Re: MX28 with hub cannot reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, 

> Peter Chen <hzpeterchen@xxxxxxxxx> hat am 23. Dezember 2015 um 10:49
> geschrieben:
>
>
> On Wed, Dec 23, 2015 at 6:54 AM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
> > Hi,
> >
> > On a mx28 custom board with a USB hub I can get a USB stick to get
> > detected after applying this change:
> > http://marc.info/?l=linux-usb&m=145079935324339&w=2
> >
> > Things work fine if I boot without the USB stick connected. Then I can
> > insert/remove the USB device and it always gets detected.

i want to know more about this issue:

Are there any unaffected Mainline Kernel versions?

Are there special hardware requirements to reproduce this issue?

Is this issue documented in a chip errata?

Is it reproducable with an i.MX28 EVK?

Is i.MX23 affected, too?

Thanks in advance

Best regards
Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux