This reverts commit 263b7fb557f7 ("usb: dwc2: Move reset into
dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB
ethernet fails, possibly due to being unable to pick up proper
parameters when performing a plain reset before reading hw params.
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
Reported-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Reported-by: Remi Pommarel <repk@xxxxxxxxxxxx>
---
drivers/usb/dwc2/core.c | 8 --------
drivers/usb/dwc2/platform.c | 8 +++++++-
2 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 73f2771..3a0bfde 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -3270,9 +3270,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
/**
* During device initialization, read various hardware configuration
* registers and interpret the contents.
- *
- * This should be called during driver probe. It will perform a core
- * soft reset in order to get the reset values of the parameters.
*/
int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
{
@@ -3280,7 +3277,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
unsigned width;
u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
u32 grxfsiz;
- int retval;
/*
* Attempt to ensure this device is really a DWC_otg Controller.
@@ -3300,10 +3296,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
- retval = dwc2_core_reset(hsotg);
- if (retval)
- return retval;
-
hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 5008a46..ecaa3d2 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -530,7 +530,13 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval)
return retval;
- /* Reset the controller and detect hardware config values */
+ /*
+ * Reset before dwc2_get_hwparams() then it could get power-on real
+ * reset value form registers.
+ */
+ dwc2_core_reset_and_force_dr_mode(hsotg);
+
+ /* Detect config values from hardware */
retval = dwc2_get_hwparams(hsotg);
if (retval)
goto error;
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
