Hi Greg,
Here are musb fixes, which are ready to get into v4.7-rc2. Please let me
know if any change is needed.
These are all musb bug fixes and omap2430 glue PM fixes.
Regards,
-Bin.
Andrew Goodbody (2):
usb: musb: Ensure rx reinit occurs for shared_fifo endpoints
usb: musb: Stop bulk endpoint while queue is rotated
Bin Liu (4):
usb: musb: host: clear rxcsr error bit if set
usb: musb: host: don't start next rx urb if current one failed
usb: musb: only restore devctl when session was set in backup
usb: musb: host: correct cppi dma channel for isoch transfer
Hans de Goede (2):
usb: musb: sunxi: Add set_mode platform function
usb: musb: sunxi: Set state to A_WAIT_VRISE when enabling Vbus
Sergei Shtylyov (2):
usb: musb: host: move DMA engine check from
musb_tx_dma_set_mode_cppi_tusb() to its caller
usb: musb: host: make musb_tx_dma_set_mode_*() *void*
Tony Lindgren (15):
usb: musb: Fix idling after host mode by increasing autosuspend delay
usb: musb: Remove unnecessary shutdown function
usb: musb: Update to use PM runtime autosuspend
usb: musb: Split PM runtime between wrapper IP and musb core
usb: musb: Remove conditional PM runtime calls for musb_gadget
usb: musb: Use delayed for musb_gadget_pullup
usb: musb: Handle cable status better for 2430 glue layer
usb: musb: Improve PM runtime and phy handling for 2430 glue layer
usb: musb: Remove try_idle for 2430 glue layer
usb: musb: Don't set d+ high before enable for 2430 glue layer
usb: musb: Return error value from musb_mailbox
usb: musb: Remove extra PM runtime calls from 2430 glue layer
usb: musb: Remove pm_runtime_set_irq_safe
usb: musb: Use normal module_init for 2430 glue
usb: phy: Check initial state for twl6030
drivers/phy/phy-twl4030-usb.c | 14 ++-
drivers/usb/musb/musb_core.c | 85 ++++++-------
drivers/usb/musb/musb_core.h | 3 +-
drivers/usb/musb/musb_gadget.c | 34 +++--
drivers/usb/musb/musb_host.c | 68 +++++-----
drivers/usb/musb/omap2430.c | 257 +++++++++++++-------------------------
drivers/usb/musb/sunxi.c | 39 +++---
drivers/usb/phy/phy-twl6030-usb.c | 29 ++++-
include/linux/usb/musb.h | 5 +-
9 files changed, 250 insertions(+), 284 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
