On Fri, Apr 15, 2016 at 11:14:04PM +0200, Grigori Goronzy wrote:
> This may fail, do not assume it always works.
>
> Signed-off-by: Grigori Goronzy <greg@xxxxxxxxxxxx>
> ---
> drivers/usb/serial/ch341.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
> index c73808f..63df8ce 100644
> --- a/drivers/usb/serial/ch341.c
> +++ b/drivers/usb/serial/ch341.c
> @@ -544,9 +544,7 @@ static int ch341_reset_resume(struct usb_serial *serial)
> priv = usb_get_serial_port_data(serial->port[0]);
>
> /* reconfigure ch341 serial port after bus-reset */
> - ch341_configure(serial->dev, priv);
> -
> - return 0;
> + return ch341_configure(serial->dev, priv);
This is correct, but have noticed that resume is currently broken in
that the interrupt urb is never resubmitted on resume in case the port is
already open?
Also ch341_configure must not use GFP_KERNEL either if called from a
resume path (use GFP_NOIO).
Care to fix this up as well?
> }
>
> static struct usb_serial_driver ch341_device = {
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
