[PATCH 091/123] USB: add new opticon serial driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is for the serial mode of the Opticon barcode scanner.

Cc: Kees Stoop <kees.stoop@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/usb/serial/Kconfig   |    9 +
 drivers/usb/serial/Makefile  |    1 +
 drivers/usb/serial/opticon.c |  358 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 368 insertions(+), 0 deletions(-)
 create mode 100644 drivers/usb/serial/opticon.c

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 70338f4..da30784 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -565,6 +565,15 @@ config USB_SERIAL_OMNINET
 	  To compile this driver as a module, choose M here: the
 	  module will be called omninet.
 
+config USB_SERIAL_OPTICON
+	tristate "USB Opticon Barcode driver (serial mode)"
+	help
+	  Say Y here if you want to use a Opticon USB Barcode device
+	  in serial emulation mode.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called opticon.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 6047f81..9a4f59e 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_USB_SERIAL_MOS7840)		+= mos7840.o
 obj-$(CONFIG_USB_SERIAL_MOTOROLA)		+= moto_modem.o
 obj-$(CONFIG_USB_SERIAL_NAVMAN)			+= navman.o
 obj-$(CONFIG_USB_SERIAL_OMNINET)		+= omninet.o
+obj-$(CONFIG_USB_SERIAL_OPTICON)		+= opticon.o
 obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_OTI6858)		+= oti6858.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
new file mode 100644
index 0000000..cea326f
--- /dev/null
+++ b/drivers/usb/serial/opticon.c
@@ -0,0 +1,358 @@
+/*
+ * Opticon USB barcode to serial driver
+ *
+ * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@xxxxxxx>
+ * Copyright (C) 2008 Novell Inc.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static int debug;
+
+static struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x065a, 0x0009) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* This structure holds all of the individual device information */
+struct opticon_private {
+	struct usb_device *udev;
+	struct usb_serial *serial;
+	struct usb_serial_port *port;
+	unsigned char *bulk_in_buffer;
+	struct urb *bulk_read_urb;
+	int buffer_size;
+	u8 bulk_address;
+	spinlock_t lock;	/* protects the following flags */
+	bool throttled;
+	bool actually_throttled;
+	bool rts;
+};
+
+static void opticon_bulk_callback(struct urb *urb)
+{
+	struct opticon_private *priv = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	struct usb_serial_port *port = priv->port;
+	int status = urb->status;
+	struct tty_struct *tty;
+	int result;
+	int available_room = 0;
+	int data_length;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __func__, status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __func__, status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length,
+			      data);
+
+	if (urb->actual_length > 2) {
+		data_length = urb->actual_length - 2;
+
+		/*
+		 * Data from the device comes with a 2 byte header:
+		 *
+		 * <0x00><0x00>data...
+		 * 	This is real data to be sent to the tty layer
+		 * <0x00><0x01)level
+		 * 	This is a RTS level change, the third byte is the RTS
+		 * 	value (0 for low, 1 for high).
+		 */
+		if ((data[0] == 0x00) && (data[1] == 0x00)) {
+			/* real data, send it to the tty layer */
+			tty = tty_port_tty_get(&port->port);
+			if (tty) {
+				available_room = tty_buffer_request_room(tty,
+								data_length);
+				if (available_room) {
+					tty_insert_flip_string(tty, data,
+							       available_room);
+					tty_flip_buffer_push(tty);
+				}
+				tty_kref_put(tty);
+			}
+		} else {
+			if ((data[0] == 0x00) && (data[1] == 0x01)) {
+				if (data[2] == 0x00)
+					priv->rts = false;
+				else
+					priv->rts = true;
+				/* FIXME change the RTS level */
+			} else {
+			dev_dbg(&priv->udev->dev,
+				"Unknown data packet received from the device:"
+				" %2x %2x\n",
+				data[0], data[1]);
+			}
+		}
+	} else {
+		dev_dbg(&priv->udev->dev,
+			"Improper ammount of data received from the device, "
+			"%d bytes", urb->actual_length);
+	}
+
+exit:
+	spin_lock(&priv->lock);
+
+	/* Continue trying to always read if we should */
+	if (!priv->throttled) {
+		usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
+				  usb_rcvbulkpipe(priv->udev,
+						  priv->bulk_address),
+				  priv->bulk_in_buffer, priv->buffer_size,
+				  opticon_bulk_callback, priv);
+		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		if (result)
+			dev_err(&port->dev,
+			    "%s - failed resubmitting read urb, error %d\n",
+							__func__, result);
+	} else
+		priv->actually_throttled = true;
+	spin_unlock(&priv->lock);
+}
+
+static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
+			struct file *filp)
+{
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+	int result = 0;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->throttled = false;
+	priv->actually_throttled = false;
+	priv->port = port;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/*
+	 * Force low_latency on so that our tty_push actually forces the data
+	 * through, otherwise it is scheduled, and with high data rates (like
+	 * with OHCI) data can get lost.
+	 */
+	if (tty)
+		tty->low_latency = 1;
+
+	/* Start reading from the device */
+	usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
+			  usb_rcvbulkpipe(priv->udev,
+					  priv->bulk_address),
+			  priv->bulk_in_buffer, priv->buffer_size,
+			  opticon_bulk_callback, priv);
+	result = usb_submit_urb(priv->bulk_read_urb, GFP_KERNEL);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
+	return result;
+}
+
+static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
+			  struct file *filp)
+{
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* shutdown our urbs */
+	usb_kill_urb(priv->bulk_read_urb);
+}
+
+static void opticon_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+
+	dbg("%s - port %d", __func__, port->number);
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->throttled = true;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+
+static void opticon_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct opticon_private *priv = usb_get_serial_data(port->serial);
+	unsigned long flags;
+	int result;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->throttled = false;
+	priv->actually_throttled = false;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	priv->bulk_read_urb->dev = port->serial->dev;
+	result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
+}
+
+static int opticon_startup(struct usb_serial *serial)
+{
+	struct opticon_private *priv;
+	struct usb_host_interface *intf;
+	int i;
+	int retval = -ENOMEM;
+	bool bulk_in_found = false;
+
+	/* create our private serial structure */
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (priv == NULL) {
+		dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+		return -ENOMEM;
+	}
+	spin_lock_init(&priv->lock);
+	priv->serial = serial;
+	priv->port = serial->port[0];
+	priv->udev = serial->dev;
+
+	/* find our bulk endpoint */
+	intf = serial->interface->altsetting;
+	for (i = 0; i < intf->desc.bNumEndpoints; ++i) {
+		struct usb_endpoint_descriptor *endpoint;
+
+		endpoint = &intf->endpoint[i].desc;
+		if (!usb_endpoint_is_bulk_in(endpoint))
+			continue;
+
+		priv->bulk_read_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!priv->bulk_read_urb) {
+			dev_err(&priv->udev->dev, "out of memory\n");
+			goto error;
+		}
+
+		priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
+		priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
+		if (!priv->bulk_in_buffer) {
+			dev_err(&priv->udev->dev, "out of memory\n");
+			goto error;
+		}
+
+		priv->bulk_address = endpoint->bEndpointAddress;
+
+		/* set up our bulk urb */
+		usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
+				  usb_rcvbulkpipe(priv->udev,
+						  endpoint->bEndpointAddress),
+				  priv->bulk_in_buffer, priv->buffer_size,
+				  opticon_bulk_callback, priv);
+
+		bulk_in_found = true;
+		break;
+		}
+
+	if (!bulk_in_found) {
+		dev_err(&priv->udev->dev,
+			"Error - the proper endpoints were not found!\n");
+		goto error;
+	}
+
+	usb_set_serial_data(serial, priv);
+	return 0;
+
+error:
+	usb_free_urb(priv->bulk_read_urb);
+	kfree(priv->bulk_in_buffer);
+	kfree(priv);
+	return retval;
+}
+
+static void opticon_shutdown(struct usb_serial *serial)
+{
+	struct opticon_private *priv = usb_get_serial_data(serial);
+
+	dbg("%s", __func__);
+
+	usb_kill_urb(priv->bulk_read_urb);
+	usb_free_urb(priv->bulk_read_urb);
+	kfree(priv->bulk_in_buffer);
+	kfree(priv);
+	usb_set_serial_data(serial, NULL);
+}
+
+
+static struct usb_driver opticon_driver = {
+	.name =		"opticon",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id = 	1,
+};
+
+static struct usb_serial_driver opticon_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"opticon",
+	},
+	.id_table =		id_table,
+	.usb_driver = 		&opticon_driver,
+	.num_ports =		1,
+	.attach =		opticon_startup,
+	.open =			opticon_open,
+	.close =		opticon_close,
+	.shutdown =		opticon_shutdown,
+	.throttle = 		opticon_throttle,
+	.unthrottle =		opticon_unthrottle,
+};
+
+static int __init opticon_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&opticon_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&opticon_driver);
+	if (retval)
+		usb_serial_deregister(&opticon_device);
+	return retval;
+}
+
+static void __exit opticon_exit(void)
+{
+	usb_deregister(&opticon_driver);
+	usb_serial_deregister(&opticon_device);
+}
+
+module_init(opticon_init);
+module_exit(opticon_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux