From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
this driver can't handle (of course) any brdige class devices. So we
now are just active on one specific bridge which should be only the
isp1761 chip behind a PLX bridge.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Tested-by: Karl Bongers <kblists08@xxxxxxxxx>
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/host/isp1760-if.c | 16 ++++++++++------
1 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index b87ca7c..a53114c 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -268,12 +268,16 @@ static void isp1761_pci_shutdown(struct pci_dev *dev)
printk(KERN_ERR "ips1761_pci_shutdown\n");
}
-static const struct pci_device_id isp1760_plx [] = { {
- /* handle any USB 2.0 EHCI controller */
- PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_OTHER << 8) | (0x06 << 16)), ~0),
- .driver_data = 0,
-},
-{ /* end: all zeroes */ }
+static const struct pci_device_id isp1760_plx [] = {
+ {
+ .class = PCI_CLASS_BRIDGE_OTHER << 8,
+ .class_mask = ~0,
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = 0x5406,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = 0x9054,
+ },
+ { }
};
MODULE_DEVICE_TABLE(pci, isp1760_plx);
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
