Re: 4.5.1: UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:9

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

thank you for your answer.

Greg KH wrote:
On Thu, Apr 21, 2016 at 12:22:49AM +0200, Martin MOKREJŠ wrote:
Hi,
  I am not certain to to forward this to, so I am trying linux-usb and ext4. Please add relevant people/lists, thank you.

# dmesg | grep "UBSAN: Undefined behaviour"
[    2.638843] UBSAN: Undefined behaviour in drivers/usb/host/ehci-hub.c:873:47
[    8.553620] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2612:15
[   25.341048] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1274:11
[   41.460542] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:9
#

Full dmesg is attached.

Hope this helps,
Martin

[    0.000000] Linux version 4.5.1-default-pciehp (root@vostro) (gcc version 5.3.0 (Gentoo 5.3.0 p1.0, pie-0.6.5) ) #1 SMP Thu Apr 14 14:17:48 CEST 2016

Please try 4.6-rc4, a number of UBSAN issues have been fixed there.

They are still present:

# dmesg | grep "UBSAN: Undefined behaviour"
[    3.113405] UBSAN: Undefined behaviour in drivers/usb/host/ehci-hub.c:877:47
[    5.678949] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2619:15
[   18.345599] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1281:11
[   34.544363] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:9
#

Updated dmesg is attached.
Martin
[    0.000000] Linux version 4.6.0-rc4-default-pciehp (root@vostro) (gcc version 5.3.0 (Gentoo 5.3.0 p1.0, pie-0.6.5) ) #1 SMP Thu Apr 21 10:24:31 CEST 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6-rc4 root=/dev/sda5 ro slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 intel_idle.max_cstate=c3 i915.i915_enable_rc6=1 usbcore.autosuspend=-1
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da4e4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da4e5000-0x00000000da527fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da528000-0x00000000da792fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da793000-0x00000000da966fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da967000-0x00000000daa88fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000daa89000-0x00000000dad67fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 400000000 mask FE0000000 write-back
[    0.000000]   2 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 base 41FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x048bb000, 0x048bbfff] PGTABLE
[    0.000000] BRK [0x048bc000, 0x048bcfff] PGTABLE
[    0.000000] BRK [0x048bd000, 0x048bdfff] PGTABLE
[    0.000000] BRK [0x048be000, 0x048befff] PGTABLE
[    0.000000] BRK [0x048bf000, 0x048bffff] PGTABLE
[    0.000000] BRK [0x048c0000, 0x048c0fff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000DAFE8078 000074 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DAFF1D38 0000F4 (v04 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DAFE8180 009BB6 (v02 DELL   WN09     00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DAFE3F80 000040
[    0.000000] ACPI: APIC 0x00000000DAFF1E30 000072 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DAFF1EA8 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DAFF1EE8 0004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: SLIC 0x00000000DAFF2398 000176 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000DAFF2510 000038 (v01 DELL   WN09     01072009 AMI. 00000004)
[    0.000000] ACPI: SSDT 0x00000000DAFF2548 000846 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DAFF2D90 000996 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000DAFF3728 0000E8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: OSFR 0x00000000DAFF3810 000086 (v01 DELL   M08      07DE0212 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000da4e4fff]
[    0.000000]   node   0: [mem 0x00000000da528000-0x00000000da792fff]
[    0.000000]   node   0: [mem 0x00000000da967000-0x00000000daa88fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[    0.000000] On node 0 totalpages: 4170254
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13906 pages used for memmap
[    0.000000]   DMA32 zone: 889970 pages, LIFO batch:31
[    0.000000]   Normal zone: 51192 pages used for memmap
[    0.000000]   Normal zone: 3276288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xda4e5000-0xda527fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda793000-0xda966fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaa89000-0xdad67fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdad68000-0xdafe7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdafe8000-0xdaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88041fa00000 s93064 r8192 d29816 u524288
[    0.000000] pcpu-alloc: s93064 r8192 d29816 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4104936
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6-rc4 root=/dev/sda5 ro slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 intel_idle.max_cstate=c3 i915.i915_enable_rc6=1 usbcore.autosuspend=-1
[    0.000000] Booting kernel: `c3' invalid for parameter `intel_idle.max_cstate'
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Memory: 16268388K/16681016K available (18446K kernel code, 14932K rwdata, 4496K rodata, 1192K init, 15292K bss, 412628K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Running RCU self tests
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:4352 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 8159 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2793.484 MHz processor
[    0.000071] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.96 BogoMIPS (lpj=27934840)
[    0.000229] pid_max: default: 32768 minimum: 301
[    0.000336] ACPI: Core revision 20160108
[    0.074621] ACPI: 4 ACPI AML tables successfully acquired and loaded

[    0.074729] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.074814] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.075987] CPU: Physical Processor ID: 0
[    0.076065] CPU: Processor Core ID: 0
[    0.076144] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.076224] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.076307] mce: CPU supports 7 MCE banks
[    0.076408] CPU0: Thermal monitoring enabled (TM1)
[    0.076495] process: using mwait in idle threads
[    0.076588] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.076667] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.077321] Freeing SMP alternatives memory: 36K (ffffffff839c1000 - ffffffff839ca000)
[    0.287916] smpboot: Max logical packages: 2
[    0.287995] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.288080] DMAR: Host address width 36
[    0.288156] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.288266] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.288378] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.288469] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.288584] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[    0.288666] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.288753] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.288834] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.288911] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.289397] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.289477] x2apic enabled
[    0.289556] Switched APIC routing to cluster x2apic.
[    0.290489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.390587] TSC deadline timer enabled
[    0.390592] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.390851] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.391183] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.391273] ... version:                3
[    0.391349] ... bit width:              48
[    0.391425] ... generic registers:      4
[    0.391501] ... value mask:             0000ffffffffffff
[    0.391580] ... max period:             0000ffffffffffff
[    0.391659] ... fixed-purpose events:   3
[    0.391735] ... event mask:             000000070000000f
[    0.393976] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.394632] x86: Booting SMP configuration:
[    0.394711] .... node  #0, CPUs:      #1 #2 #3
[    0.842885] x86: Booted up 1 node, 4 CPUs
[    0.843037] smpboot: Total of 4 processors activated (22353.40 BogoMIPS)
[    0.847599] devtmpfs: initialized
[    0.849106] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
[    0.849344] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
[    0.850999] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.851287] xor: automatically using best checksumming function:
[    0.950838]    avx       : 25712.400 MB/sec
[    0.950931] pinctrl core: initialized pinctrl subsystem
[    0.951714] NET: Registered protocol family 16
[    0.980961] cpuidle: using governor ladder
[    1.040979] cpuidle: using governor menu
[    1.041285] ACPI: bus type PCI registered
[    1.042437] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    1.042557] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    1.042653] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    1.042825] PCI: Using configuration type 1 for base access
[    1.043006] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    1.091578] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.261083] raid6: sse2x1   gen()  6453 MB/s
[    1.431132] raid6: sse2x1   xor()  4946 MB/s
[    1.601183] raid6: sse2x2   gen()  8575 MB/s
[    1.771235] raid6: sse2x2   xor()  6130 MB/s
[    1.941287] raid6: sse2x4   gen() 10159 MB/s
[    2.111337] raid6: sse2x4   xor()  7829 MB/s
[    2.111414] raid6: using algorithm sse2x4 gen() 10159 MB/s
[    2.111493] raid6: .... xor() 7829 MB/s, rmw enabled
[    2.111571] raid6: using ssse3x2 recovery algorithm
[    2.111817] ACPI: Added _OSI(Module Device)
[    2.111895] ACPI: Added _OSI(Processor Device)
[    2.111974] ACPI: Added _OSI(3.0 _SCP Extensions)
[    2.112052] ACPI: Added _OSI(Processor Aggregator Device)
[    2.115180] ACPI: Executed 1 blocks of module-level executable AML code
[    2.161210] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    2.174698] ACPI: Dynamic OEM Table Load:
[    2.174713] ACPI: SSDT 0xFFFF88040CBF0008 00064F (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    2.179285] ACPI: Dynamic OEM Table Load:
[    2.179297] ACPI: SSDT 0xFFFF88040CD14628 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    2.183140] ACPI: Dynamic OEM Table Load:
[    2.183151] ACPI: SSDT 0xFFFF88040CBFCCC8 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    2.191514] ACPI: Interpreter enabled
[    2.191688] ACPI: (supports S0 S1 S3 S4 S5)
[    2.191766] ACPI: Using IOAPIC for interrupt routing
[    2.192042] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.311438] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    2.311533] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    2.313706] acpi PNP0A08:00: _OSC: platform does not support [PME]
[    2.315735] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[    2.319026] PCI host bridge to bus 0000:00
[    2.319109] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    2.319195] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.319278] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.319392] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    2.319509] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    2.319625] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    2.319740] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    2.319854] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    2.319970] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    2.320085] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    2.320201] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    2.320315] pci_bus 0000:00: root bus resource [bus 00-3e]
[    2.320404] pci_bus 0000:00: scanning bus
[    2.320458] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    2.320468] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x30
[    2.321279] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    2.321294] pci 0000:00:02.0: reg 0x10: [mem 0xf6800000-0xf6bfffff 64bit]
[    2.321303] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    2.321309] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    2.322205] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    2.322247] pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[    2.322394] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    2.322424] pci 0000:00:16.0: PME# disabled
[    2.323189] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    2.323226] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff]
[    2.323395] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    2.323401] pci 0000:00:1a.0: PME# disabled
[    2.331579] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    2.331914] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    2.331948] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
[    2.332115] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    2.332121] pci 0000:00:1b.0: PME# disabled
[    2.332711] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    2.333046] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    2.333139] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x40
[    2.333211] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    2.333217] pci 0000:00:1c.0: PME# disabled
[    2.333260] pci 0000:00:1c.0: Disabling UPDCR peer decodes
[    2.333346] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    2.333426] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    2.334076] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    2.334401] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    2.334492] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x40
[    2.334565] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    2.334571] pci 0000:00:1c.1: PME# disabled
[    2.334604] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    2.334685] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    2.335336] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    2.335662] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    2.335766] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x40
[    2.335839] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    2.335845] pci 0000:00:1c.3: PME# disabled
[    2.335878] pci 0000:00:1c.3: Enabling MPC IRBNCE
[    2.335958] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[    2.336626] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    2.336957] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    2.337049] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x40
[    2.337126] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    2.337132] pci 0000:00:1c.4: PME# disabled
[    2.337165] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    2.337246] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    2.337906] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    2.338240] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    2.338332] pci 0000:00:1c.7: calling pci_fixup_transparent_bridge+0x0/0x40
[    2.338408] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    2.338415] pci 0000:00:1c.7: PME# disabled
[    2.338448] pci 0000:00:1c.7: Enabling MPC IRBNCE
[    2.338528] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[    2.339185] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    2.339513] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    2.339549] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
[    2.339723] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    2.339730] pci 0000:00:1d.0: PME# disabled
[    2.347626] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    2.347963] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[    2.348890] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    2.348920] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    2.348936] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    2.348951] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    2.348967] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    2.348982] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    2.348997] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff]
[    2.349106] pci 0000:00:1f.2: PME# supported from D3hot
[    2.349112] pci 0000:00:1f.2: PME# disabled
[    2.349896] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    2.349926] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
[    2.349967] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    2.350755] pci_bus 0000:00: fixups for bus
[    2.350760] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 0
[    2.350957] pci_bus 0000:03: scanning bus
[    2.350961] pci_bus 0000:03: fixups for bus
[    2.350964] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    2.351059] pci_bus 0000:03: bus scan returning with max=03
[    2.351065] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 0
[    2.351238] pci_bus 0000:05: scanning bus
[    2.351273] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    2.351306] pci 0000:05:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    2.351355] pci 0000:05:00.0: reg 0x18: [mem 0xf1104000-0xf1104fff 64bit pref]
[    2.351384] pci 0000:05:00.0: reg 0x20: [mem 0xf1100000-0xf1103fff 64bit pref]
[    2.351577] pci 0000:05:00.0: supports D1 D2
[    2.351579] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.351587] pci 0000:05:00.0: PME# disabled
[    2.351756] pci 0000:05:00.0: System wakeup disabled by ACPI
[    2.362970] pci_bus 0000:05: fixups for bus
[    2.362972] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    2.363056] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    2.363070] pci 0000:00:1c.1:   bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[    2.363072] pci_bus 0000:05: bus scan returning with max=05
[    2.363078] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 0
[    2.363254] pci_bus 0000:09: scanning bus
[    2.363493] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[    2.363785] pci 0000:09:00.0: reg 0x10: [mem 0xf7e00000-0xf7e01fff 64bit]
[    2.365382] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    2.365433] pci 0000:09:00.0: PME# disabled
[    2.365785] pci 0000:09:00.0: System wakeup disabled by ACPI
[    2.383078] pci_bus 0000:09: fixups for bus
[    2.383081] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[    2.383169] pci 0000:00:1c.3:   bridge window [mem 0xf7e00000-0xf7efffff]
[    2.383178] pci_bus 0000:09: bus scan returning with max=09
[    2.383185] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 0
[    2.383362] pci_bus 0000:0b: scanning bus
[    2.383398] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[    2.383439] pci 0000:0b:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    2.383468] pci 0000:0b:00.0: reg 0x18: [mem 0xf7d10000-0xf7d11fff 64bit]
[    2.383671] pci 0000:0b:00.0: supports D1 D2
[    2.383673] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.383680] pci 0000:0b:00.0: PME# disabled
[    2.383867] pci 0000:0b:00.0: System wakeup disabled by ACPI
[    2.384231] pci_bus 0000:0b: fixups for bus
[    2.384233] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[    2.384320] pci 0000:00:1c.4:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    2.384330] pci_bus 0000:0b: bus scan returning with max=0b
[    2.384336] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 0
[    2.384510] pci_bus 0000:11: scanning bus
[    2.384514] pci_bus 0000:11: fixups for bus
[    2.384516] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[    2.384604] pci 0000:00:1c.7:   bridge window [io  0xc000-0xdfff]
[    2.384612] pci 0000:00:1c.7:   bridge window [mem 0xf6c00000-0xf7cfffff]
[    2.384622] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[    2.384624] pci_bus 0000:11: bus scan returning with max=11
[    2.384631] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 1
[    2.384642] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 1
[    2.384654] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 1
[    2.384665] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 1
[    2.384677] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 1
[    2.384686] pci_bus 0000:00: bus scan returning with max=16
[    2.384688] pci_bus 0000:00: on NUMA node 0
[    2.388980] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    2.390056] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[    2.391160] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    2.392260] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    2.393364] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    2.394558] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    2.395749] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    2.397112] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[    2.399309] ACPI: Enabled 4 GPEs in block 00 to 3F
[    2.399963] vgaarb: setting as boot device: PCI:0000:00:02.0
[    2.400045] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    2.400167] vgaarb: loaded
[    2.400241] vgaarb: bridge control possible 0000:00:02.0
[    2.401234] SCSI subsystem initialized
[    2.401498] libata version 3.00 loaded.
[    2.401734] ACPI: bus type USB registered
[    2.401986] usbcore: registered new interface driver usbfs
[    2.402142] usbcore: registered new interface driver hub
[    2.402282] usbcore: registered new device driver usb
[    2.402525] Linux video capture interface: v2.00
[    2.402851] EDAC MC: Ver: 3.0.0
[    2.403735] Advanced Linux Sound Architecture Driver Initialized.
[    2.403917] PCI: Using ACPI for IRQ routing
[    2.405880] PCI: pci_cache_line_size set to 64 bytes
[    2.405891] pci 0000:00:02.0: BAR 0: reserving [mem 0xf6800000-0xf6bfffff flags 0x140204] (d=0, p=0)
[    2.405894] pci 0000:00:02.0: BAR 2: reserving [mem 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0)
[    2.405897] pci 0000:00:02.0: BAR 4: reserving [io  0xf000-0xf03f flags 0x40101] (d=0, p=0)
[    2.405902] pci 0000:00:16.0: BAR 0: reserving [mem 0xf7f0a000-0xf7f0a00f flags 0x140204] (d=0, p=0)
[    2.405907] pci 0000:00:1a.0: BAR 0: reserving [mem 0xf7f08000-0xf7f083ff flags 0x40200] (d=0, p=0)
[    2.405912] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf7f00000-0xf7f03fff flags 0x140204] (d=0, p=0)
[    2.405921] pci 0000:05:00.0: BAR 0: reserving [io  0xe000-0xe0ff flags 0x40101] (d=0, p=0)
[    2.405924] pci 0000:05:00.0: BAR 2: reserving [mem 0xf1104000-0xf1104fff flags 0x14220c] (d=0, p=0)
[    2.405926] pci 0000:05:00.0: BAR 4: reserving [mem 0xf1100000-0xf1103fff flags 0x14220c] (d=0, p=0)
[    2.405935] pci 0000:09:00.0: BAR 0: reserving [mem 0xf7e00000-0xf7e01fff flags 0x140204] (d=0, p=0)
[    2.405942] pci 0000:0b:00.0: BAR 0: reserving [mem 0xf7d00000-0xf7d0ffff flags 0x140204] (d=0, p=0)
[    2.405945] pci 0000:0b:00.0: BAR 2: reserving [mem 0xf7d10000-0xf7d11fff flags 0x140204] (d=0, p=0)
[    2.405951] pci 0000:00:1d.0: BAR 0: reserving [mem 0xf7f07000-0xf7f073ff flags 0x40200] (d=0, p=0)
[    2.405959] pci 0000:00:1f.2: BAR 0: reserving [io  0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0)
[    2.405961] pci 0000:00:1f.2: BAR 1: reserving [io  0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0)
[    2.405964] pci 0000:00:1f.2: BAR 2: reserving [io  0xf090-0xf097 flags 0x40101] (d=0, p=0)
[    2.405966] pci 0000:00:1f.2: BAR 3: reserving [io  0xf080-0xf083 flags 0x40101] (d=0, p=0)
[    2.405969] pci 0000:00:1f.2: BAR 4: reserving [io  0xf060-0xf07f flags 0x40101] (d=0, p=0)
[    2.405971] pci 0000:00:1f.2: BAR 5: reserving [mem 0xf7f06000-0xf7f067ff flags 0x40200] (d=0, p=0)
[    2.405976] pci 0000:00:1f.3: BAR 0: reserving [mem 0xf7f05000-0xf7f050ff flags 0x140204] (d=0, p=0)
[    2.405979] pci 0000:00:1f.3: BAR 4: reserving [io  0xf040-0xf05f flags 0x40101] (d=0, p=0)
[    2.406019] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    2.406031] e820: reserve RAM buffer [mem 0xda4e5000-0xdbffffff]
[    2.406035] e820: reserve RAM buffer [mem 0xda793000-0xdbffffff]
[    2.406040] e820: reserve RAM buffer [mem 0xdaa89000-0xdbffffff]
[    2.406045] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[    2.407112] Bluetooth: Core ver 2.21
[    2.407229] NET: Registered protocol family 31
[    2.407312] Bluetooth: HCI device and connection manager initialized
[    2.407418] Bluetooth: HCI socket layer initialized
[    2.407503] Bluetooth: L2CAP socket layer initialized
[    2.407619] Bluetooth: SCO socket layer initialized
[    2.408875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.409309] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    2.411468] clocksource: Switched to clocksource hpet
[    2.452557] pnp: PnP ACPI init
[    2.453446] system 00:00: [io  0x0680-0x069f] has been reserved
[    2.453533] system 00:00: [io  0x1000-0x100f] has been reserved
[    2.453619] system 00:00: [io  0xffff] has been reserved
[    2.453703] system 00:00: [io  0xffff] has been reserved
[    2.453791] system 00:00: [io  0x0400-0x0453] could not be reserved
[    2.453877] system 00:00: [io  0x0458-0x047f] has been reserved
[    2.453961] system 00:00: [io  0x0500-0x057f] has been reserved
[    2.454047] system 00:00: [io  0x164e-0x164f] has been reserved
[    2.454177] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.454388] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.454841] system 00:02: [io  0x0454-0x0457] has been reserved
[    2.454934] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    2.455294] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    2.455381] system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved
[    2.455467] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.455770] pnp 00:04: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[    2.456082] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    2.458601] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.458689] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    2.458775] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.458859] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.458946] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    2.459030] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.459118] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    2.459204] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    2.459288] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    2.459375] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    2.459460] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    2.459545] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.461527] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[    2.461613] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
[    2.461700] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    2.462094] pnp: PnP ACPI: found 8 devices
[    2.481080] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    2.481278] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    2.481378] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    2.481459] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    2.481570] pci 0000:00:1c.1:   bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[    2.481692] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[    2.481776] pci 0000:00:1c.3:   bridge window [mem 0xf7e00000-0xf7efffff]
[    2.481867] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[    2.481951] pci 0000:00:1c.4:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    2.482045] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[    2.482127] pci 0000:00:1c.7:   bridge window [io  0xc000-0xdfff]
[    2.482213] pci 0000:00:1c.7:   bridge window [mem 0xf6c00000-0xf7cfffff]
[    2.482298] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[    2.482417] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    2.482419] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    2.482421] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    2.482423] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    2.482425] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    2.482427] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    2.482429] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    2.482431] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    2.482433] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    2.482435] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[    2.482437] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
[    2.482439] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    2.482441] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[    2.482443] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[    2.482445] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    2.482447] pci_bus 0000:11: resource 0 [io  0xc000-0xdfff]
[    2.482449] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[    2.482451] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[    2.482575] NET: Registered protocol family 2
[    2.483191] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    2.483496] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[    2.487239] TCP: Hash tables configured (established 131072 bind 65536)
[    2.487440] UDP hash table entries: 8192 (order: 8, 1310720 bytes)
[    2.488498] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes)
[    2.489730] NET: Registered protocol family 1
[    2.490201] RPC: Registered named UNIX socket transport module.
[    2.490281] RPC: Registered udp transport module.
[    2.490359] RPC: Registered tcp transport module.
[    2.490437] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.490537] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x130
[    2.490543] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.490665] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x820
[    2.612641] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x820
[    2.732410] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x820
[    2.733686] PCI: CLS 64 bytes, default 64
[    2.734076] DMAR: No ATSR found
[    2.734314] DMAR: dmar0: Using Queued invalidation
[    2.734614] DMAR: dmar1: Using Queued invalidation
[    2.734707] DMAR: Setting RMRR:
[    2.734857] DMAR: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
[    2.735343] DMAR: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
[    2.735493] DMAR: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
[    2.736302] DMAR: Prepare 0-16MiB unity mapping for LPC
[    2.736419] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    2.736804] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    2.737452] iommu: Adding device 0000:00:00.0 to group 0
[    2.737614] iommu: Adding device 0000:00:02.0 to group 1
[    2.737784] iommu: Adding device 0000:00:16.0 to group 2
[    2.737936] iommu: Adding device 0000:00:1a.0 to group 3
[    2.738088] iommu: Adding device 0000:00:1b.0 to group 4
[    2.738255] iommu: Adding device 0000:00:1c.0 to group 5
[    2.738414] iommu: Adding device 0000:00:1c.1 to group 6
[    2.738572] iommu: Adding device 0000:00:1c.3 to group 7
[    2.738732] iommu: Adding device 0000:00:1c.4 to group 8
[    2.738890] iommu: Adding device 0000:00:1c.7 to group 9
[    2.739046] iommu: Adding device 0000:00:1d.0 to group 10
[    2.739224] iommu: Adding device 0000:00:1f.0 to group 11
[    2.739360] iommu: Adding device 0000:00:1f.2 to group 11
[    2.739493] iommu: Adding device 0000:00:1f.3 to group 11
[    2.739649] iommu: Adding device 0000:05:00.0 to group 12
[    2.739803] iommu: Adding device 0000:09:00.0 to group 13
[    2.739961] iommu: Adding device 0000:0b:00.0 to group 14
[    2.743591] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    2.743705] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    2.743784] RAPL PMU: hw unit of domain package 2^-16 Joules
[    2.743863] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    2.754155] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    2.754372] audit: initializing netlink subsys (disabled)
[    2.754508] audit: type=2000 audit(1461237201.550:1): initialized
[    2.757048] workingset: timestamp_bits=60 max_order=22 bucket_order=0
[    2.792461] NET: Registered protocol family 38
[    2.792634] Key type asymmetric registered
[    2.792731] Asymmetric key parser 'x509' registered
[    2.793123] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    2.793266] io scheduler noop registered
[    2.793354] io scheduler deadline registered (default)
[    2.793913] io scheduler cfq registered
[    2.793999] start plist test
[    2.796950] end plist test
[    2.800796] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.800933] pciehp 0000:00:1c.7:pcie04: Slot Capabilities      : 0x003cb260
[    2.801017] pciehp 0000:00:1c.7:pcie04: Slot Status            : 0x0000
[    2.801101] pciehp 0000:00:1c.7:pcie04: Slot Control           : 0x0000
[    2.801188] pciehp 0000:00:1c.7:pcie04: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    2.801444] pci_bus 0000:11: dev 00, created physical slot 7
[    2.801713] pciehp 0000:00:1c.7:pcie04: pcie_enable_notification: SLOTCTRL 58 write cmd 1038
[    2.801723] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 1028
[    2.801726] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
[    2.801795] pciehp: pcie_port_service_register = 0
[    2.801797] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.802105] intel_idle: MWAIT substates: 0x21120
[    2.802108] intel_idle: v0.4.1 model 0x2A
[    2.803527] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.804006] ACPI: AC Adapter [AC] (on-line)
[    2.804538] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.806707] ACPI: Lid Switch [LID0]
[    2.807052] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.807208] ACPI: Power Button [PWRB]
[    2.807542] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    2.807665] ACPI: Sleep Button [SBTN]
[    2.807995] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.808116] ACPI: Power Button [PWRF]
[    2.837813] thermal LNXTHERM:00: registered as thermal_zone0
[    2.837896] ACPI: Thermal Zone [THM] (62 C)
[    2.838376] GHES: HEST is not enabled!
[    2.838468] ERST DBG: ERST support is disabled.
[    2.888284] ACPI: Battery Slot [BAT0] (battery present)
[    2.957590] Non-volatile memory driver v1.3
[    2.958005] Linux agpgart interface v0.103
[    2.958183] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    2.958291] [drm] Initialized drm 1.1.0 20060810
[    2.962489] [drm] DMAR active, disabling use of stolen memory
[    2.962572] [drm] Memory usable by graphics device = 2048M
[    2.962651] [drm] VT-d active for gfx access
[    2.962728] [drm] Disabling PPGTT because VT-d is on
[    2.962839] [drm] Replacing VGA console driver
[    2.963692] Console: switching to colour dummy device 80x25
[    2.971099] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.971107] [drm] Driver supports precise vblank timestamp query.
[    2.973295] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.003602] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.007111] acpi device:34: registered as cooling_device4
[    3.007792] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    3.007962] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[    3.019929] loop: module loaded
[    3.031201] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255)
[    3.031214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.031236] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    3.031246] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.031265] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    3.031274] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.031293] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    3.031302] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.031316] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.031801] Loading iSCSI transport class v2.0-870.
[    3.033294] ahci 0000:00:1f.2: version 3.0
[    3.034393] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.044605] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[    3.044619] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    3.087520] scsi host0: ahci
[    3.088698] scsi host1: ahci
[    3.089242] scsi host2: ahci
[    3.089776] scsi host3: ahci
[    3.090302] scsi host4: ahci
[    3.090830] scsi host5: ahci
[    3.091227] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 29
[    3.091244] ata2: DUMMY
[    3.091253] ata3: DUMMY
[    3.091261] ata4: DUMMY
[    3.091270] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 29
[    3.091281] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 29
[    3.092380] tun: Universal TUN/TAP device driver, 1.6
[    3.092387] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    3.092741] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.093048] r8169 0000:05:00.0: enabling Mem-Wr-Inval
[    3.094111] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000030000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 30
[    3.094124] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.094277] VMware vmxnet3 virtual NIC driver - version 1.4.6.0-k-NAPI
[    3.094558] usbcore: registered new interface driver cdc_ncm
[    3.094662] usbcore: registered new interface driver huawei_cdc_ncm
[    3.094765] usbcore: registered new interface driver cdc_mbim
[    3.094858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.094888] ehci-pci: EHCI PCI platform driver
[    3.095609] ehci-pci 0000:00:1a.0: enabling bus mastering
[    3.095670] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    3.095839] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.095906] ehci-pci 0000:00:1a.0: debug port 2
[    3.099890] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    3.099973] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000
[    3.109521] fbcon: inteldrmfb (fb0) is primary device
[    3.111578] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.112057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.112059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.112060] usb usb1: Product: EHCI Host Controller
[    3.112061] usb usb1: Manufacturer: Linux 4.6.0-rc4-default-pciehp ehci_hcd
[    3.112062] usb usb1: SerialNumber: 0000:00:1a.0
[    3.113367] hub 1-0:1.0: USB hub found
[    3.113404] ================================================================================
[    3.113405] UBSAN: Undefined behaviour in drivers/usb/host/ehci-hub.c:877:47
[    3.113407] index -1 is out of range for type 'u32 [1]'
[    3.113409] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc4-default-pciehp #1
[    3.113409] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[    3.113412]  ffffffffffffffff ffff88040d92f358 ffffffff816d7db5 ffffffff811a1d72
[    3.113414]  ffff88040d92f380 ffffffffffffffff ffff88040d92f370 ffffffff8175ad1d
[    3.113416]  ffffffff8337e1a0 ffff88040d92f3c0 ffffffff8175b3d7 0000000000000292
[    3.113416] Call Trace:
[    3.113421]  [<ffffffff816d7db5>] dump_stack+0x68/0xa3
[    3.113424]  [<ffffffff811a1d72>] ? down_trylock+0x32/0x60
[    3.113427]  [<ffffffff8175ad1d>] ubsan_epilogue+0xd/0x40
[    3.113428]  [<ffffffff8175b3d7>] __ubsan_handle_out_of_bounds+0x67/0x70
[    3.113430]  [<ffffffff811a864d>] ? mark_held_locks+0x8d/0x150
[    3.113433]  [<ffffffff81be268d>] ehci_hub_control+0x121d/0x1310
[    3.113435]  [<ffffffff8133f44d>] ? __kmalloc+0x10d/0x330
[    3.113437]  [<ffffffff811a88bc>] ? trace_hardirqs_on_caller+0x1ac/0x2c0
[    3.113440]  [<ffffffff81bb81ae>] ? usb_hcd_submit_urb+0x31e/0xe20
[    3.113441]  [<ffffffff81bb86ae>] usb_hcd_submit_urb+0x81e/0xe20
[    3.113443]  [<ffffffff81bba73e>] usb_submit_urb+0x29e/0x990
[    3.113445]  [<ffffffff81bbb723>] usb_start_wait_urb+0x63/0x1a0
[    3.113447]  [<ffffffff81bbb91c>] usb_control_msg+0xbc/0xf0
[    3.113449]  [<ffffffff81bb2f29>] hub_probe+0x499/0x13c0
[    3.113452]  [<ffffffff821fbee6>] ? __mutex_unlock_slowpath+0xf6/0x210
[    3.113454]  [<ffffffff81bc1f15>] usb_probe_interface+0x165/0x450
[    3.113457]  [<ffffffff81a71093>] driver_probe_device+0x123/0x6f0
[    3.113459]  [<ffffffff81a7188e>] __device_attach_driver+0xde/0x1e0
[    3.113461]  [<ffffffff81a717b0>] ? __driver_attach+0x150/0x150
[    3.113463]  [<ffffffff81a6e0a2>] bus_for_each_drv+0x72/0xd0
[    3.113464]  [<ffffffff81a70de1>] __device_attach+0xc1/0x170
[    3.113466]  [<ffffffff81a719de>] device_initial_probe+0xe/0x10
[    3.113468]  [<ffffffff81a6f8a3>] bus_probe_device+0xd3/0x130
[    3.113470]  [<ffffffff81a6c679>] device_add+0x4d9/0x6c0
[    3.113472]  [<ffffffff81bbe9d9>] usb_set_configuration+0x579/0xc70
[    3.113474]  [<ffffffff81bd0e21>] generic_probe+0x31/0xa0
[    3.113476]  [<ffffffff81bc1d47>] usb_probe_device+0x47/0xb0
[    3.113478]  [<ffffffff81a71093>] driver_probe_device+0x123/0x6f0
[    3.113479]  [<ffffffff81a7188e>] __device_attach_driver+0xde/0x1e0
[    3.113481]  [<ffffffff81a717b0>] ? __driver_attach+0x150/0x150
[    3.113483]  [<ffffffff81a6e0a2>] bus_for_each_drv+0x72/0xd0
[    3.113484]  [<ffffffff81a70de1>] __device_attach+0xc1/0x170
[    3.113486]  [<ffffffff81a719de>] device_initial_probe+0xe/0x10
[    3.113488]  [<ffffffff81a6f8a3>] bus_probe_device+0xd3/0x130
[    3.113489]  [<ffffffff81a6c679>] device_add+0x4d9/0x6c0
[    3.113491]  [<ffffffff81baf293>] usb_new_device+0x2e3/0x830
[    3.113492]  [<ffffffff81bb6aca>] usb_add_hcd+0x6ba/0xb80
[    3.113494]  [<ffffffff81bd4704>] usb_hcd_pci_probe+0x454/0x630
[    3.113496]  [<ffffffff811a89dd>] ? trace_hardirqs_on+0xd/0x10
[    3.113497]  [<ffffffff81bed861>] ehci_pci_probe+0x31/0x40
[    3.113499]  [<ffffffff81774f40>] pci_device_probe+0xb0/0x160
[    3.113501]  [<ffffffff81a71093>] driver_probe_device+0x123/0x6f0
[    3.113503]  [<ffffffff81a71756>] __driver_attach+0xf6/0x150
[    3.113505]  [<ffffffff81a71660>] ? driver_probe_device+0x6f0/0x6f0
[    3.113506]  [<ffffffff81a6dfcb>] bus_for_each_dev+0x6b/0xb0
[    3.113508]  [<ffffffff81a70582>] driver_attach+0x22/0x40
[    3.113510]  [<ffffffff81a6fd1a>] bus_add_driver+0x17a/0x350
[    3.113512]  [<ffffffff83907884>] ? ehci_hcd_init+0xc3/0xc3
[    3.113514]  [<ffffffff81a72838>] driver_register+0x78/0x130
[    3.113517]  [<ffffffff81772b32>] __pci_register_driver+0x72/0xb0
[    3.113518]  [<ffffffff839078e9>] ehci_pci_init+0x65/0x67
[    3.113521]  [<ffffffff810003ef>] do_one_initcall+0xbf/0x250
[    3.113525]  [<ffffffff838af5d4>] kernel_init_freeable+0x24d/0x2e3
[    3.113527]  [<ffffffff821f47ba>] kernel_init+0xa/0x120
[    3.113528]  [<ffffffff821ff3f2>] ret_from_fork+0x22/0x40
[    3.113530]  [<ffffffff821f47b0>] ? rest_init+0x160/0x160
[    3.113530] ================================================================================
[    3.113579] hub 1-0:1.0: 2 ports detected
[    3.115529] ehci-pci 0000:00:1d.0: enabling bus mastering
[    3.115545] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.115565] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.115586] ehci-pci 0000:00:1d.0: debug port 2
[    3.119543] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.119603] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
[    3.141558] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.141883] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.141885] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.141887] usb usb2: Product: EHCI Host Controller
[    3.141889] usb usb2: Manufacturer: Linux 4.6.0-rc4-default-pciehp ehci_hcd
[    3.141891] usb usb2: SerialNumber: 0000:00:1d.0
[    3.143005] hub 2-0:1.0: USB hub found
[    3.143052] hub 2-0:1.0: 2 ports detected
[    3.144271] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.144296] ohci-pci: OHCI PCI platform driver
[    3.144425] uhci_hcd: USB Universal Host Controller Interface driver
[    3.145451] xhci_hcd 0000:0b:00.0: enabling bus mastering
[    3.145469] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[    3.145504] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[    3.145863] xhci_hcd 0000:0b:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x00000000
[    3.145871] xhci_hcd 0000:0b:00.0: enabling Mem-Wr-Inval
[    3.146842] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.146844] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.146845] usb usb3: Product: xHCI Host Controller
[    3.146846] usb usb3: Manufacturer: Linux 4.6.0-rc4-default-pciehp xhci-hcd
[    3.146847] usb usb3: SerialNumber: 0000:0b:00.0
[    3.147733] hub 3-0:1.0: USB hub found
[    3.147794] hub 3-0:1.0: 2 ports detected
[    3.148568] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[    3.148580] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[    3.148694] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.148842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.148844] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.148845] usb usb4: Product: xHCI Host Controller
[    3.148846] usb usb4: Manufacturer: Linux 4.6.0-rc4-default-pciehp xhci-hcd
[    3.148847] usb usb4: SerialNumber: 0000:0b:00.0
[    3.149799] hub 4-0:1.0: USB hub found
[    3.149880] hub 4-0:1.0: 2 ports detected
[    3.150783] usbcore: registered new interface driver cdc_wdm
[    3.150979] usbcore: registered new interface driver usbserial
[    3.151215] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[    3.153708] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.153761] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.154951] mousedev: PS/2 mouse device common for all mice
[    3.156953] rtc_cmos 00:01: RTC can wake from S4
[    3.157438] rtc rtc0: rtc_cmos: dev (252:0)
[    3.157447] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    3.157495] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.157628] i2c /dev entries driver
[    3.160014] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
[    3.160016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.160922] coretemp coretemp.0: TjMax is 100 degrees C
[    3.160997] coretemp coretemp.0: TjMax is 100 degrees C
[    3.161069] coretemp coretemp.0: TjMax is 100 degrees C
[    3.169912] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.170006] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    3.170899] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.170970] iTCO_vendor_support: vendor-support=0
[    3.170980] md: linear personality registered for level -1
[    3.171010] md: raid0 personality registered for level 0
[    3.171021] md: raid1 personality registered for level 1
[    3.171030] md: raid10 personality registered for level 10
[    3.171426] md: raid6 personality registered for level 6
[    3.171427] md: raid5 personality registered for level 5
[    3.171428] md: raid4 personality registered for level 4
[    3.172939] device-mapper: uevent: version 1.0.3
[    3.174028] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx
[    3.175374] Intel P-state driver initializing.
[    3.176587] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    3.375481] hidraw: raw HID events driver (C) Jiri Kosina
[    3.377190] usbcore: registered new interface driver usbhid
[    3.377192] usbhid: USB HID core driver
[    3.386817] NET: Registered protocol family 17
[    3.387186] Bluetooth: RFCOMM TTY layer initialized
[    3.387210] Bluetooth: RFCOMM socket layer initialized
[    3.387245] Bluetooth: RFCOMM ver 1.11
[    3.387308] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.387310] Bluetooth: BNEP filters: protocol multicast
[    3.387332] Bluetooth: BNEP socket layer initialized
[    3.387350] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.387370] Bluetooth: HIDP socket layer initialized
[    3.387615] Key type dns_resolver registered
[    3.393826] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[    3.393884] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[    3.393997] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[    3.394040] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[    3.394705] microcode: Microcode Update Driver: v2.01 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    3.394867] AVX version of gcm_enc/dec engaged.
[    3.394869] AES CTR mode by8 optimization enabled
[    3.404916] registered taskstats version 1
[    3.405005] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD87B1/3: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    3.405010] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.405013] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    3.405015] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    3.405018] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    3.405021] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    3.405025] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[    3.407978] Key type encrypted registered
[    3.413040] rtc_cmos 00:01: setting system clock to 2016-04-21 11:13:22 UTC (1461237202)
[    3.413061] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.413071] EDD information not available.
[    3.414590] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.415389] PM: Checking hibernation image partition /dev/sda6
[    3.426476] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.426708] ata1.00: ATA-8: ST2000LM003 HN-M201RAD, 2BC10001, max UDMA/133
[    3.426712] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.431610] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.438103] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.438262] ata1.00: configured for UDMA/133
[    3.461686] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.461763] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    3.532047] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    3.582723] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    3.582728] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.585767] hub 1-1:1.0: USB hub found
[    3.585969] hub 1-1:1.0: 6 ports detected
[    3.606406] usb 3-2: New USB device found, idVendor=2109, idProduct=2812
[    3.606410] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.606413] usb 3-2: Product: USB2.0 Hub             
[    3.606416] usb 3-2: Manufacturer: VIA Labs, Inc.         
[    3.612447] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.612450] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.614121] hub 2-1:1.0: USB hub found
[    3.614398] hub 2-1:1.0: 8 ports detected
[    3.629769] hub 3-2:1.0: USB hub found
[    3.630287] hub 3-2:1.0: 4 ports detected
[    3.741888] tsc: Refined TSC clocksource calibration: 2793.650 MHz
[    3.741897] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2844d22a1bd, max_idle_ns: 440795205098 ns
[    3.786375] usb 4-2: New USB device found, idVendor=2109, idProduct=0812
[    3.786380] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.786384] usb 4-2: Product: USB3.0 Hub             
[    3.786387] usb 4-2: Manufacturer: VIA Labs, Inc.         
[    3.789861] hub 4-2:1.0: USB hub found
[    3.790297] hub 4-2:1.0: 4 ports detected
[    3.871744] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[    3.891723] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    3.921670] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[    3.990209] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[    3.990214] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.990217] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[    3.990220] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[    4.015813] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[    4.015817] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.015821] usb 2-1.6: Product: USB2.0-CRW
[    4.015824] usb 2-1.6: Manufacturer: Generic
[    4.015826] usb 2-1.6: SerialNumber: 20090516388200000
[    4.037435] usb 3-2.1: New USB device found, idVendor=2109, idProduct=2812
[    4.037439] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.037442] usb 3-2.1: Product: USB2.0 Hub             
[    4.037445] usb 3-2.1: Manufacturer: VIA Labs, Inc.         
[    4.045986] hub 3-2.1:1.0: USB hub found
[    4.046654] hub 3-2.1:1.0: 4 ports detected
[    4.151723] usb 3-2.3: new high-speed USB device number 4 using xhci_hcd
[    4.171888] usb 4-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[    4.200795] Console: switching to colour frame buffer device 170x48
[    4.276873] usb 3-2.3: New USB device found, idVendor=2109, idProduct=2812
[    4.276875] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.276877] usb 3-2.3: Product: USB2.0 Hub             
[    4.276878] usb 3-2.3: Manufacturer: VIA Labs, Inc.         
[    4.303793] hub 3-2.3:1.0: USB hub found
[    4.305395] hub 3-2.3:1.0: 4 ports detected
[    4.418513] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[    4.421620] usb 3-2.4: new high-speed USB device number 5 using xhci_hcd
[    4.425512] usb 4-2.1: New USB device found, idVendor=2109, idProduct=0812
[    4.425516] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.425519] usb 4-2.1: Product: USB3.0 Hub             
[    4.425523] usb 4-2.1: Manufacturer: VIA Labs, Inc.         
[    4.429497] hub 4-2.1:1.0: USB hub found
[    4.429887] hub 4-2.1:1.0: 4 ports detected
[    4.471288] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.473487] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.473933] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.474532] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.487536] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.522067] usb 4-2.3: new SuperSpeed USB device number 4 using xhci_hcd
[    4.537644] usb 3-2.4: New USB device found, idVendor=2109, idProduct=2812
[    4.540001] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.542478] usb 3-2.4: Product: USB2.0 Hub             
[    4.544671] usb 3-2.4: Manufacturer: VIA Labs, Inc.         
[    4.554685] scsi 0:0:0:0: Direct-Access     ATA      ST2000LM003 HN-M 0001 PQ: 0 ANSI: 5
[    4.560250] hub 3-2.4:1.0: USB hub found
[    4.563558] hub 3-2.4:1.0: 4 ports detected
[    4.626297] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.628985] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.637729] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.642645] sd 0:0:0:0: [sda] Write Protect is off
[    4.646712] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.646935] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.723558]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    4.734884] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.742223] clocksource: Switched to clocksource tsc
[    4.787057] usb 4-2.3: New USB device found, idVendor=2109, idProduct=0812
[    4.791585] usb 4-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.796513] usb 4-2.3: Product: USB3.0 Hub             
[    4.800596] usb 4-2.3: Manufacturer: VIA Labs, Inc.         
[    4.814184] hub 4-2.3:1.0: USB hub found
[    4.818275] hub 4-2.3:1.0: 4 ports detected
[    4.901787] usb 3-2.4.3: new low-speed USB device number 6 using xhci_hcd
[    4.902077] usb 4-2.4: new SuperSpeed USB device number 5 using xhci_hcd
[    4.965649] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.973246] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[    4.986121] ata5.00: configured for UDMA/100
[    5.005395] scsi 4:0:0:0: CD-ROM            PLDS     DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[    5.048217] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.051964] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.057700] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    5.058580] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    5.071949] usb 3-2.4.3: New USB device found, idVendor=046d, idProduct=c050
[    5.074818] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.077796] usb 3-2.4.3: Product: USB-PS/2 Optical Mouse
[    5.080782] usb 3-2.4.3: Manufacturer: Logitech
[    5.109111] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.0/0003:046D:C050.0001/input/input12
[    5.116889] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-2.4.3/input0
[    5.157517] usb 4-2.4: New USB device found, idVendor=2109, idProduct=0812
[    5.163173] usb 4-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.168915] usb 4-2.4: Product: USB3.0 Hub             
[    5.174627] usb 4-2.4: Manufacturer: VIA Labs, Inc.         
[    5.198260] hub 4-2.4:1.0: USB hub found
[    5.203260] hub 4-2.4:1.0: 4 ports detected
[    5.251823] usb 3-2.4.4: new low-speed USB device number 7 using xhci_hcd
[    5.385846] ata6: SATA link down (SStatus 0 SControl 300)
[    5.390449] PM: Hibernation image partition 8:6 present
[    5.390459] PM: Looking for hibernation image.
[    5.391843] PM: Image not found (code -22)
[    5.391856] PM: Hibernation image not present or could not be loaded.
[    5.391996] ALSA device list:
[    5.397415]   #0: HDA Intel PCH at 0xf7f00000 irq 36
[    5.404701] md: Waiting for all devices to be available before autodetect
[    5.409556] md: If you don't use raid, use raid=noautodetect
[    5.418889] md: Autodetecting RAID arrays.
[    5.423355] md: Scanned 0 and added 0 devices.
[    5.424443] usb 3-2.4.4: New USB device found, idVendor=04f2, idProduct=0116
[    5.424448] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.424451] usb 3-2.4.4: Product: USB Keyboard
[    5.424454] usb 3-2.4.4: Manufacturer: CHICONY
[    5.444163] md: autorun ...
[    5.447740] md: ... autorun DONE.
[    5.464067] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/0003:04F2:0116.0002/input/input13
[    5.482476] EXT4-fs (sda5): couldn't mount as ext3 due to feature incompatibilities
[    5.523519] hid-generic 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:0b:00.0-2.4.4/input0
[    5.677124] ================================================================================
[    5.678949] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2619:15
[    5.680818] shift exponent 4294967295 is too large for 32-bit type 'int'
[    5.682685] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc4-default-pciehp #1
[    5.682687] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[    5.682689]  ffffffff82dae75e ffff88040d92fa38 ffffffff816d7db5 ffffffff811c54d4
[    5.682693]  ffff88040d92fa68 0000000000000001 ffff88040d92fa50 ffffffff8175ad1d
[    5.682696]  00000000ffffffff ffff88040d92fae0 ffffffff8175b32b ffffffff82dad860
[    5.682699] Call Trace:
[    5.682705]  [<ffffffff816d7db5>] dump_stack+0x68/0xa3
[    5.682709]  [<ffffffff811c54d4>] ? console_unlock+0x284/0x6a0
[    5.682712]  [<ffffffff8175ad1d>] ubsan_epilogue+0xd/0x40
[    5.682715]  [<ffffffff8175b32b>] __ubsan_handle_shift_out_of_bounds+0xeb/0x130
[    5.682718]  [<ffffffff821fbee6>] ? __mutex_unlock_slowpath+0xf6/0x210
[    5.682723]  [<ffffffff814adecf>] ext4_mb_init+0x99f/0xa90
[    5.682725]  [<ffffffff814b2d98>] ? ext4_setup_system_zone+0x198/0x340
[    5.682728]  [<ffffffff81480e22>] ext4_fill_super+0x3142/0x4b40
[    5.682732]  [<ffffffff8135ed8d>] mount_bdev+0x18d/0x1f0
[    5.682734]  [<ffffffff8147dce0>] ? ext4_calculate_overhead+0x890/0x890
[    5.682736]  [<ffffffff8145f520>] ext4_mount+0x10/0x20
[    5.682738]  [<ffffffff8135fbd9>] mount_fs+0x29/0x120
[    5.682742]  [<ffffffff81390146>] vfs_kern_mount+0x66/0x1e0
[    5.682745]  [<ffffffff8138da7b>] ? get_fs_type+0x6b/0xf0
[    5.682747]  [<ffffffff8139476b>] do_mount+0x24b/0x16e0
[    5.682750]  [<ffffffff81343ff0>] ? __kmalloc_track_caller+0x100/0x330
[    5.682752]  [<ffffffff813961a0>] SyS_mount+0x90/0xd0
[    5.682756]  [<ffffffff838afaa7>] mount_block_root+0x1da/0x332
[    5.682758]  [<ffffffff81369f3a>] ? done_path_create+0x4a/0x70
[    5.682761]  [<ffffffff81374ef5>] ? SyS_mknod+0x175/0x2a0
[    5.682763]  [<ffffffff838afd00>] mount_root+0x101/0x10a
[    5.682765]  [<ffffffff838afe43>] prepare_namespace+0x13a/0x172
[    5.682768]  [<ffffffff838af656>] kernel_init_freeable+0x2cf/0x2e3
[    5.682770]  [<ffffffff821f47ba>] kernel_init+0xa/0x120
[    5.682773]  [<ffffffff821ff3f2>] ret_from_fork+0x22/0x40
[    5.682775]  [<ffffffff821f47b0>] ? rest_init+0x160/0x160
[    5.682776] ================================================================================
[    5.707532] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    5.709324] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[    5.745965] devtmpfs: mounted
[    5.752295] Freeing unused kernel memory: 1192K (ffffffff83897000 - ffffffff839c1000)
[    5.756076] Write protecting the kernel read-only data: 26624k
[    5.762006] Freeing unused kernel memory: 2016K (ffff880002208000 - ffff880002400000)
[    5.772670] Freeing unused kernel memory: 1648K (ffff880002864000 - ffff880002a00000)
[    8.088023] random: nonblocking pool is initialized
[   10.666933] systemd-udevd[2272]: starting version 228
[   11.965152] r8169 0000:05:00.0 enp5s0: renamed from eth0
[   12.089685] systemd-udevd[2316]: Process 'net.sh eth0 start' failed with exit code 1.
[   13.680216] Intel(R) Wireless WiFi driver for Linux
[   13.680230] Copyright(c) 2003- 2015 Intel Corporation
[   13.749853] usbcore: registered new interface driver usb-storage
[   13.885224] usbcore: registered new interface driver uas
[   13.986806] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   14.034498] ums-realtek 2-1.6:1.0: USB Mass Storage device detected
[   14.051432] scsi host6: usb-storage 2-1.6:1.0
[   14.052958] usbcore: registered new interface driver ums-realtek
[   14.728717] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820)
[   14.731586] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[   14.732586] usbcore: registered new interface driver uvcvideo
[   14.732590] USB Video Class driver (1.1.1)
[   14.879863] EXT4-fs (sda5): re-mounted. Opts: (null)
[   15.057921] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[   15.061522] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   15.299810] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   15.299820] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   15.299824] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   15.299831] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[   15.300496] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled
[   15.307800] iwlwifi 0000:09:00.0: RF_KILL bit toggled to disable radio.
[   15.322011] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   15.372617] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0
[   15.412786] systemd-udevd[2314]: Process 'net.sh wlan0 start' failed with exit code 1.
[   15.562902] systemd-udevd[2306]: Process '/usr/sbin/crda' failed with exit code 249.
[   15.743700] sd 6:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[   15.744882] sd 6:0:0:0: [sdb] Write Protect is off
[   15.744889] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   15.745999] sd 6:0:0:0: [sdb] No Caching mode page found
[   15.746005] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   15.751931]  sdb: sdb1
[   15.756357] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   16.073230] Adding 16776188k swap on /dev/sda6.  Priority:-1 extents:1 across:16776188k FS
[   16.993970] fuse init (API version 7.24)
[   18.345587] ================================================================================
[   18.345599] UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1281:11
[   18.345604] shift exponent -1 is negative
[   18.345611] CPU: 1 PID: 2804 Comm: mktemp Not tainted 4.6.0-rc4-default-pciehp #1
[   18.345614] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[   18.345618]  ffffffff82dae75e ffff88040ac7b8d8 ffffffff816d7db5 ffffffff811c54d4
[   18.345627]  ffff88040ac7b908 0000000000000001 ffff88040ac7b8f0 ffffffff8175ad1d
[   18.345634]  ffffffffffffffff ffff88040ac7b988 ffffffff8175b32b 0000000000000080
[   18.345641] Call Trace:
[   18.345653]  [<ffffffff816d7db5>] dump_stack+0x68/0xa3
[   18.345662]  [<ffffffff811c54d4>] ? console_unlock+0x284/0x6a0
[   18.345668]  [<ffffffff8175ad1d>] ubsan_epilogue+0xd/0x40
[   18.345674]  [<ffffffff8175b32b>] __ubsan_handle_shift_out_of_bounds+0xeb/0x130
[   18.345681]  [<ffffffff811a9287>] ? __lock_acquire+0x527/0x3450
[   18.345687]  [<ffffffff812a9cc9>] ? find_get_entry+0x119/0x2d0
[   18.345695]  [<ffffffff8149d871>] mb_find_order_for_block+0x101/0x140
[   18.345701]  [<ffffffff8149da22>] mb_find_extent+0xc2/0x480
[   18.345706]  [<ffffffff812a9ce1>] ? find_get_entry+0x131/0x2d0
[   18.345710]  [<ffffffff812a9bb0>] ? filemap_map_pages+0x690/0x690
[   18.345717]  [<ffffffff814a25e6>] ext4_mb_complex_scan_group+0x116/0x540
[   18.345723]  [<ffffffff814abb5f>] ? ext4_mb_regular_allocator+0x21f/0x680
[   18.345729]  [<ffffffff814abbe3>] ext4_mb_regular_allocator+0x2a3/0x680
[   18.345736]  [<ffffffff814af6f5>] ext4_mb_new_blocks+0x465/0xc80
[   18.345741]  [<ffffffff81493bb8>] ? ext4_ext_map_blocks+0x248/0x2200
[   18.345747]  [<ffffffff8149475c>] ext4_ext_map_blocks+0xdec/0x2200
[   18.345755]  [<ffffffff81440e56>] ext4_map_blocks+0x156/0x550
[   18.345760]  [<ffffffff81442445>] ext4_getblk+0x45/0x230
[   18.345766]  [<ffffffff8144263d>] ext4_bread+0xd/0xb0
[   18.345773]  [<ffffffff81451eb4>] ext4_append+0x84/0x1d0
[   18.345778]  [<ffffffff8145bc8f>] ext4_mkdir+0x24f/0x640
[   18.345785]  [<ffffffff8136c663>] vfs_mkdir+0xc3/0x220
[   18.345791]  [<ffffffff813751fa>] SyS_mkdir+0x8a/0x150
[   18.345799]  [<ffffffff821ff1a9>] entry_SYSCALL_64_fastpath+0x1c/0xac
[   18.345803] ================================================================================
[   23.072440] r8169 0000:05:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
[   23.072460] r8169 0000:05:00.0 enp5s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[   23.096834] r8169 0000:05:00.0 enp5s0: link down
[   23.096968] r8169 0000:05:00.0 enp5s0: link down
[   24.748052] r8169 0000:05:00.0 enp5s0: link up
[   34.544353] ================================================================================
[   34.544363] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:9
[   34.544368] signed integer overflow:
[   34.544372] -116387980 + -2105247190 cannot be represented in type 'int'
[   34.544379] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc4-default-pciehp #1
[   34.544384] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
[   34.544388]  ffffffff835dedb4 ffff88041fa037b0 ffffffff816d7db5 0000000000000007
[   34.544398]  ffff88041fa037d8 000000000000002b ffff88041fa037c8 ffffffff8175ad1d
[   34.544406]  ffffffff82847a2a ffff88041fa03850 ffffffff8175b646 0000000000000286
[   34.544415] Call Trace:
[   34.544418]  <IRQ>  [<ffffffff816d7db5>] dump_stack+0x68/0xa3
[   34.544435]  [<ffffffff8175ad1d>] ubsan_epilogue+0xd/0x40
[   34.544441]  [<ffffffff8175b646>] handle_overflow+0xb6/0xe0
[   34.544450]  [<ffffffff81ef9747>] ? __ip_append_data+0x627/0x12b0
[   34.544457]  [<ffffffff8175b67e>] __ubsan_handle_add_overflow+0xe/0x10
[   34.544463]  [<ffffffff81ee627a>] ip_idents_reserve+0x9a/0xd0
[   34.544469]  [<ffffffff81ee6358>] __ip_select_ident+0xa8/0x100
[   34.544475]  [<ffffffff81efe5da>] __ip_make_skb+0x30a/0x9a0
[   34.544482]  [<ffffffff81efed0d>] ip_push_pending_frames+0x1d/0x50
[   34.544490]  [<ffffffff81f54b2a>] icmp_push_reply+0x16a/0x340
[   34.544496]  [<ffffffff81f5632b>] icmp_send+0x68b/0xad0
[   34.544502]  [<ffffffff81f4b62c>] ? __udp4_lib_lookup+0x38c/0x840
[   34.544509]  [<ffffffff81f4d92b>] __udp4_lib_rcv+0x8bb/0xde0
[   34.544515]  [<ffffffff81f4ea95>] udp_rcv+0x15/0x20
[   34.544521]  [<ffffffff81ef20ba>] ip_local_deliver_finish+0xda/0x580
[   34.544527]  [<ffffffff81ef202b>] ? ip_local_deliver_finish+0x4b/0x580
[   34.544533]  [<ffffffff81ef31ae>] ip_local_deliver+0x7e/0x150
[   34.544540]  [<ffffffff81ef26d5>] ip_rcv_finish+0x175/0x8c0
[   34.544545]  [<ffffffff81ef3520>] ip_rcv+0x2a0/0x4b0
[   34.544552]  [<ffffffff81ef3280>] ? ip_local_deliver+0x150/0x150
[   34.544558]  [<ffffffff81e91cff>] __netif_receive_skb_core+0x63f/0x1130
[   34.544564]  [<ffffffff81e9280f>] __netif_receive_skb+0x1f/0xe0
[   34.544570]  [<ffffffff81e95508>] netif_receive_skb_internal+0x68/0x260
[   34.544575]  [<ffffffff81e954b3>] ? netif_receive_skb_internal+0x13/0x260
[   34.544581]  [<ffffffff81e97440>] napi_gro_receive+0x180/0x280
[   34.544588]  [<ffffffff81b7a98e>] rtl8169_poll+0x2ee/0x810
[   34.544594]  [<ffffffff81e965b1>] net_rx_action+0x261/0x5e0
[   34.544601]  [<ffffffff81132763>] ? __do_softirq+0xf3/0x7a0
[   34.544608]  [<ffffffff8113277b>] __do_softirq+0x10b/0x7a0
[   34.544614]  [<ffffffff81133010>] irq_exit+0xd0/0x120
[   34.544620]  [<ffffffff81036e3f>] do_IRQ+0x7f/0x170
[   34.544628]  [<ffffffff821ffb49>] common_interrupt+0x89/0x89
[   34.544631]  <EOI>  [<ffffffff81d6fe37>] ? cpuidle_enter_state+0xc7/0x4c0
[   34.544645]  [<ffffffff81d6fe32>] ? cpuidle_enter_state+0xc2/0x4c0
[   34.544651]  [<ffffffff81d70282>] cpuidle_enter+0x12/0x20
[   34.544657]  [<ffffffff811a0307>] call_cpuidle+0x47/0xa0
[   34.544663]  [<ffffffff81d70254>] ? cpuidle_select+0x24/0x40
[   34.544667]  [<ffffffff811a07d1>] cpu_startup_entry+0x2e1/0x480
[   34.544673]  [<ffffffff821f479d>] rest_init+0x14d/0x160
[   34.544681]  [<ffffffff838af37a>] start_kernel+0x447/0x454
[   34.544687]  [<ffffffff838ae120>] ? early_idt_handler_array+0x120/0x120
[   34.544692]  [<ffffffff838ae309>] x86_64_start_reservations+0x2a/0x2c
[   34.544697]  [<ffffffff838ae4ab>] x86_64_start_kernel+0x1a0/0x1b1
[   34.544701] ================================================================================
[   40.416143] pbs_mom (4243): /proc/4243/oom_adj is deprecated, please use /proc/4243/oom_score_adj instead.
[   42.968226] smpboot: CPU 2 is now offline
[   43.245698] smpboot: CPU 3 is now offline

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux