[PATCH v2 06/13] usb: dwc2: gadget: Add dwc2_gadget_incr_frame_num()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>

Increases and checks targeted frame number of current ep
if overrun happened, sets flag and masks with DSTS_SOFFN_LIMIT

Added following fields to struct dwc2_hsotg_ep
-target_frame: Targeted frame num to setup next ISOC transfer
-frame_overrun: Indicates SOF number overrun in DSTS

Tested-by: John Keeping <john@xxxxxxxxxxxx>
Signed-off-by: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
 drivers/usb/dwc2/core.h   |  5 +++++
 drivers/usb/dwc2/gadget.c | 19 +++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 3c58d63..22fa1f5 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -150,6 +150,8 @@ struct dwc2_hsotg_req;
  * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
  * @last_load: The offset of data for the last start of request.
  * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
+ * @target_frame: Targeted frame num to setup next ISOC transfer
+ * @frame_overrun: Indicates SOF number overrun in DSTS
  *
  * This is the driver's state for each registered enpoint, allowing it
  * to keep track of transactions that need doing. Each endpoint has a
@@ -187,6 +189,9 @@ struct dwc2_hsotg_ep {
 	unsigned int            isochronous:1;
 	unsigned int            send_zlp:1;
 	unsigned int            has_correct_parity:1;
+	unsigned int            target_frame;
+#define TARGET_FRAME_INITIAL   0xFFFFFFFF
+	bool			frame_overrun;
 
 	char                    name[10];
 };
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 22d4f5b..7f15bc0 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -97,6 +97,25 @@ static inline bool using_dma(struct dwc2_hsotg *hsotg)
 }
 
 /**
+ * dwc2_gadget_incr_frame_num - Increments the targeted frame number.
+ * @hs_ep: The endpoint
+ * @increment: The value to increment by
+ *
+ * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT.
+ * If an overrun occurs it will wrap the value and set the frame_overrun flag.
+ */
+static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep)
+{
+	hs_ep->target_frame += hs_ep->interval;
+	if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) {
+		hs_ep->frame_overrun = 1;
+		hs_ep->target_frame &= DSTS_SOFFN_LIMIT;
+	} else {
+		hs_ep->frame_overrun = 0;
+	}
+}
+
+/**
  * dwc2_hsotg_en_gsint - enable one or more of the general interrupt
  * @hsotg: The device state
  * @ints: A bitmask of the interrupts to enable
-- 
2.8.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux