On Sat, Jan 16, 2016 at 01:46:24PM -0600, Konstantin Shkolnyy wrote:
> cp210x_get_config and cp210x_set_config are cumbersome to use. This change
> introduces new register access functions to replace them. New functions
> are not yet called - the switch is done gradually in following changes.
>
> Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@xxxxxxxxx>
> ---
> change in v3: Presented new function addition as a separate patch #1,
> to simplify code review.
Thanks for the v3.
You should not be adding (static) functions before they have a caller as
this generates compiler warnings.
Please define the new helper functions when converting their call
sites. You can split the 8, 16 and 32-bit helpers in separate patches and
possibly also separate read and write if that makes sense in order to
keep the diffs smaller.
> drivers/usb/serial/cp210x.c | 166 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 166 insertions(+)
>
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index fd67958..324eb7e 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -323,6 +323,172 @@ struct cp210x_comm_status {
> #define PURGE_ALL 0x000f
>
> /*
> + * Reads a variable-sized block of CP210X_ registers, identified by req.
> + * Returns data into buf in native USB byte order.
> + */
> +static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
> + void *buf, int bufsize)
> +{
> + struct usb_serial *serial = port->serial;
> + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
> + void *dmabuf;
> + int result;
> +
> + dmabuf = kmalloc(bufsize, GFP_KERNEL);
> + if (!dmabuf) {
> + /*
> + * FIXME Some callers don't bother to check for error,
> + * at least give them consistent junk until they are fixed
> + */
> + memset(buf, 0, bufsize);
Instead of adding these FIXMEs and possibly risk introducing regressions
(these functions used to leave the previous values unchanged on errors),
how about adding the missing error handling first?
> + return -ENOMEM;
> + }
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
