Hi,
> From: Yoshihiro Shimoda
> Sent: Friday, April 15, 2016 6:59 PM
>
> Hi,
>
> > From: Roger Quadros
> > Sent: Thursday, April 14, 2016 8:32 PM
> >
> > On 14/04/16 14:15, Yoshihiro Shimoda wrote:
> > > Hi,
> > >
> < snip >
> > >>> @@ -865,7 +867,8 @@ int usb_otg_register_hcd(struct usb_hcd *hcd, unsigned int irqnum,
> > >>> * we're ready only if we have shared HCD
> > >>> * or we don't need shared HCD.
> > >>> */
> > >>> - if (otg->shared_hcd.hcd || !otg->primary_hcd.hcd->shared_hcd) {
> > >>> + if (otg->shared_hcd.hcd || (!otg->caps->needs_companion &&
> > >>> + !otg->primary_hcd.hcd->shared_hcd)) {
> > >>> otg->host = hcd_to_bus(hcd);
> > >>> /* FIXME: set bus->otg_port if this is true OTG port with HNP */
> > >>>
> > >>
> > >> These changes look good to me. Thanks.
> > >
> > > Thank you for the comment.
> > > If we change the "needs_companion" place to the otg_config,
> > > do we need to add a flag into the otg, instead of otg->caps?
> >
> > Yes we can add a flag in struct usb_otg.
>
> Thank you for the comment.
>
> I made a fixed patch.
> So, should I send this patch to ML after you sent v7 patches?
> Or, would you apply this patch before you send v7 patches?
Oops, I sent this email without my patch...
---
Subject: [PATCH] usb: otg: add hcd companion support
Since some host controller (e.g. EHCI) needs a companion host controller
(e.g. OHCI), this patch adds such a configuration to use it in the OTG
core.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/generic.txt | 3 +++
drivers/usb/common/usb-otg.c | 17 +++++++++++++----
include/linux/usb/otg.h | 7 ++++++-
3 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index f6866c1..1db1c33 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -27,6 +27,9 @@ Optional properties:
- otg-controller: phandle to otg controller. Host or gadget controllers can
contain this property to link it to a particular OTG
controller.
+ - hcd-needs-companion: must be present if otg controller is dealing with
+ EHCI host controller that needs a companion OHCI host
+ controller.
This is an attribute to a USB controller such as:
diff --git a/drivers/usb/common/usb-otg.c b/drivers/usb/common/usb-otg.c
index 41e762a..83c8c96 100644
--- a/drivers/usb/common/usb-otg.c
+++ b/drivers/usb/common/usb-otg.c
@@ -20,6 +20,7 @@
#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/usb/of.h>
#include <linux/usb/otg.h>
#include <linux/usb/gadget.h>
#include <linux/workqueue.h>
@@ -600,6 +601,10 @@ struct usb_otg *usb_otg_register(struct device *dev,
else
INIT_WORK(&otg->work, usb_otg_work);
+ if (of_find_property(dev->of_node, "hcd-needs-companion", NULL) ||
+ config->hcd_needs_companion) /* needs comanion ? */
+ otg->flags |= OTG_FLAG_HCD_NEEDS_COMPANION;
+
otg->wq = create_singlethread_workqueue("usb_otg");
if (!otg->wq) {
dev_err(dev, "otg: %s: can't create workqueue\n",
@@ -823,13 +828,15 @@ int usb_otg_register_hcd(struct usb_hcd *hcd, unsigned int irqnum,
/* HCD will be started by OTG fsm when needed */
mutex_lock(&otg->fsm.lock);
if (otg->primary_hcd.hcd) {
- /* probably a shared HCD ? */
- if (usb_otg_hcd_is_primary_hcd(hcd)) {
+ /* probably a shared HCD or a companion OHCI HCD ? */
+ if (!(otg->flags & OTG_FLAG_HCD_NEEDS_COMPANION) &&
+ usb_otg_hcd_is_primary_hcd(hcd)) {
dev_err(otg_dev, "otg: primary host already registered\n");
goto err;
}
- if (hcd->shared_hcd == otg->primary_hcd.hcd) {
+ if (otg->flags & OTG_FLAG_HCD_NEEDS_COMPANION ||
+ (hcd->shared_hcd == otg->primary_hcd.hcd)) {
if (otg->shared_hcd.hcd) {
dev_err(otg_dev, "otg: shared host already registered\n");
goto err;
@@ -865,7 +872,9 @@ int usb_otg_register_hcd(struct usb_hcd *hcd, unsigned int irqnum,
* we're ready only if we have shared HCD
* or we don't need shared HCD.
*/
- if (otg->shared_hcd.hcd || !otg->primary_hcd.hcd->shared_hcd) {
+ if (otg->shared_hcd.hcd ||
+ (!(otg->flags & OTG_FLAG_HCD_NEEDS_COMPANION) &&
+ !otg->primary_hcd.hcd->shared_hcd)) {
otg->host = hcd_to_bus(hcd);
/* FIXME: set bus->otg_port if this is true OTG port with HNP */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index b094352..6f4ca77 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -57,7 +57,8 @@ struct otg_hcd {
* @list: list of otg controllers
* @work: otg state machine work
* @wq: otg state machine work queue
- * @flags: to track if host/gadget is running
+ * @flags: to track if host/gadget is running, or to indicate if hcd needs
+ * companion
*/
struct usb_otg {
u8 default_a;
@@ -84,6 +85,7 @@ struct usb_otg {
u32 flags;
#define OTG_FLAG_GADGET_RUNNING (1 << 0)
#define OTG_FLAG_HOST_RUNNING (1 << 1)
+#define OTG_FLAG_HCD_NEEDS_COMPANION (1 << 2)
/* use otg->fsm.lock for serializing access */
/*------------- deprecated interface -----------------------------*/
@@ -125,11 +127,14 @@ struct usb_otg_caps {
* @caps: otg capabilities of the controller
* @ops: otg fsm operations
* @otg_work: optional custom otg state machine work function
+ * @hcd_needs_companion: Indicates if host controller needs a companion
+ * controller
*/
struct usb_otg_config {
struct usb_otg_caps *otg_caps;
struct otg_fsm_ops *fsm_ops;
void (*otg_work)(struct work_struct *work);
+ bool hcd_needs_companion;
};
extern const char *usb_otg_state_string(enum usb_otg_state state);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
