[PATCH 1/5 v7] dt/bindings: Add binding for the DA8xx MUSB driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver.

Signed-off-by: Petr Kulhavy <petr@xxxxxxxxx>
---
v1: <initial>

v2:
 - using standard properties "dr_mode", "mentor,power", "mentor,num-eps", "mentor,multipoint", "mentor,ram-bits"
 - using "ti," prefix instead of "da8xx," for specific property names
 - no wildcards in compatibility string

v3:
 - added "reg", "interrupts" and "interrupt-names" properties
 - wildcards in compatibility string

v4:
 - compatibility string set to "ti,da830-musb"
 - "mentor,num-eps", "mentor,multipoint", "mentor,ram-bits" properties removed and hardcoded
 - "ti,phy20-clkmux-cfg" renamed to "ti,phy20-clkmux-pll" and changed to boolean
 - removed "ti,hwmods"

v5:
 - "ti,phy20-refclock-frequency" property made mandatory

v6:
 - using "ti,usb2-phy-" prefix instead of "ti,phy20-" for the specific properties

v7:
 - removed the "mentor,power" property; hard coded to 500mA in the code

 .../devicetree/bindings/usb/da8xx-usb.txt          | 43 ++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/da8xx-usb.txt

diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
new file mode 100644
index 0000000..e281829
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -0,0 +1,43 @@
+TI DA8xx MUSB
+~~~~~~~~~~~~~
+For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+ - compatible : Should be set to "ti,da830-musb".
+
+ - reg: Offset and length of the USB controller register set.
+
+ - interrupts: The USB interrupt number.
+
+ - interrupt-names: Should be set to "mc".
+
+ - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
+
+ - ti,usb2-phy-refclock-frequency : Integer. Defines the USB 2.0 PHY reference clock input
+     frequency in Hz in case the clock is generated by the internal PLL.
+     Supported values are 12MHz, 13MHz, 19.2MHz, 20MHz, 24MHz, 26MHz, 38.4MHz, 40MHz, 48MHz
+
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+ - ti,usb2-phy-clkmux-pll: Boolean. Defines the USB 2.0 PHY reference clock source.
+     If present the internal PLL is used as a clock source, otherwise the external
+     USB_REFCLKIN pin is used.
+
+Example:
+
+	usb20: usb@1e00000 {
+		compatible = "ti,da830-musb";
+		reg =   <0x00200000 0x10000>;
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+		interrupt-names = "mc";
+
+		dr_mode = "host";
+
+		ti,usb2-phy-clkmux-pll;
+		ti,usb2-phy-refclock-frequency = <24000000>;
+
+		status = "okay";
+	};
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux