The MUSB Programming Guide states that the driver should clear RXCSR
bit2 when the controller sets the bit.
Signed-off-by: Bin Liu <b-liu@xxxxxx>
---
drivers/usb/musb/musb_host.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 58487a4..90c6115 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1870,6 +1870,9 @@ void musb_host_rx(struct musb *musb, u8 epnum)
status = -EPROTO;
musb_writeb(epio, MUSB_RXINTERVAL, 0);
+ rx_csr &= ~MUSB_RXCSR_H_ERROR;
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
if (USB_ENDPOINT_XFER_ISOC != qh->type) {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
