From: Bryan Wu <cooloney@xxxxxxxxxx> Signed-off-by: Bryan Wu <cooloney@xxxxxxxxxx> Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx> --- drivers/usb/gadget/Kconfig | 4 ++-- drivers/usb/musb/Kconfig | 12 ++++++++++-- drivers/usb/musb/Makefile | 8 ++++++++ 3 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index cf3a662..c322024 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -297,13 +297,13 @@ config USB_S3C2410_DEBUG # musb builds in ../musb along with host support config USB_GADGET_MUSB_HDRC - boolean "Inventra HDRC USB Peripheral (TI, ...)" + boolean "Inventra HDRC USB Peripheral (TI, ADI, ...)" depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG) select USB_GADGET_DUALSPEED select USB_GADGET_SELECTED help This OTG-capable silicon IP is used in dual designs including - the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010. + the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin config USB_GADGET_M66592 boolean "Renesas M66592 USB Peripheral Controller" diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 4b9542b..5af7379 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,7 +11,7 @@ config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP - tristate 'Inventra Highspeed Dual Role Controller (TI, ...)' + tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then @@ -22,6 +22,9 @@ config USB_MUSB_HDRC Texas Instruments parts using this IP include DaVinci 644x, OMAP 243x, OMAP 343x, and TUSB 6010. + Analog Devices parts using this IP include Blackfin BF54x, + BF525 and BF527. + If you do not know what this is, please say N. To compile this driver as a module, choose M here; the @@ -33,6 +36,8 @@ config USB_MUSB_SOC default y if ARCH_DAVINCI default y if ARCH_OMAP2430 default y if ARCH_OMAP34XX + default y if (BF54x && !BF544) + default y if (BF52x && !BF522 && !BF523) comment "DaVinci 644x USB support" depends on USB_MUSB_HDRC && ARCH_DAVINCI @@ -43,6 +48,9 @@ comment "OMAP 243x high speed USB support" comment "OMAP 343x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP34XX +comment "Blackfin high speed USB Support" + depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523) + config USB_TUSB6010 boolean "TUSB 6010 support" depends on USB_MUSB_HDRC && !USB_MUSB_SOC @@ -142,7 +150,7 @@ config MUSB_PIO_ONLY config USB_INVENTRA_DMA bool depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY - default ARCH_OMAP2430 || ARCH_OMAP34XX + default ARCH_OMAP2430 || ARCH_OMAP34XX || BLACKFIN help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile index b6af0d6..85710cc 100644 --- a/drivers/usb/musb/Makefile +++ b/drivers/usb/musb/Makefile @@ -22,6 +22,14 @@ ifeq ($(CONFIG_ARCH_OMAP3430),y) musb_hdrc-objs += omap2430.o endif +ifeq ($(CONFIG_BF54x),y) + musb_hdrc-objs += blackfin.o +endif + +ifeq ($(CONFIG_BF52x),y) + musb_hdrc-objs += blackfin.o +endif + ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y) musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o endif -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
