Hi,
On 04/28/2016 02:42 PM, Arnd Bergmann wrote:
> With the addition of VUDC, the USBIP stack can now be used on
> configurations without USB host support, but trying to build
Not exactly. This is the goal but unfortunately for now this will not
work... Most of USB_IP common functions operates on urbs for now because
what USB protocol is sending us is really an serialized URB.
That's why we are also using urbs so we need urb_alloc() and urb_free()
routines which are a part of USB host side support. You may disable all
host side controllers but host side support must remind enabled for now:(
I have a plan to refactor USBIP code and remove those but for now vudc
needs those functions.
> it with USB gadget support disabled fails with
>
> drivers/usb/built-in.o: In function `vep_dequeue':
> vudc_main.c:(.text+0xa6ddc): undefined reference to `usb_gadget_giveback_request'
> drivers/usb/built-in.o: In function `nuke':
> vudc_main.c:(.text+0xa6ea8): undefined reference to `usb_gadget_giveback_request'
> drivers/usb/built-in.o: In function `vudc_device_reset':
> vudc_main.c:(.text+0xa720c): undefined reference to `usb_gadget_udc_reset'
> drivers/usb/built-in.o: In function `vudc_probe':
>
> This addresses both issues, by changing the dependency for USBIP_CORE
> to USB_COMMON, and adding additional dependencies on USB or USB_GADGET
> for the individual portions as needed.
>
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> Fixes: 9360575c5837 ("usbip: vudc: Add vudc to Kconfig")
> ---
> drivers/usb/usbip/Kconfig | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig
> index ebf4ff050890..17646b25343f 100644
> --- a/drivers/usb/usbip/Kconfig
> +++ b/drivers/usb/usbip/Kconfig
> @@ -1,6 +1,6 @@
> config USBIP_CORE
> tristate "USB/IP support"
> - depends on USB && NET
> + depends on USB_COMMON && NET
> ---help---
> This enables pushing USB packets over IP to allow remote
> machines direct access to USB devices. It provides the
> @@ -16,7 +16,7 @@ config USBIP_CORE
>
> config USBIP_VHCI_HCD
> tristate "VHCI hcd"
> - depends on USBIP_CORE
> + depends on USBIP_CORE && USB
> ---help---
> This enables the USB/IP virtual host controller driver,
> which is run on the remote machine.
> @@ -26,7 +26,7 @@ config USBIP_VHCI_HCD
>
> config USBIP_HOST
> tristate "Host driver"
> - depends on USBIP_CORE
> + depends on USBIP_CORE && USB
> ---help---
> This enables the USB/IP host driver, which is run on the
> machine that is sharing the USB devices.
> @@ -36,7 +36,7 @@ config USBIP_HOST
>
> config USBIP_VUDC
> tristate "VUDC driver"
> - depends on USBIP_CORE
> + depends on USBIP_CORE && USB_GADGET
So having in mind what I wrote you above about urs I would suggest
changing this line to:
depends on USBIP_CORE && USB_GADGET && USB
And we can remove this in a future when we will refactor usbip code.
Best regards,
--
Krzysztof Opasiak
Samsung R&D Institute Poland
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
