Re: [PATCH] usb: retry reset if a device times out

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2016-02-04 at 14:53 +0800, Peter Chen wrote:
> On Wed, Feb 03, 2016 at 11:24:57AM -0500, Alan Stern wrote:
> > On Wed, 3 Feb 2016, Oliver Neukum wrote:
> > 
> > > Some devices I got show an inability to operate right after
> > > power on if they are already connected. They are beyond recovery
> > > if the descriptors are requested multiple times. So in case of
> > > a timeout we rather bail early and reset again.
> > > 
> > > This patch is a rework of a patch that fell through the cracks.
> > > http://www.spinics.net/lists/linux-usb/msg103263.html
> > > 
> > > Signed-off-by: Oliver Neukum <oneukum@xxxxxxxx>
> > > CC: stable@xxxxxxxxxxxxxxx
> > > ---
> > >  drivers/usb/core/hub.c | 7 ++++++-
> > >  1 file changed, 6 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > > index f912fe6..2124c4e 100644
> > > --- a/drivers/usb/core/hub.c
> > > +++ b/drivers/usb/core/hub.c
> > > @@ -4496,7 +4496,12 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
> > >  						r = -EPROTO;
> > >  					break;
> > >  				}
> > > -				if (r == 0)
> > > +				/*
> > > +				 * Some devices time out if they are powered on
> > > +				 * when already connected. They need a second
> > > +				 * reset.
> > > +				 */
> > > +				if (r == 0  || r == -ETIMEDOUT)
> > >  					break;
> > >  			}
> > >  			udev->descriptor.bMaxPacketSize0 =
> > > 
> > 
> > Hmmm.  Your device fails completely if there are multiple attempts 
> > without a reset in between, right?
> > 
> > What about devices which always time out the first control request
> > after a reset?  I can't be certain any such devices exist, but it
> > wouldn't be surprising given the range of hardware bugs in USB devices.
> > 
> > Would it be safer to do this instead?
> > 
> > 				if (r == 0 || (r == -ETIMEDOUT &&
> > 						j = 0))
> > 					break;
> > 
> 
> Alan, you may want to skip the first timeout, but quit at the second
> timeout, right? If it is, the code may need to change like below:

No. If it times out immediately you want a second reset. If it times
out any time after that you want a retry of reading the descriptors.

	Regards
		Oliver


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux