On 11/05/16 15:39, Felipe Balbi wrote:
>
> Hi,
>
> Roger Quadros <rogerq@xxxxxx> writes:
>>>>> static irqreturn_t dwc3_omap_threaded_interrupt(int irq, void *_omap)
>>>>> {
>>>>> struct dwc3_omap *omap = _omap;
>>>>> u32 reg;
>>>>>
>>>>> spin_lock(&omap->lock);
>>>>
>>>> Do we really need a spin_lock for the dwc3-omap driver?
>>>> Currently we won't be doing anything other than just
>>>> clearing the irqstatus and re-enabling the interrupts.
>>>
>>> well, if there's no possibility of races, then no. But only testing will
>>> say for sure, I guess. I didn't really go through the entire thing just
>>> to a write a quick little template :-p
>>>
>> OK. Another hurdle I have is that how do I mask/unmask the interrupts?
>> I do not see any masking bits, only enable/disable bits.
>>
>> I don't think we can use the enable/disable bits to mask as we'd loose
>> events while the event is disabled.
>
> I'm pretty sure your TRM discusses the usage of IRQSTATUS_RAW*
> registers, doesn't it ? :-)
It does and also says that it is mostly for debug. But I don't mind using it
if it solves our problem :).
>
> Those registers should be modified by HW even when interrupts are
> disabled/masked. Note that, the IRQSTATUS_SET* and IRQSTATUS_CLR*
> registers act more like mask/unmask than enable/disable considering we
> can still read IRQ status using *RAW* registers.
>
> See if below works fine for OMAP5, AM4 and AM5 SoCs:
>
> diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
> index af264493bbae..ece2f25ad2c3 100644
> --- a/drivers/usb/dwc3/dwc3-omap.c
> +++ b/drivers/usb/dwc3/dwc3-omap.c
> @@ -165,20 +165,20 @@ static void dwc3_omap_write_utmi_ctrl(struct dwc3_omap *omap, u32 value)
>
> static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap)
> {
> - return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 -
> + return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_RAW_0 -
> omap->irq0_offset);
> }
>
> static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value)
> {
> - dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0 -
> + dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_RAW_0 -
> omap->irq0_offset, value);
We shouldn't write to RAW here as it will trigger a software IRQ instead of
clearing the event.
>
> }
>
> static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap)
> {
> - return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC +
> + return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_RAW_MISC +
> omap->irqmisc_offset);
> }
>
>
The rest is fine. It seemed to work on omap5. I'll do more tests though.
Thanks for the hint :)
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
