[PATCH 1/2] usb: chipidea: add flag CI_HDRC_DP_ALWAYS_PULLUP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For some platforms, the vbus status doesn't be known by system at
device mode. So, there is no way to trigger pulling dp up. We add
a platform flag CI_HDRC_DP_ALWAYS_PULLUP to cover this situation.
With this flag set, the dp will be pulled up during the driver probe.

Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
Cc: Svetoslav Neykov <svetoslav@xxxxxxxxxxx>
---
 drivers/usb/chipidea/ci.h    | 2 ++
 drivers/usb/chipidea/core.c  | 6 ++++--
 drivers/usb/chipidea/otg.c   | 4 +++-
 include/linux/usb/chipidea.h | 1 +
 4 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index cd41455..f81dd3b 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -199,6 +199,7 @@ struct hw_bank {
  * @in_lpm: if the core in low power mode
  * @wakeup_int: if wakeup interrupt occur
  * @rev: The revision number for controller
+ * @dp_always_pullup: keep dp always pullup at device mode
  */
 struct ci_hdrc {
 	struct device			*dev;
@@ -248,6 +249,7 @@ struct ci_hdrc {
 	bool				in_lpm;
 	bool				wakeup_int;
 	enum ci_revision		rev;
+	bool				dp_always_pullup;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 1ca7b04..6f22c6c 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -897,7 +897,7 @@ static inline void ci_role_destroy(struct ci_hdrc *ci)
 {
 	ci_hdrc_gadget_destroy(ci);
 	ci_hdrc_host_destroy(ci);
-	if (ci->is_otg)
+	if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET])
 		ci_hdrc_otg_destroy(ci);
 }
 
@@ -946,6 +946,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		CI_HDRC_IMX28_WRITE_FIX);
 	ci->supports_runtime_pm = !!(ci->platdata->flags &
 		CI_HDRC_SUPPORTS_RUNTIME_PM);
+	ci->dp_always_pullup = !!(ci->platdata->flags &
+		CI_HDRC_DP_ALWAYS_PULLUP);
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
@@ -1012,7 +1014,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		goto deinit_phy;
 	}
 
-	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
+	if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) {
 		ret = ci_hdrc_otg_init(ci);
 		if (ret) {
 			dev_err(dev, "init otg fails, ret = %d\n", ret);
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 03b6743..58be59e 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -95,8 +95,10 @@ enum ci_role ci_otg_role(struct ci_hdrc *ci)
 
 void ci_handle_vbus_change(struct ci_hdrc *ci)
 {
-	if (!ci->is_otg)
+	if (ci->dp_always_pullup) {
+		usb_gadget_vbus_connect(&ci->gadget);
 		return;
+	}
 
 	if (hw_read_otgsc(ci, OTGSC_BSV))
 		usb_gadget_vbus_connect(&ci->gadget);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 8649930..d21fef9 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -55,6 +55,7 @@ struct ci_hdrc_platform_data {
 #define CI_HDRC_OVERRIDE_AHB_BURST	BIT(9)
 #define CI_HDRC_OVERRIDE_TX_BURST	BIT(10)
 #define CI_HDRC_OVERRIDE_RX_BURST	BIT(11)
+#define CI_HDRC_DP_ALWAYS_PULLUP	BIT(12)
 	enum usb_dr_mode	dr_mode;
 #define CI_HDRC_CONTROLLER_RESET_EVENT		0
 #define CI_HDRC_CONTROLLER_STOPPED_EVENT	1
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux