Device tree binding for new phy-da8xx-usb driver.
Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
---
v3 changes:
* added cfgchip info and example
* correct usage of "DA8xx"
* correct address after @
* dropped 11 before @ in usb@
.../devicetree/bindings/phy/phy-da8xx-usb.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt
diff --git a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt
new file mode 100644
index 0000000..684c548
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt
@@ -0,0 +1,40 @@
+TI DaVinci DA8xx USB PHY
+
+Required properties:
+ - compatible: must be "ti,da830-usbphy".
+ - #phy-cells: must be 1.
+
+This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG
+controllers on DA8xx SoCs. Consumers of this device should use index 1 for
+the USB 1.1 phy device and index 2 for the USB 2.0 phy device.
+
+It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon"
+to access the CFGCHIP2 register.
+
+Example:
+
+ cfgchip: cfgchip@1417c {
+ compatible = "ti,da830-cfgchip", "syscon";
+ reg = <0x1417c 0x14>;
+ };
+
+ usbphy: usbphy {
+ compatible = "ti,da830-usbphy";
+ #phy-cells = <1>;
+ };
+
+ usb11: usb@225000 {
+ compatible = "ti,da830-ohci";
+ reg = <0x225000 0x1000>;
+ interrupts = <59>;
+ phys = <&usbphy 1>;
+ phy-names = "usbphy";
+ };
+
+ usb20: usb@200000 {
+ compatible = "ti,da830-musb";
+ reg = <0x200000 0x1000>;
+ interrupts = <58>;
+ phys = <&usbphy 2>;
+ phy-names = "usbphy";
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
