If a gadget supports SuperSpeedPlus or higher speeds, return a
SuperSpeedPlus USB Device Capability descriptor.
Currently this implementation returns a fixed descriptor with typical
values set.
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
drivers/usb/gadget/composite.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index ce5dbc5..11d2433 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -597,6 +597,48 @@ static int bos_desc(struct usb_composite_dev *cdev)
ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
+ /* The SuperSpeedPlus USB Device Capability descriptor */
+ if (gadget_is_superspeed_plus(cdev->gadget)) {
+ struct usb_ssp_cap_descriptor *ssp_cap;
+
+ ssp_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+ bos->bNumDeviceCaps++;
+
+ /*
+ * Report typical values.
+ */
+
+ le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SSP_CAP_SIZE(1));
+ ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(1);
+ ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+ ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE;
+
+ /* SSAC = 1 (2 attributes) */
+ ssp_cap->bmAttributes = cpu_to_le32(1);
+
+ /* Min RX/TX Lane Count = 1 */
+ ssp_cap->wFunctionalitySupport = (1 << 8) | (1 << 12);
+
+ /*
+ * bmSublinkSpeedAttr[0]:
+ * ST = Symmetric, RX
+ * LSE = 3 (Gbps)
+ * LP = 1 (SuperSpeedPlus)
+ * LSM = 10 (10 Gbps)
+ */
+ ssp_cap->bmSublinkSpeedAttr[0] =
+ (3 << 4) | (1 << 14) | (0xa << 16);
+ /*
+ * bmSublinkSpeedAttr[1] =
+ * ST = Symmetric, TX
+ * LSE = 3 (Gbps)
+ * LP = 1 (SuperSpeedPlus)
+ * LSM = 10 (10 Gbps)
+ */
+ ssp_cap->bmSublinkSpeedAttr[1] =
+ (3 << 4) | (1 << 14) | (0xa << 16) | (1 << 7);
+ }
+
return le16_to_cpu(bos->wTotalLength);
}
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
