It is possible for the VBUS detect GPIO interrupt to occur before
nop_set_peripheral() is called, in which case otg->gadget is NULL.
Signed-off-by: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
---
drivers/usb/phy/phy-generic.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 5320cb8..980c9de 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -118,7 +118,8 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
status = USB_EVENT_VBUS;
otg->state = OTG_STATE_B_PERIPHERAL;
nop->phy.last_event = status;
- usb_gadget_vbus_connect(otg->gadget);
+ if (otg->gadget)
+ usb_gadget_vbus_connect(otg->gadget);
/* drawing a "unit load" is *always* OK, except for OTG */
nop_set_vbus_draw(nop, 100);
@@ -128,7 +129,8 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
} else {
nop_set_vbus_draw(nop, 0);
- usb_gadget_vbus_disconnect(otg->gadget);
+ if (otg->gadget)
+ usb_gadget_vbus_disconnect(otg->gadget);
status = USB_EVENT_NONE;
otg->state = OTG_STATE_B_IDLE;
nop->phy.last_event = status;
@@ -184,7 +186,10 @@ static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
}
otg->gadget = gadget;
- otg->state = OTG_STATE_B_IDLE;
+ if (otg->state == OTG_STATE_B_PERIPHERAL)
+ usb_gadget_vbus_connect(gadget);
+ else
+ otg->state = OTG_STATE_B_IDLE;
return 0;
}
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
