On 05/23/2016 04:40 PM, Sergei Shtylyov wrote:
Ensure that the endpoint is stopped by clearing REQPKT before clearing
DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk
endpoint.
This addresses an issue where a race could result in the endpoint
receiving data before it was reprogrammed resulting in a warning about
such data from musb_rx_reinit before it was thrown away.
The data thrown away was a valid packet that had been correctly ACKed
which meant the host and device got out of sync.
Signed-off-by: Andrew Goodbody <andrew.goodbody@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
V2 added comment about clearing REQPKT before DATAERR_NAKTIMEOUT
drivers/usb/musb/musb_host.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/musb/musb_host.c
b/drivers/usb/musb/musb_host.c index 2966596..676cb98 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -997,6 +997,12 @@ static void musb_bulk_nak_timeout(struct musb
*musb, struct musb_hw_ep *ep,
/* clear nak timeout bit */
rx_csr = musb_readw(epio, MUSB_RXCSR);
rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+ /*
+ * Need to stop the transaction by clearing REQPKT before
Transcation? Maybe transfer?
The quote from the TRM is "If the DATAERR_NAKTIMEOUT bit is set, the
controller can be directed either to continue trying this transaction (until
it times out again) by clearing the DATAERR_NAKTIMEOUT bit or to abort the
transaction by clearing REQPKT bit before clearing the DATAERR_NAKTIMEOUT bit."
So 'transaction' is correct.
OK.
+ * DATAERR_NAKTIMEOUT ref TRM section 16.3.8.2.2.1.2
Which TRM? Do you understand that the MUSB core is used by multiple
SoCs?
I'd recommend referring just to the "abstract" manual or the MUSB
programmer's guide (section 9.2.2 if you want an exact ref.).
That would be the AM335x Sitara Processors TRM. I don't have the MUSB
programmer's guide, is it available online somewhere?
AFAIK, no.
I do not understand what you mean by the "abstract" manual.
Just saying "the manual" or "the manuals".
Would you be OK with "ref MUSB Programmer's Guide section 9.2.2"
Yes.
The full document name is "MUSBMHDRC USB 2.0 HIGH-SPEED DUAL-ROLE
CONTROLLER Programmer’s Guide".
Andrew
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
