[PATCH 3/4] usb: dwc3: make usb2 phy interface configurable in DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add snps,phyif_utmi_16_bits devicetree property. USB2 phy
interface is hardware property, and it's platform dependent,
so we need to configure it in devicetree to set the core to
support a UTMI+ PHY with an 8- or 16-bit interface.

And refer to the dwc3 databook, the GUSB2PHYCFG.USBTRDTIM
must set to the corresponding value according to the usb2
phy interface.

Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/dwc3.txt |  2 ++
 drivers/usb/dwc3/core.c                        | 13 +++++++++++++
 drivers/usb/dwc3/core.h                        |  8 ++++++++
 drivers/usb/dwc3/platform_data.h               |  1 +
 4 files changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 1ada121..c5e72c8 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -19,6 +19,8 @@ Optional properties:
 	Only really useful for FPGA builds.
  - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
  - snps,lpm-nyet-threshold: LPM NYET threshold
+ - snps,phyif_utmi_16_bits: true when configure the core to support
+			UTMI+ PHY with an 16-bit interface.
  - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk
  - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
  - snps,req_p1p2p3_quirk: when set, the core will always request for
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 8bcd3cc..0205196 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -410,6 +410,7 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
 static int dwc3_phy_setup(struct dwc3 *dwc)
 {
 	u32 reg;
+	u32 usbtrdtim;
 	int ret;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
@@ -505,6 +506,15 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 	if (dwc->dis_u2_freeclk_exists_quirk)
 		reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
 
+	if (dwc->phyif_utmi_16_bits)
+		reg |= DWC3_GUSB2PHYCFG_PHYIF;
+
+	usbtrdtim = (reg & DWC3_GUSB2PHYCFG_PHYIF) ?
+		    USBTRDTIM_UTMI_16_BIT : USBTRDTIM_UTMI_8_BIT;
+
+	reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
+	reg |= (usbtrdtim << DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT);
+
 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 
 	return 0;
@@ -879,6 +889,8 @@ static int dwc3_probe(struct platform_device *pdev)
 				&hird_threshold);
 	dwc->usb3_lpm_capable = device_property_read_bool(dev,
 				"snps,usb3_lpm_capable");
+	dwc->phyif_utmi_16_bits = device_property_read_bool(dev,
+				  "snps,phyif_utmi_16_bits");
 
 	dwc->disable_scramble_quirk = device_property_read_bool(dev,
 				"snps,disable_scramble_quirk");
@@ -926,6 +938,7 @@ static int dwc3_probe(struct platform_device *pdev)
 			hird_threshold = pdata->hird_threshold;
 
 		dwc->usb3_lpm_capable = pdata->usb3_lpm_capable;
+		dwc->phyif_utmi_16_bits = pdata->phyif_utmi_16_bits;
 		dwc->dr_mode = pdata->dr_mode;
 
 		dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index ac2e6b5..1736f87 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -200,6 +200,11 @@
 #define DWC3_GUSB2PHYCFG_SUSPHY		(1 << 6)
 #define DWC3_GUSB2PHYCFG_ULPI_UTMI	(1 << 4)
 #define DWC3_GUSB2PHYCFG_ENBLSLPM	(1 << 8)
+#define DWC3_GUSB2PHYCFG_PHYIF		(1 << 3)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK	(0xf << 10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT	10
+#define USBTRDTIM_UTMI_8_BIT		9
+#define USBTRDTIM_UTMI_16_BIT		5
 
 /* Global USB2 PHY Vendor Control Register */
 #define DWC3_GUSB2PHYACC_NEWREGREQ	(1 << 25)
@@ -759,6 +764,8 @@ struct dwc3_scratchpad_array {
  * @start_config_issued: true when StartConfig command has been issued
  * @three_stage_setup: set if we perform a three phase setup
  * @usb3_lpm_capable: set if hadrware supports Link Power Management
+ * @phyif_utmi_16_bits: set if configure the core to support UTMI+ PHY
+ *			with an 16-bit interface
  * @disable_scramble_quirk: set if we enable the disable scramble quirk
  * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
  * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
@@ -904,6 +911,7 @@ struct dwc3 {
 	unsigned		setup_packet_pending:1;
 	unsigned		three_stage_setup:1;
 	unsigned		usb3_lpm_capable:1;
+	unsigned		phyif_utmi_16_bits:1;
 
 	unsigned		disable_scramble_quirk:1;
 	unsigned		u2exit_lfps_quirk:1;
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index e1a1631..2ce5e2f 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -24,6 +24,7 @@ struct dwc3_platform_data {
 	enum usb_device_speed maximum_speed;
 	enum usb_dr_mode dr_mode;
 	bool usb3_lpm_capable;
+	bool phyif_utmi_16_bits;
 
 	unsigned is_utmi_l1_suspend:1;
 	u8 hird_threshold;
-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux