Fix soft lockup when resetting remote device attached
to usb host. Configuration:
pppd -> musb hub -> usb-serial -> gsm modem
When gsm modem resets, musb rolls in incoming rx interrupts
which does not give any time to other application as result
it totally lock ups. Solution is to keep original logic for RXCSR_H_ERROR
and merge RXCSR_DATAERROR and RXCSR_H_ERROR branches to call same code
for setting rx stall with MUSB_RXCSR_H_WZC_BITS.
Signed-off-by: Max Uvarov <muvarov@xxxxxxxxx>
---
v2: use bitwise or for error flags before logical and. (Sergei Shtylyov).
drivers/usb/musb/musb_host.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index c3d5fc9..2d9aa78 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1592,14 +1592,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
/* stall; record URB status */
status = -EPIPE;
+ } else if (rx_csr & (MUSB_RXCSR_DATAERROR | MUSB_RXCSR_H_ERROR)) {
- } else if (rx_csr & MUSB_RXCSR_H_ERROR) {
- dev_dbg(musb->controller, "end %d RX proto error\n", epnum);
-
- status = -EPROTO;
- musb_writeb(epio, MUSB_RXINTERVAL, 0);
-
- } else if (rx_csr & MUSB_RXCSR_DATAERROR) {
+ if (rx_csr & MUSB_RXCSR_H_ERROR) {
+ status = -EPROTO;
+ musb_writeb(epio, MUSB_RXINTERVAL, 0);
+ }
if (USB_ENDPOINT_XFER_ISOC != qh->type) {
dev_dbg(musb->controller, "RX end %d NAK timeout\n", epnum);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
