On Wed, Dec 31, 2008 at 03:50:45PM +0100, David Flatz wrote:
> When I plug my Emagic emi 2|6 soundcard into my system usually the emi62
> module loads the firmware on the card and I can use it as a normal
> usb-audio device.
>
> With kernel 2.6.28 (and I don't really know which version of the kernel
> introcudes this since I didn't use the card for quite a while) the
> firmware gets loaded (the green lights on the card turn on) but the emi62
> module crashes with an oops and then I can't use any usb device anymore
> until I reboot.
>
>
> Keywords: emi62 soundcard usb firmware oops
>
>
> Kernel information:
> Version: Linux pornomat 2.6.28 #2 SMP Wed Dec 31 15:11:53 CET 2008 i686 Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz GenuineIntel GNU/Linux
> .config: see attachment
>
>
> I don't know which version of the kernel does not have the bug but I
> believe it worked with 2.6.27.2.
>
>
> Oops:
> usb 1-1: new full speed USB device using uhci_hcd and address 2
> usb 1-1: configuration #1 chosen from 1 choice
> emi26 - firmware loader 1-1:1.0: emi26_probe start
> usb 1-1: firmware: requesting emi26/loader.fw
> usb 1-1: firmware: requesting emi26/bitstream.fw
> usb 1-1: firmware: requesting emi26/firmware.fw
> usb 1-1: emi26_set_reset - 1
> usb 1-1: emi26_set_reset - 0
> BUG: unable to handle kernel NULL pointer dereference at 00000000
> IP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26]
> *pde = 00000000
> Oops: 0000 [#1] SMP
> last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/firmware/1-1/loading
> Modules linked in: emi26(+) ipv6 cpufreq_ondemand coretemp arc4 ecb iwl3945 irtty_sir sir_dev nsc_ircc ehci_hcd uhci_hcd mac80211 irda usbcore snd_hda_intel thinkpad_acpi rfkill hwmon led_class e1000e snd_pcm cfg80211 snd_timer crc_ccitt snd snd_page_alloc aes_generic
>
> Pid: 5082, comm: modprobe Not tainted (2.6.28 #2) 17023QG
> EIP: 0060:[<f80dc487>] EFLAGS: 00010206 CPU: 0
> EIP is at emi26_probe+0x2f7/0x620 [emi26]
> EAX: 0000015c EBX: 00000000 ECX: c1ffd9c0 EDX: 00000000
> ESI: 0000015c EDI: f6bb215c EBP: f6bb0400 ESP: f00ebcfc
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> Process modprobe (pid: 5082, ti=f00ea000 task=f5c7c700 task.ti=f00ea000)
> Stack:
> 0000015c 000000a5 f6a67cb8 f80dc7e0 c01c6262 fbef2986 f6bb2000 00008fe0
> 0000015c f715f748 f715f740 f715f738 f715f748 f6a67c00 f80dd040 f80dcfc0
> f6bb0400 fbacb290 f6a67c94 fbae0160 c01c70bf 00000000 f6a67c1c 00000000
> Call Trace:
> [<c01c6262>] sysfs_add_one+0x12/0x50
> [<fbacb290>] usb_probe_interface+0xa0/0x140 [usbcore]
> [<c01c70bf>] sysfs_create_link+0xf/0x20
> [<c02dead2>] driver_probe_device+0x82/0x180
> [<fbac9eeb>] usb_match_id+0x3b/0x50 [usbcore]
> [<c02dec4e>] __driver_attach+0x7e/0x80
> [<c02de27a>] bus_for_each_dev+0x3a/0x60
> [<c02de956>] driver_attach+0x16/0x20
> [<c02debd0>] __driver_attach+0x0/0x80
> [<c02de7b1>] bus_add_driver+0x1a1/0x220
> [<c02dee4d>] driver_register+0x4d/0x120
> [<c024e622>] idr_get_empty_slot+0xf2/0x290
> [<fbacab71>] usb_register_driver+0x81/0x100 [usbcore]
> [<f806c000>] emi26_init+0x0/0x14 [emi26]
> [<c0101126>] do_one_initcall+0x36/0x1b0
> [<c01c5e70>] sysfs_ilookup_test+0x0/0x10
> [<c0197a61>] ifind+0x31/0x90
> [<c01c6229>] __sysfs_add_one+0x59/0x80
> [<c01c64e4>] sysfs_addrm_finish+0x14/0x1c0
> [<c0175ca3>] __vunmap+0xa3/0xd0
> [<c014b854>] load_module+0x1544/0x1640
> [<c014b9d7>] sys_init_module+0x87/0x1b0
> [<c0187f41>] sys_read+0x41/0x70
> [<c01032a5>] sysenter_do_call+0x12/0x21
> [<c03d0000>] wait_for_common+0x40/0x110
> Code: 66 c1 e8 08 66 09 d0 75 a5 31 d2 89 e8 e8 72 fc ff ff 85 c0 0f 88 9a 02 00 00 b8 fa 00 00 00 e8 30 46 05 c8 8b 74 24 28 8b 5e 04 <8b> 03 89 44 24 1c 0f c8 89 44 24 1c 0f b7 4b 04 c7 44 24 20 00
> EIP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] SS:ESP 0068:f00ebcfc
> ---[ end trace 2eefa13825431230 ]---
Thanks for a report.
Please check whether appended patch resolves the problem.
---
From: Marcin Slusarz <marcin.slusarz@xxxxxxxxx>
Subject: [PATCH] emi26: fix oops on load
Fix oops introduced by commit ae93a55bf948753de0bb8e43fa9c027f786abb05
(emi26: use request_firmware()):
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
emi26 - firmware loader 1-1:1.0: emi26_probe start
usb 1-1: firmware: requesting emi26/loader.fw
usb 1-1: firmware: requesting emi26/bitstream.fw
usb 1-1: firmware: requesting emi26/firmware.fw
usb 1-1: emi26_set_reset - 1
usb 1-1: emi26_set_reset - 0
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26]
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/firmware/1-1/loading
Modules linked in: emi26(+) ipv6 cpufreq_ondemand coretemp arc4 ecb iwl3945 irtty_sir sir_dev nsc_ircc ehci_hcd uhci_hcd mac80211 irda usbcore snd_hda_intel thinkpad_acpi rfkill hwmon led_class e1000e snd_pcm cfg80211 snd_timer crc_ccitt snd snd_page_alloc aes_generic
Pid: 5082, comm: modprobe Not tainted (2.6.28 #2) 17023QG
EIP: 0060:[<f80dc487>] EFLAGS: 00010206 CPU: 0
EIP is at emi26_probe+0x2f7/0x620 [emi26]
EAX: 0000015c EBX: 00000000 ECX: c1ffd9c0 EDX: 00000000
ESI: 0000015c EDI: f6bb215c EBP: f6bb0400 ESP: f00ebcfc
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 5082, ti=f00ea000 task=f5c7c700 task.ti=f00ea000)
Stack:
0000015c 000000a5 f6a67cb8 f80dc7e0 c01c6262 fbef2986 f6bb2000 00008fe0
0000015c f715f748 f715f740 f715f738 f715f748 f6a67c00 f80dd040 f80dcfc0
f6bb0400 fbacb290 f6a67c94 fbae0160 c01c70bf 00000000 f6a67c1c 00000000
Call Trace:
[<c01c6262>] sysfs_add_one+0x12/0x50
[<fbacb290>] usb_probe_interface+0xa0/0x140 [usbcore]
[<c01c70bf>] sysfs_create_link+0xf/0x20
[<c02dead2>] driver_probe_device+0x82/0x180
[<fbac9eeb>] usb_match_id+0x3b/0x50 [usbcore]
[<c02dec4e>] __driver_attach+0x7e/0x80
[<c02de27a>] bus_for_each_dev+0x3a/0x60
[<c02de956>] driver_attach+0x16/0x20
[<c02debd0>] __driver_attach+0x0/0x80
[<c02de7b1>] bus_add_driver+0x1a1/0x220
[<c02dee4d>] driver_register+0x4d/0x120
[<c024e622>] idr_get_empty_slot+0xf2/0x290
[<fbacab71>] usb_register_driver+0x81/0x100 [usbcore]
[<f806c000>] emi26_init+0x0/0x14 [emi26]
[<c0101126>] do_one_initcall+0x36/0x1b0
[<c01c5e70>] sysfs_ilookup_test+0x0/0x10
[<c0197a61>] ifind+0x31/0x90
[<c01c6229>] __sysfs_add_one+0x59/0x80
[<c01c64e4>] sysfs_addrm_finish+0x14/0x1c0
[<c0175ca3>] __vunmap+0xa3/0xd0
[<c014b854>] load_module+0x1544/0x1640
[<c014b9d7>] sys_init_module+0x87/0x1b0
[<c0187f41>] sys_read+0x41/0x70
[<c01032a5>] sysenter_do_call+0x12/0x21
[<c03d0000>] wait_for_common+0x40/0x110
Code: 66 c1 e8 08 66 09 d0 75 a5 31 d2 89 e8 e8 72 fc ff ff 85 c0 0f 88 9a 02 00 00 b8 fa 00 00 00 e8 30 46 05 c8 8b 74 24 28 8b 5e 04 <8b> 03 89 44 24 1c 0f c8 89 44 24 1c 0f b7 4b 04 c7 44 24 20 00
EIP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] SS:ESP 0068:f00ebcfc
---[ end trace 2eefa13825431230 ]---
After the last "package" of firmware data is sent to the device, we dereference
NULL pointer (on access to rec->addr). Fix it.
Reported-by: David Flatz <david@xxxxxxx>
Signed-off-by: Marcin Slusarz <marcin.slusarz@xxxxxxxxx>
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxx>
Cc: stable <stable@xxxxxxxxxx> [2.6.27, 2.6.28]
---
drivers/usb/misc/emi26.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index e762beb..879a980 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -160,7 +160,7 @@ static int emi26_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
- } while (i > 0);
+ } while (rec);
/* Assert reset (stop the CPU in the EMI) */
err = emi26_set_reset(dev,1);
--
1.5.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
