[PATCH 10/13] uas: correctly label reset functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A reset based on usb_reset_device() will reset the whole
host, not just a bus. We should use the correct entry.

Signed-off-by: Oliver Neukum <oneukum@xxxxxxxx>
---
 drivers/usb/storage/uas.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 31ff1a0..f1eaa93 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -57,7 +57,9 @@ struct uas_dev_info {
 	spinlock_t lock;
 	struct work_struct work;
 	struct completion deathknell;
-	bool aborted;
+	bool aborted; /* a reply to a TASK ABORT was seen */
+	bool tmf_catastrophic; /* TMF failed, retry useless */
+	bool tmf_error; /* tmf may be retried after error handling */
 };
 
 enum {
@@ -492,6 +494,20 @@ static void uas_tmf_cmplt(struct urb *urb)
 	if (status < 0) {
 		devinfo->deathrow = NULL;
 		complete(&devinfo->deathknell);
+		switch (status) {
+		case -ESHUTDOWN:
+		case -ENODEV:
+			devinfo->tmf_catastrophic = true;
+			break;
+		case -EPIPE:
+		/* small packages, hence no partial transmission */
+		case -EILSEQ:
+		case -EPROTO:
+			devinfo->tmf_error = true;
+			break;
+		default:
+			break;
+		}
 	}
 
 	/*
@@ -794,6 +810,7 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 	struct urb *data_out_urb = NULL;
 	unsigned long flags;
 	int err, time;
+	int success = FAILED;
 
 	spin_lock_irqsave(&devinfo->lock, flags);
 
@@ -804,6 +821,8 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 
 	init_completion(&devinfo->deathknell);
 	devinfo->deathrow = cmnd;
+	devinfo->tmf_catastrophic = false;
+	devinfo->tmf_error = false;
 	usb_fill_bulk_urb(devinfo->management_urb,
 			  devinfo->udev,
 			  devinfo->cmd_pipe, /* shared */
@@ -819,6 +838,12 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 	err = usb_submit_urb(devinfo->management_urb, GFP_NOIO);
 	if (err < 0) /* unkillable */
 		goto give_up;
+	else
+		/*
+		 * SCSI has the convention that a potential
+		 * ABORT is to be reported as SUCCESS
+		 */
+		success = SUCCESS;
 
 	time = wait_for_completion_timeout(&devinfo->deathknell, USB_CTRL_GET_TIMEOUT);
 	/* in case of timeout */
@@ -831,6 +856,10 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 		cmnd->result = DID_ABORT << 16;
 		cmnd->scsi_done(cmnd);
 	}
+	if (devinfo->tmf_catastrophic)
+		success = FAST_IO_FAIL;
+	else if (devinfo->tmf_error)
+		success = FAILED;
 
 give_up:
 
@@ -854,7 +883,7 @@ give_up:
 		usb_put_urb(data_out_urb);
 	}
 
-	return FAILED;
+	return success;
 }
 
 static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux