Check for B0 in a more idiomatic way and make sure to not enable
RTS/CTS hardware flow control in B0 as it may override the control
lines. Also make sure to only enable RTS/DTR if there's a transition
from B0.
Signed-off-by: Grigori Goronzy <greg@xxxxxxxxxxxx>
---
drivers/usb/serial/ch341.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ba654e1..3b9a43d 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -396,10 +396,12 @@ static void ch341_set_termios(struct tty_struct *tty,
if (cflag & CSTOPB)
ctrl |= CH341_LCR_STOP_BITS_2;
- if (baud_rate) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
- spin_unlock_irqrestore(&priv->lock, flags);
+ if ((cflag & CBAUD) != B0) {
+ if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl);
if (r < 0)
priv->baud_rate = tty_termios_baud_rate(old_termios);
@@ -411,7 +413,7 @@ static void ch341_set_termios(struct tty_struct *tty,
ch341_set_handshake(port->serial->dev, priv->line_control);
- if (cflag & CRTSCTS) {
+ if ((cflag & CRTSCTS) && ((cflag & CBAUD) != B0)) {
r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
CH341_REG_RTSCTS | ((uint16_t)CH341_REG_RTSCTS << 8),
0x0101);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
