interface driver hub [ 7.467200] usbcore: registered new device driver usb [ 14.521396] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 14.523608] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 [ 14.523628] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [ 14.523810] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 14.526264] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 14.526396] ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000 [ 14.526472] Linux agpgart interface v0.103 [ 14.567350] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 14.578051] ACPI: Power Button (FF) [PWRF] [ 14.578847] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 14.594398] ACPI: Lid Switch [LID] [ 14.609290] usb usb1: configuration #1 chosen from 1 choice [ 14.640544] hub 1-0:1.0: USB hub found [ 14.640845] hub 1-0:1.0: 3 ports detected [ 14.783190] ACPI: AC Adapter [ADP1] (on-line) [ 14.801030] ACPI Warning (nspredef-0940): \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer [20081204] [ 14.802548] ACPI: Battery Slot [BAT1] (battery present) [ 14.802770] ACPI: Battery Slot [BAT2] (battery absent) [ 14.819560] agpgart-ali 0000:00:00.0: ALi M1644 chipset [ 14.833061] agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xf0000000 [ 14.844907] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 14.845769] processor ACPI_CPU:00: registered as cooling_device0 [ 14.965927] thermal LNXTHERM:01: registered as thermal_zone0 [ 14.967981] ACPI: Thermal Zone [THRM] (58 C) [ 15.244811] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 [ 15.244828] toshiba_acpi: HCI method: \_SB_.VALD.GHCI [ 15.303315] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/device:15/input/input3 [ 15.316961] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) [ 15.416846] fan PNP0C0B:00: registered as cooling_device1 [ 15.416886] ACPI: Fan [FAN] (off) [ 15.507446] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.507825] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 15.559118] pci 0000:00:08.0: enabling device (0000 -> 0001) [ 15.560404] ALi_M1535: initialized. timeout=60 sec (nowayout=0) [ 15.846986] Driver 'sr' needs updating - please use bus_type methods [ 15.902466] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 15.902493] Uniform CD-ROM driver Revision: 3.20 [ 15.903945] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 16.099411] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 16.816515] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 16.983084] rtc_cmos 00:07: RTC can wake from S4 [ 16.984900] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 16.984998] rtc0: alarms up to one year, 114 bytes nvram [ 17.178421] yenta_cardbus 0000:00:10.0: CardBus bridge found [12a3:ab01] [ 17.304537] yenta_cardbus 0000:00:10.0: ISA IRQ mask 0x0000, PCI irq 11 [ 17.304556] yenta_cardbus 0000:00:10.0: Socket status: 30000059 [ 17.313791] yenta_cardbus 0000:00:11.0: CardBus bridge found [1179:0001] [ 17.441061] yenta_cardbus 0000:00:11.0: ISA IRQ mask 0x04b8, PCI irq 11 [ 17.441076] yenta_cardbus 0000:00:11.0: Socket status: 30000007 [ 17.444395] yenta_cardbus 0000:00:11.1: CardBus bridge found [1179:0001] [ 17.571331] yenta_cardbus 0000:00:11.1: ISA IRQ mask 0x04b8, PCI irq 11 [ 17.571349] yenta_cardbus 0000:00:11.1: Socket status: 30000007 [ 17.947089] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0 [ 18.681446] NET: Registered protocol family 23 [ 18.925773] Detected unconfigured Toshiba laptop with ALi ISA bridge SMSC IrDA chip, pre-configuring device. [ 18.925814] Activated ALi 1533 ISA bridge port 0x02e8. [ 18.925831] Activated ALi 1533 ISA bridge port 0x02f8. [ 18.926087] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227 [ 18.926103] smsc_superio_flat(): IrDA not enabled [ 18.926132] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x02 [ 18.926172] SMsC IrDA Controller found [ 18.926176] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7 [ 18.926395] No transceiver found. Defaulting to Fast pin select [ 18.926439] irda0 (): not using net_device_ops yet [ 18.927576] IrDA: Registered device irda0 [ 20.317350] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 20.319352] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 20.319373] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 24.530878] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 24.534346] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 24.535874] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 24.557357] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 24.560824] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: clean. [ 24.562351] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean. [ 24.563868] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean. [ 24.566429] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean. [ 24.571005] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 24.578360] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 24.737568] Marking TSC unstable due to TSC halts in idle [ 24.796747] Clocksource tsc unstable (delta = -84974128 ns) [ 25.303851] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 25.307301] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 25.308829] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 25.310398] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 25.312952] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 25.315702] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 25.330642] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 25.584442] orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al) [ 25.679610] orinoco_cs 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al) [ 25.722367] eth1 (orinoco_cs): not using net_device_ops yet [ 25.762124] eth1: Hardware identity 0005:0002:0001:0002 [ 25.762237] eth1: Station identity 001f:0001:0006:000e [ 25.762248] eth1: Firmware determined as Lucent/Agere 6.14 [ 25.762472] eth1: Attempting to download firmware agere_sta_fw.bin [ 25.762503] hermes_dld: AUX enable returned 0 [ 25.763559] hermes_dld: AUX disable returned 0 [ 25.763567] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 25.763575] eth1: Read PDA returned 0 [ 25.763588] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 25.886677] hermes_dld: AUX enable returned 0 [ 25.886742] hermes_dld: Enabling volatile, EP 0x000f8000 [ 25.887788] hermes_dld: PROGRAM_ENABLE returned 0 [ 25.887796] eth1: Program init returned 0 [ 25.887806] hermes_dld: Programming block of length 60416 to address 0x001f0000 [ 25.935898] hermes_dld: Programming block of length 4096 to address 0x001ef000 [ 25.939178] eth1: Program returned 0 [ 25.939187] hermes_dld: Found record 0x0003 at ddaddc1c [ 25.939209] hermes_dld: Found record 0x0005 at ddaddca8 [ 25.939228] hermes_dld: Found record 0x0008 at ddaddcd2 [ 25.939244] hermes_dld: Found record 0x0007 at ddaddcc4 [ 25.939262] hermes_dld: Found record 0x0006 at ddaddcb6 [ 25.939282] hermes_dld: Found record 0x0110 at ddaddd9a [ 25.939315] hermes_dld: Found record 0x0120 at ddadddba [ 25.939348] hermes_dld: Found record 0x0130 at ddadddda [ 25.939380] hermes_dld: Found record 0x0140 at ddadddfa [ 25.939393] hermes_dld: Found record 0x0150 at ddadde02 [ 25.939406] hermes_dld: Using default record 0x0160 at dfabfb60 [ 25.939438] hermes_dld: Found record 0x0101 at ddaddd46 [ 25.939453] hermes_dld: Found record 0x0103 at ddaddd5c [ 25.939473] hermes_dld: Found record 0x0104 at ddaddd6c [ 25.939485] hermes_dld: Found record 0x0105 at ddaddd72 [ 25.939497] hermes_dld: Found record 0x0105 at ddaddd72 [ 25.939508] hermes_dld: Found record 0x0105 at ddaddd72 [ 25.939520] hermes_dld: Found record 0x0107 at ddaddd7e [ 25.939532] hermes_dld: Found record 0x0109 at ddaddd8c [ 25.939550] hermes_dld: Using default record 0x0161 at dfabfb80 [ 25.939765] eth1: Apply PDA returned 0 [ 25.939829] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [ 25.939858] hermes_dld: AUX disable returned 0 [ 25.950498] eth1: Program end returned 0 [ 25.950507] eth1: hermes_present returned 1 [ 25.951323] eth1: Hardware identity 0005:0002:0001:0002 [ 25.951451] eth1: Station identity 001f:0002:0009:0030 [ 25.951461] eth1: Firmware determined as Lucent/Agere 9.48 [ 25.951469] eth1: Ad-hoc demo mode supported [ 25.951477] eth1: IEEE standard IBSS ad-hoc mode supported [ 25.951484] eth1: WEP supported, 104-bit key [ 25.951492] eth1: WPA-PSK supported [ 26.702954] eth1: MAC address 00:02:2d:26:95:6c [ 26.703070] eth1: Station name "HERMES I" [ 26.703921] eth1: ready [ 26.704770] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 27.032767] Toshiba System Management Mode driver v1.11 26/9/2001 [ 27.124714] Non-volatile memory driver v1.3 [ 27.889696] device-mapper: uevent: version 1.0.3 [ 27.891810] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx [ 29.699045] device-mapper: multipath: version 1.0.5 loaded [ 30.923734] device-mapper: multipath round-robin: version 1.0.0 loaded [ 30.924984] device-mapper: table: 254:0: multipath: error getting device [ 30.925003] device-mapper: ioctl: error adding target to table [ 39.237654] loop: module loaded [ 43.771506] Adding 500432k swap on /dev/sda1. Priority:-1 extents:1 across:500432k [ 47.789134] IrCOMM protocol (Dag Brattli) [ 50.716012] PPP generic driver version 2.4.2 [ 57.581564] NET: Registered protocol family 17 [ 57.970436] eth1: Lucent/Agere firmware doesn't support manual roaming [ 58.123407] eth1: New link status: Connected (0001) [ 130.624810] PM: Syncing filesystems ... done. [ 130.688894] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 130.731416] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 130.748981] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 130.749673] Suspending console(s) (use no_console_suspend to debug) [ 130.761183] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 131.218872] sd 0:0:0:0: [sda] Stopping disk [ 131.899832] pci 0000:01:00.0: power state changed by ACPI to D3 [ 131.914446] e100 0000:00:0a.0: PME# enabled [ 131.914687] e100 0000:00:0a.0: wake-up capability enabled by ACPI [ 131.914858] e100 0000:00:0a.0: PCI INT A disabled [ 131.984160] ALI 5451 0000:00:06.0: PCI INT A disabled [ 131.997154] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [ 132.750111] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 132.763635] ohci_hcd 0000:00:02.0: PCI INT A disabled [ 132.763740] ohci_hcd 0000:00:02.0: PME# enabled [ 132.763954] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI [ 132.793541] ACPI: Preparing to enter system sleep state S3 [ 132.793541] Back to C! [ 132.793541] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b) [ 132.793541] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 132.793541] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 132.807630] ACPI: Waking up from system sleep state S3 [ 132.827467] agpgart-ali 0000:00:00.0: PME# disabled [ 132.827519] pci 0000:00:01.0: setting latency timer to 64 [ 132.827550] ohci_hcd 0000:00:02.0: wake-up capability disabled by ACPI [ 132.827565] ohci_hcd 0000:00:02.0: PME# disabled [ 132.840174] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [ 132.840202] ohci_hcd 0000:00:02.0: wake-up capability disabled by ACPI [ 132.840217] ohci_hcd 0000:00:02.0: PME# disabled [ 132.895449] usb usb1: root hub lost power or was reset [ 132.907049] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005) [ 132.907105] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 132.915553] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 132.915592] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b) [ 132.915657] ALI 5451 0000:00:06.0: restoring config space at offset 0x1 (was 0x2900003, writing 0xc2900003) [ 132.916112] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 132.916148] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 133.210096] pci 0000:00:07.0: PME# disabled [ 133.210123] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [ 133.223453] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b) [ 133.223518] e100 0000:00:0a.0: restoring config space at offset 0x1 (was 0x2900003, writing 0x2900007) [ 133.223557] e100 0000:00:0a.0: wake-up capability disabled by ACPI [ 133.223571] e100 0000:00:0a.0: PME# disabled [ 133.223650] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200) [ 133.287090] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 133.287100] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [ 133.300679] ata1.00: configured for UDMA/33 [ 133.301152] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) [ 133.301277] sd 0:0:0:0: [sda] Write Protect is off [ 133.301287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 133.301481] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 133.543981] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 133.543991] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [ 133.550553] ata2.00: configured for UDMA/33 [ 134.206816] pci 0000:00:12.0: PME# disabled [ 134.206847] pci 0000:01:00.0: PME# disabled [ 134.212275] sd 0:0:0:0: [sda] Starting disk [ 135.540727] eth1: Attempting to download firmware agere_sta_fw.bin [ 135.540762] hermes_dld: AUX enable returned 0 [ 135.541780] hermes_dld: AUX disable returned 0 [ 135.541786] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 135.541793] eth1: Read PDA returned 0 [ 135.623956] hermes_dld: AUX enable returned 0 [ 135.623963] hermes_dld: Enabling volatile, EP 0x000f8000 [ 135.625086] hermes_dld: PROGRAM_ENABLE returned 0 [ 135.625092] eth1: Program init returned 0 [ 135.625100] hermes_dld: Programming block of length 60416 to address 0x001f0000 [ 135.673296] hermes_dld: Programming block of length 4096 to address 0x001ef000 [ 135.676579] eth1: Program returned 0 [ 135.676587] hermes_dld: Found record 0x0003 at debe8c1c [ 135.676607] hermes_dld: Found record 0x0005 at debe8ca8 [ 135.676624] hermes_dld: Found record 0x0008 at debe8cd2 [ 135.676639] hermes_dld: Found record 0x0007 at debe8cc4 [ 135.676656] hermes_dld: Found record 0x0006 at debe8cb6 [ 135.676721] hermes_dld: Found record 0x0110 at debe8d9a [ 135.676753] hermes_dld: Found record 0x0120 at debe8dba [ 135.676784] hermes_dld: Found record 0x0130 at debe8dda [ 135.676815] hermes_dld: Found record 0x0140 at debe8dfa [ 135.676827] hermes_dld: Found record 0x0150 at debe8e02 [ 135.676838] hermes_dld: Using default record 0x0160 at dfabfb60 [ 135.676869] hermes_dld: Found record 0x0101 at debe8d46 [ 135.676883] hermes_dld: Found record 0x0103 at debe8d5c [ 135.676901] hermes_dld: Found record 0x0104 at debe8d6c [ 135.676911] hermes_dld: Found record 0x0105 at debe8d72 [ 135.676922] hermes_dld: Found record 0x0105 at debe8d72 [ 135.676933] hermes_dld: Found record 0x0105 at debe8d72 [ 135.676943] hermes_dld: Found record 0x0107 at debe8d7e [ 135.676954] hermes_dld: Found record 0x0109 at debe8d8c [ 135.676970] hermes_dld: Using default record 0x0161 at dfabfb80 [ 135.677184] eth1: Apply PDA returned 0 [ 135.677247] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000 [ 135.677274] hermes_dld: AUX disable returned 0 [ 135.687916] eth1: Program end returned 0 [ 135.687923] eth1: hermes_present returned 1 [ 135.699834] Restarting tasks ... done. [ 136.042850] eth1: New link status: Connected (0001)
Attachment:
signature.asc
Description: This is a digitally signed message part.
