Hi, The existing workaround (for STAR#9000525659) of forcing DEVSPD to SUPER_SPEED for HIGH_SPEED ports is causing another side effect which causes erratic interrupts and delayed gadget enumeration of upto 2 seconds. Work around the run/stop issue by detecting if it happened using debug LTSSM state and issuing soft reset to the device controller when changing RUN_STOP from 0 to 1. We apply the workaround only if PRTCAP is DEVICE mode as we don't yet support this workaround in OTG mode. Use USB RESET event as exit condition for workaround. cheers, -roger Roger Quadros (2): usb: dwc3: core: Introduce dwc3_device_reinit() usb: dwc3: gadget: usb: dwc3: run/stop metastability workaround drivers/usb/dwc3/core.c | 142 +++++++++++++++++++++++++------------ drivers/usb/dwc3/core.h | 4 ++ drivers/usb/dwc3/gadget.c | 175 +++++++++++++++++++++++++++++++++++++--------- 3 files changed, 246 insertions(+), 75 deletions(-) -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
