Re: [RFT PATCH 0/4] usb: dwc2: Fix core reset and force mode delay problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi John,

Am 29.03.2016 um 04:36 schrieb John Youn <johnyoun@xxxxxxxxxxxx>:

> Hi,
> 
> The following patch series addresses the core reset and force mode
> delay problems we have been seeing on dwc2 for some platforms.
> 
> I think I have identified the source of the inconsistencies between
> platforms and this series attempts to address them.
> 
> Basically everything stems from the IDDIG debounce filter delay, which
> is a function of the PHY clock speed and can range from 5-50 ms if
> enabled. This delay must be taken into account on core reset and force
> modes. A full explanation is provided in the patch commit log and code
> comments.
> 
> The first two patches are prerequisites to the force mode fixes,
> including one patch that was sent separately by Przemek Rudy. I have
> resubmitted it with this series for convenience.
> 
> Please help by reviewing and testing on your platforms.
> 
> Patches were tested on:
> * Synopsys HAPS platform IP 3.20a OTG, dr_mode=OTG,HOST,PERIPHERAL
> 
> Regards,
> John
> 
> John Youn (3):
> usb: dwc2: gadget: Only initialize device if in device mode
> usb: dwc2: Add delay to core soft reset
> usb: dwc2: Properly account for the force mode delays
> 
> Przemek Rudy (1):
> usb: dwc2: do not override forced dr_mode in gadget setup
> 
> drivers/usb/dwc2/core.c     | 195 ++++++++++++++++++++++++++++----------------
> drivers/usb/dwc2/core.h     |   2 +-
> drivers/usb/dwc2/gadget.c   |  30 +++++--
> drivers/usb/dwc2/hcd.c      |   6 +-
> drivers/usb/dwc2/hw.h       |   1 +
> drivers/usb/dwc2/platform.c |   9 +-
> 6 files changed, 161 insertions(+), 82 deletions(-)
> 
> -- 
> 2.7.4
> 

after applying your patch series on v4.6-rc1 usb keeps being broken on rk3188.
Besides that I get "dwc2 10180000.usb: dwc2_wait_for_mode: Couldn't set host mode“ repeatedly.

Currently this works for me:
- Revert "usb: dwc2: Fix probe problem on bcm2835“
- Apply "usb: dwc2: Add a 10 ms delay to dwc2_core_reset()"


Best regards
Michael


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux