Re: [PATCH v2 5/5] usb: dwc3: rockchip: add devicetree bindings documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

William Wu <william.wu@xxxxxxxxxxxxxx> writes:
> This patch documents the device tree documentation required for
> Rockchip USB3.0 core wrapper consist of USB3.0 IP from Synopsys.
>
> It could operate in device mode (SS, HS, FS) and host
> mode (SS, HS, FS, LS).
>
> Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - add rockchip,dwc3.txt to Documentation/devicetree/bindings/ (Felipe, Brian)
>
>  .../devicetree/bindings/usb/rockchip,dwc3.txt      | 45 ++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> new file mode 100644
> index 0000000..10303d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> @@ -0,0 +1,45 @@
> +Rockchip SuperSpeed DWC3 USB SoC controller
> +
> +Required properties:
> +- compatible:	should contain "rockchip,dwc3"
> +- clocks:		A list of phandle + clock-specifier pairs for the
> +				clocks listed in clock-names
> +- clock-names:	Should contain the following:
> +  "clk_usb3otg0_ref"	Controller reference clk
> +  "clk_usb3otg0_suspend"Controller suspend clk, can use 24 MHz or 32 KHz
> +  "aclk_usb3"		Master/Core clock, have to be >= 62.5 MHz for SS operation
> +
> +
> +Optional clocks:
> +  "aclk_usb3otg0"	Aclk for specific usb controller clock.
> +  "aclk_usb3_rksoc_axi_perf"  USB AXI perf clock.  Not present on all platforms.
> +  "aclk_usb3_grf"	USB grf clock.  Not present on all platforms.
> +
> +Required child node:
> +A child node must exist to represent the core DWC3 IP block. The name of
> +the node is not important. The content of the node is defined in dwc3.txt.
> +
> +Phy documentation is provided in the following places:
> +
> +Example device nodes:
> +
> +	usbdrd3_0: usb@fe800000 {
> +

no reg property?
		compatible = "rockchip,dwc3";
> +		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
> +			 <&cru ACLK_USB3>, <&cru ACLK_USB3OTG0>,
> +			 <&cru ACLK_USB3_RKSOC_AXI_PERF>, <&cru ACLK_USB3_GRF>;
> +		clock-names = "clk_usb3otg0_ref", "clk_usb3otg0_suspend",
> +			      "aclk_usb3", "aclk_usb3otg0",
> +			      "aclk_usb3_rksoc_axi_perf", "aclk_usb3_grf";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		status = "disabled";
> +		usbdrd_dwc3_0: dwc3 {

no address here?

> +			compatible = "snps,dwc3";
> +			reg = <0x0 0xfe800000 0x0 0x100000>;
> +			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> +			dr_mode = "otg";
> +			status = "disabled";
> +		};
> +	};
> -- 
> 1.9.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
balbi

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux