Direct access to clock control registers can be safely removed, the
task of clock management is done by platform clock driver based on
common clock framework.
Signed-off-by: Vladimir Zapolskiy <vz@xxxxxxxxx>
---
drivers/usb/host/ohci-nxp.c | 18 ------------------
1 file changed, 18 deletions(-)
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index ebacf97..87588fc 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -34,16 +34,6 @@
#include <mach/hardware.h>
#define USB_CONFIG_BASE 0x31020000
-#define PWRMAN_BASE 0x40004000
-
-#define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64)
-
-/* USB_CTRL bit defines */
-#define USB_SLAVE_HCLK_EN (1 << 24)
-#define USB_DEV_NEED_CLK_EN (1 << 22)
-#define USB_HOST_NEED_CLK_EN (1 << 21)
-#define PAD_CONTROL_LAST_DRIVEN (1 << 19)
-
#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110)
/* USB_OTG_STAT_CONTROL bit defines */
@@ -110,9 +100,6 @@ static void isp1301_configure_lpc32xx(void)
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
- /* Enable usb_need_clk clock after transceiver is initialized */
- __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
-
printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
@@ -185,9 +172,6 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
goto fail_disable;
}
- /* Enable AHB slave USB clock, needed for further USB clock control */
- __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL);
-
/* Enable USB PLL */
usb_pll_clk = devm_clk_get(&pdev->dev, "ck_pll5");
if (IS_ERR(usb_pll_clk)) {
@@ -230,8 +214,6 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
goto fail_otg;
}
- __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
-
ret = clk_prepare_enable(usb_otg_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
