From: Roger Quadros <rogerq@xxxxxx> Don't make any decisions regarding VBUS session based on ID status. That is best left to the OTG core. Pass ID and VBUS events independent of each other so that OTG core knows exactly what to do. This makes dual-role with extcon work with OTG irq on OMAP platforms. Signed-off-by: Roger Quadros <rogerq@xxxxxx> Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx> --- drivers/usb/dwc3/dwc3-omap.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 046bb379120e..29e80cc9b634 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -231,18 +231,14 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, } val = dwc3_omap_read_utmi_ctrl(omap); - val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG - | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID - | USBOTGSS_UTMI_OTG_CTRL_SESSEND); - val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID; + val &= ~USBOTGSS_UTMI_OTG_CTRL_IDDIG; dwc3_omap_write_utmi_ctrl(omap, val); break; case OMAP_DWC3_VBUS_VALID: val = dwc3_omap_read_utmi_ctrl(omap); val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND; - val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG - | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID + val |= USBOTGSS_UTMI_OTG_CTRL_VBUSVALID | USBOTGSS_UTMI_OTG_CTRL_SESSVALID; dwc3_omap_write_utmi_ctrl(omap, val); break; @@ -250,13 +246,15 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, case OMAP_DWC3_ID_FLOAT: if (omap->vbus_reg) regulator_disable(omap->vbus_reg); + val = dwc3_omap_read_utmi_ctrl(omap); + val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG; + dwc3_omap_write_utmi_ctrl(omap, val); case OMAP_DWC3_VBUS_OFF: val = dwc3_omap_read_utmi_ctrl(omap); val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID); - val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND - | USBOTGSS_UTMI_OTG_CTRL_IDDIG; + val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND; dwc3_omap_write_utmi_ctrl(omap, val); break; -- 2.8.3 --------------------------------------------------------------------- Intel Finland Oy Registered Address: PL 281, 00181 Helsinki Business Identity Code: 0357606 - 4 Domiciled in Helsinki This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
