From: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
According "Table 9-13" of USB2 Specification
For full-/high-speed isochronous endpoints, bInterval value
must be in the range from 1 to 16. The bInterval value
is used as the exponent for a 2^(bInterval-1) value;
Signed-off-by: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
drivers/usb/dwc2/core.h | 2 +-
drivers/usb/dwc2/gadget.c | 11 +++++++----
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 1b37164..f0d20d6 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -139,7 +139,7 @@ struct dwc2_hsotg_req;
* means that it is sending data to the Host.
* @index: The index for the endpoint registers.
* @mc: Multi Count - number of transactions per microframe
- * @interval - Interval for periodic endpoints
+ * @interval - Interval for periodic endpoints, in frames or microframes.
* @name: The name array passed to the USB core.
* @halted: Set if the endpoint has been halted.
* @periodic: Set if this is a periodic ep, such as Interrupt
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 7f15bc0..94322e8 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2693,16 +2693,13 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
hs_ep->periodic = 0;
hs_ep->halted = 0;
hs_ep->interval = desc->bInterval;
- hs_ep->has_correct_parity = 0;
-
- if (hs_ep->interval > 1 && hs_ep->mc > 1)
- dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_ISOC:
epctrl |= DXEPCTL_EPTYPE_ISO;
epctrl |= DXEPCTL_SETEVENFR;
hs_ep->isochronous = 1;
+ hs_ep->interval = 1 << (desc->bInterval - 1);
if (dir_in)
hs_ep->periodic = 1;
break;
@@ -2715,6 +2712,12 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
if (dir_in)
hs_ep->periodic = 1;
+ if (hsotg->gadget.speed == USB_SPEED_LOW ||
+ hsotg->gadget.speed == USB_SPEED_FULL)
+ hs_ep->interval = desc->bInterval;
+ else if (hsotg->gadget.speed == USB_SPEED_HIGH)
+ hs_ep->interval = 1 << (desc->bInterval - 1);
+
epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
break;
--
2.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
