Change to use new 8-bit and 32-bit register access functions instead of
cp210x_get_config and cp210x_set_config.
Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@xxxxxxxxx>
---
change in v3: Presented new function addition as a separate patch #1,
to simplify code review.
drivers/usb/serial/cp210x.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 7a91c6c..1339d77 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -787,10 +787,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
{
struct device *dev = &port->dev;
unsigned int cflag, modem_ctl[4];
- unsigned int baud;
+ u32 baud;
u16 bits;
- cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
+ cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
*baudp = baud;
@@ -937,8 +937,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
baud = cp210x_quantise_baudrate(baud);
dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
- if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
- sizeof(baud))) {
+ if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
if (old_termios)
baud = old_termios->c_ospeed;
@@ -1109,10 +1108,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
static int cp210x_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned int control;
+ u8 control;
int result;
- cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+ cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
