Update various places where the speed is checked so that it takes into
account SuperSpeedPlus properly.
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
drivers/usb/dwc3/ep0.c | 9 ++++++---
drivers/usb/dwc3/gadget.c | 13 ++++++++-----
2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 3a9354a..0f1497c 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -356,7 +356,8 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
*/
usb_status |= dwc->gadget.is_selfpowered;
- if (dwc->speed == DWC3_DSTS_SUPERSPEED) {
+ if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
+ (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (reg & DWC3_DCTL_INITU1ENA)
usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
@@ -426,7 +427,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
case USB_DEVICE_U1_ENABLE:
if (state != USB_STATE_CONFIGURED)
return -EINVAL;
- if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+ if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+ (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -440,7 +442,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
case USB_DEVICE_U2_ENABLE:
if (state != USB_STATE_CONFIGURED)
return -EINVAL;
- if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+ if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+ (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7d1dd82..73db723 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -421,7 +421,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
/* Burst size is only needed in SuperSpeed mode */
- if (dwc->gadget.speed == USB_SPEED_SUPER) {
+ if (dwc->gadget.speed >= USB_SPEED_SUPER) {
u32 burst = dep->endpoint.maxburst - 1;
params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
@@ -1403,7 +1403,8 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
- if (speed == DWC3_DSTS_SUPERSPEED) {
+ if ((speed == DWC3_DSTS_SUPERSPEED) ||
+ (speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
ret = -EINVAL;
goto out;
@@ -2306,7 +2307,8 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
* this. Maybe it becomes part of the power saving plan.
*/
- if (speed != DWC3_DSTS_SUPERSPEED)
+ if ((speed != DWC3_DSTS_SUPERSPEED) &&
+ (speed != DWC3_DSTS_SUPERSPEED_PLUS))
return;
/*
@@ -2376,8 +2378,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
/* Enable USB2 LPM Capability */
- if ((dwc->revision > DWC3_REVISION_194A)
- && (speed != DWC3_DCFG_SUPERSPEED)) {
+ if ((dwc->revision > DWC3_REVISION_194A) &&
+ (speed != DWC3_DCFG_SUPERSPEED) &&
+ (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg |= DWC3_DCFG_LPM_CAP;
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
