[RFC PATCH v2 4/4] ARM: dts: vf-colibri: USB device/host switch using extcon gpio

[Sanchayan Maity <maitysanchayan@xxxxxxxxx>]

Use USBC_DET feature of standard Colibri SODIMM pin 137 for USB
device/host switching using the generic extcon USB gpio implementation.

Signed-off-by: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
---
 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 12 ++++++++++++
 arch/arm/boot/dts/vf-colibri.dtsi         |  7 +++++++
 2 files changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index a8a8e43..a012f80 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -50,6 +50,14 @@
 		clock-frequency = <16000000>;
 	};
 
+	extcon_usbc_det: usbc_det {
+		compatible = "linux,extcon-usb-gpio";
+		debounce = <25>;
+		id-gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
 	panel: panel {
 		compatible = "edt,et057090dhu";
 		backlight = <&bl>;
@@ -162,6 +170,10 @@
 	status = "okay";
 };
 
+&usbdev0 {
+	extcon = <&extcon_usbc_det>, <&extcon_usbc_det>;
+};
+
 &usbh1 {
 	vbus-supply = <&reg_usbh_vbus>;
 };
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index b741709..a7a3e88 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -174,6 +174,7 @@
 
 &usbdev0 {
 	disable-over-current;
+	dr_mode = "otg";
 	status = "okay";
 };
 
@@ -362,6 +363,12 @@
 			>;
 		};
 
+		pinctrl_usbc_det: gpio_usbc_det {
+			fsl,pins = <
+				VF610_PAD_PTC29__GPIO_102		0x22ed
+			>;
+		};
+
 		pinctrl_usbh1_reg: gpio_usb_vbus {
 			fsl,pins = <
 				VF610_PAD_PTD4__GPIO_83			0x22ed
-- 
2.8.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html