From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx> qe_udc_reg_init() leaves the USB controller enabled before muram memory initialized. Sometimes the uninitialized muram memory confuses the controller, and it start sending the busy interrupts. Fix this by disabling the controller, it will be enabled later by the gadget driver, at bind time. Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx> Cc: Greg KH <greg@xxxxxxxxx> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/usb/gadget/fsl_qe_udc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff -puN drivers/usb/gadget/fsl_qe_udc.c~usb-fsl_qe_udc-fix-qe-usb-controller-initialization drivers/usb/gadget/fsl_qe_udc.c --- a/drivers/usb/gadget/fsl_qe_udc.c~usb-fsl_qe_udc-fix-qe-usb-controller-initialization +++ a/drivers/usb/gadget/fsl_qe_udc.c @@ -2452,8 +2452,12 @@ static int __devinit qe_udc_reg_init(str struct usb_ctlr __iomem *qe_usbregs; qe_usbregs = udc->usb_regs; - /* Init the usb register */ + /* Spec says that we must enable the USB controller to change mode. */ out_8(&qe_usbregs->usb_usmod, 0x01); + /* Mode changed, now disable it, since muram isn't initialized yet. */ + out_8(&qe_usbregs->usb_usmod, 0x00); + + /* Initialize the rest. */ out_be16(&qe_usbregs->usb_usbmr, 0); out_8(&qe_usbregs->usb_uscom, 0); out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR); _ -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
