From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
This patch (as1197) fixes an error introduced recently. Since a
significant number of devices can't handle Set-Interface requests, we
no longer call usb_set_interface() when a driver unbinds from an
interface, provided the interface is already in altsetting 0. However
the interface still does get disabled, and the call to
usb_set_interface() was the only thing re-enabling it. Since the
interface doesn't get re-enabled, further attempts to use it fail.
So the patch adds a call to usb_enable_interface() when a driver
unbinds and the interface is in altsetting 0. For this to work
right, the interface's endpoints have to be re-enabled but their
toggles have to be left alone. Therefore an additional argument is
added to usb_enable_endpoint() and usb_enable_interface(), a flag
indicating whether or not the endpoint toggles should be reset.
This is a forward-ported version of a patch which fixes Bugzilla
#12301.
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Reported-by: David Roka <roka@xxxxxxxx>
Reported-by: Erik Ekman <erik@xxxxxxx>
Tested-by: Erik Ekman <erik@xxxxxxx>
Tested-by: Alon Bar-Lev <alon.barlev@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/core/driver.c | 9 ++++++---
drivers/usb/core/hub.c | 2 +-
drivers/usb/core/message.c | 25 +++++++++++++++----------
drivers/usb/core/usb.c | 2 +-
drivers/usb/core/usb.h | 4 +++-
5 files changed, 26 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 41c0602..9876055 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -295,9 +295,12 @@ static int usb_unbind_interface(struct device *dev)
* altsetting means creating new endpoint device entries).
* When either of these happens, defer the Set-Interface.
*/
- if (intf->cur_altsetting->desc.bAlternateSetting == 0)
- ; /* Already in altsetting 0 so skip Set-Interface */
- else if (!error && intf->dev.power.status == DPM_ON)
+ if (intf->cur_altsetting->desc.bAlternateSetting == 0) {
+ /* Already in altsetting 0 so skip Set-Interface.
+ * Just re-enable it without affecting the endpoint toggles.
+ */
+ usb_enable_interface(udev, intf, false);
+ } else if (!error && intf->dev.power.status == DPM_ON)
usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
else
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 756b8d9..d5d0e40 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2384,7 +2384,7 @@ void usb_ep0_reinit(struct usb_device *udev)
{
usb_disable_endpoint(udev, 0 + USB_DIR_IN);
usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
- usb_enable_endpoint(udev, &udev->ep0);
+ usb_enable_endpoint(udev, &udev->ep0, true);
}
EXPORT_SYMBOL_GPL(usb_ep0_reinit);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 5589686..de51667 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1143,22 +1143,26 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
* usb_enable_endpoint - Enable an endpoint for USB communications
* @dev: the device whose interface is being enabled
* @ep: the endpoint
+ * @reset_toggle: flag to set the endpoint's toggle back to 0
*
- * Resets the endpoint toggle, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
* For control endpoints, both the input and output sides are handled.
*/
-void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
+void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
+ bool reset_toggle)
{
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
int is_control = usb_endpoint_xfer_control(&ep->desc);
if (is_out || is_control) {
- usb_settoggle(dev, epnum, 1, 0);
+ if (reset_toggle)
+ usb_settoggle(dev, epnum, 1, 0);
dev->ep_out[epnum] = ep;
}
if (!is_out || is_control) {
- usb_settoggle(dev, epnum, 0, 0);
+ if (reset_toggle)
+ usb_settoggle(dev, epnum, 0, 0);
dev->ep_in[epnum] = ep;
}
ep->enabled = 1;
@@ -1168,17 +1172,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
* usb_enable_interface - Enable all the endpoints for an interface
* @dev: the device whose interface is being enabled
* @intf: pointer to the interface descriptor
+ * @reset_toggles: flag to set the endpoints' toggles back to 0
*
* Enables all the endpoints for the interface's current altsetting.
*/
-static void usb_enable_interface(struct usb_device *dev,
- struct usb_interface *intf)
+void usb_enable_interface(struct usb_device *dev,
+ struct usb_interface *intf, bool reset_toggles)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i)
- usb_enable_endpoint(dev, &alt->endpoint[i]);
+ usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
}
/**
@@ -1303,7 +1308,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
* during the SETUP stage - hence EP0 toggles are "don't care" here.
* (Likewise, EP0 never "halts" on well designed devices.)
*/
- usb_enable_interface(dev, iface);
+ usb_enable_interface(dev, iface, true);
if (device_is_registered(&iface->dev)) {
usb_create_sysfs_intf_files(iface);
create_intf_ep_devs(iface);
@@ -1382,7 +1387,7 @@ int usb_reset_configuration(struct usb_device *dev)
usb_remove_sysfs_intf_files(intf);
}
intf->cur_altsetting = alt;
- usb_enable_interface(dev, intf);
+ usb_enable_interface(dev, intf, true);
if (device_is_registered(&intf->dev)) {
usb_create_sysfs_intf_files(intf);
create_intf_ep_devs(intf);
@@ -1685,7 +1690,7 @@ free_interfaces:
alt = &intf->altsetting[0];
intf->cur_altsetting = alt;
- usb_enable_interface(dev, intf);
+ usb_enable_interface(dev, intf, true);
intf->dev.parent = &dev->dev;
intf->dev.driver = NULL;
intf->dev.bus = &usb_bus_type;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index c082156..dcfc072 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
- usb_enable_endpoint(dev, &dev->ep0);
+ usb_enable_endpoint(dev, &dev->ep0, true);
dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 381eae9..3861778 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -12,7 +12,9 @@ extern int usb_create_ep_devs(struct device *parent,
extern void usb_remove_ep_devs(struct usb_host_endpoint *endpoint);
extern void usb_enable_endpoint(struct usb_device *dev,
- struct usb_host_endpoint *ep);
+ struct usb_host_endpoint *ep, bool reset_toggle);
+extern void usb_enable_interface(struct usb_device *dev,
+ struct usb_interface *intf, bool reset_toggles);
extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr);
extern void usb_disable_interface(struct usb_device *dev,
struct usb_interface *intf);
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
