[PATCH 073/123] USB: make printk messages more searchable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wu Fengguang <fengguang.wu@xxxxxxxxx>

USB: make printk messages more searchable

Make USB printk messages long and straightforward.  One of these
decorated USB error messages cost me non-trivial efforts to locate.

Signed-off-by: Wu Fengguang <fengguang.wu@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/usb/core/hub.c |   45 ++++++++++++++++++++++++---------------------
 1 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index fc99ef6..5abdc11 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -107,7 +107,9 @@ MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
 /* define initial 64-byte descriptor request timeout in milliseconds */
 static int initial_descriptor_timeout = USB_CTRL_GET_TIMEOUT;
 module_param(initial_descriptor_timeout, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(initial_descriptor_timeout, "initial 64-byte descriptor request timeout in milliseconds (default 5000 - 5.0 seconds)");
+MODULE_PARM_DESC(initial_descriptor_timeout,
+		"initial 64-byte descriptor request timeout in milliseconds "
+		"(default 5000 - 5.0 seconds)");
 
 /*
  * As of 2.6.10 we introduce a new USB device initialization scheme which
@@ -1136,8 +1138,8 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	hdev = interface_to_usbdev(intf);
 
 	if (hdev->level == MAX_TOPO_LEVEL) {
-		dev_err(&intf->dev, "Unsupported bus topology: "
-				"hub nested too deep\n");
+		dev_err(&intf->dev,
+			"Unsupported bus topology: hub nested too deep\n");
 		return -E2BIG;
 	}
 
@@ -1477,8 +1479,8 @@ static void announce_device(struct usb_device *udev)
 	dev_info(&udev->dev, "New USB device found, idVendor=%04x, idProduct=%04x\n",
 		le16_to_cpu(udev->descriptor.idVendor),
 		le16_to_cpu(udev->descriptor.idProduct));
-	dev_info(&udev->dev, "New USB device strings: Mfr=%d, Product=%d, "
-		"SerialNumber=%d\n",
+	dev_info(&udev->dev,
+		"New USB device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
 		udev->descriptor.iManufacturer,
 		udev->descriptor.iProduct,
 		udev->descriptor.iSerialNumber);
@@ -1543,7 +1545,7 @@ static int usb_configure_device_otg(struct usb_device *udev)
 					 * customize to match your product.
 					 */
 					dev_info(&udev->dev,
-						"can't set HNP mode; %d\n",
+						"can't set HNP mode: %d\n",
 						err);
 					bus->b_hnp_enable = 0;
 				}
@@ -2047,8 +2049,8 @@ static int finish_port_resume(struct usb_device *udev)
 	u16	devstatus;
 
 	/* caller owns the udev device lock */
-	dev_dbg(&udev->dev, "finish %sresume\n",
-			udev->reset_resume ? "reset-" : "");
+	dev_dbg(&udev->dev, "%s\n",
+		udev->reset_resume ? "finish reset-resume" : "finish resume");
 
 	/* usb ch9 identifies four variants of SUSPENDED, based on what
 	 * state the device resumes to.  Linux currently won't see the
@@ -2100,8 +2102,9 @@ static int finish_port_resume(struct usb_device *udev)
 					NULL, 0,
 					USB_CTRL_SET_TIMEOUT);
 			if (status)
-				dev_dbg(&udev->dev, "disable remote "
-					"wakeup, status %d\n", status);
+				dev_dbg(&udev->dev,
+					"disable remote wakeup, status %d\n",
+					status);
 		}
 		status = 0;
 	}
@@ -2584,9 +2587,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 				goto fail;
 			}
 			if (r) {
-				dev_err(&udev->dev, "device descriptor "
-						"read/%s, error %d\n",
-						"64", r);
+				dev_err(&udev->dev,
+					"device descriptor read/64, error %d\n",
+					r);
 				retval = -EMSGSIZE;
 				continue;
 			}
@@ -2623,9 +2626,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 
 		retval = usb_get_device_descriptor(udev, 8);
 		if (retval < 8) {
-			dev_err(&udev->dev, "device descriptor "
-					"read/%s, error %d\n",
-					"8", retval);
+			dev_err(&udev->dev,
+					"device descriptor read/8, error %d\n",
+					retval);
 			if (retval >= 0)
 				retval = -EMSGSIZE;
 		} else {
@@ -2652,8 +2655,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
   
 	retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
 	if (retval < (signed)sizeof(udev->descriptor)) {
-		dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
-			"all", retval);
+		dev_err(&udev->dev, "device descriptor read/all, error %d\n",
+			retval);
 		if (retval >= 0)
 			retval = -ENOMSG;
 		goto fail;
@@ -2721,9 +2724,9 @@ hub_power_remaining (struct usb_hub *hub)
 		else
 			delta = 8;
 		if (delta > hub->mA_per_port)
-			dev_warn(&udev->dev, "%dmA is over %umA budget "
-					"for port %d!\n",
-					delta, hub->mA_per_port, port1);
+			dev_warn(&udev->dev,
+				 "%dmA is over %umA budget for port %d!\n",
+				 delta, hub->mA_per_port, port1);
 		remaining -= delta;
 	}
 	if (remaining < 0) {
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux