This patch replaces the "exception" bitflag in the ehci_qh structure
with a more explicit "unlink_reason" bitmask. This is for use in the
following patch, where we will need to have a good idea of the
reason for unlinking a QH, not just "something exceptional happened".
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Tested-by: Michael Reutman <mreutman@xxxxxxxxxxxxxxxxx>
---
[as1792]
drivers/usb/host/ehci-hcd.c | 11 +++++++----
drivers/usb/host/ehci-q.c | 13 +++++++++----
drivers/usb/host/ehci-sched.c | 2 +-
drivers/usb/host/ehci-timer.c | 1 +
drivers/usb/host/ehci.h | 10 ++++++++--
5 files changed, 26 insertions(+), 11 deletions(-)
Index: usb-4.3/drivers/usb/host/ehci.h
===================================================================
--- usb-4.3.orig/drivers/usb/host/ehci.h
+++ usb-4.3/drivers/usb/host/ehci.h
@@ -432,13 +432,19 @@ struct ehci_qh {
u8 xacterrs; /* XactErr retry counter */
#define QH_XACTERR_MAX 32 /* XactErr retry limit */
+ u8 unlink_reason;
+#define QH_UNLINK_HALTED 0x01 /* Halt flag is set */
+#define QH_UNLINK_SHORT_READ 0x02 /* Recover from a short read */
+#define QH_UNLINK_DUMMY_OVERLAY 0x04 /* QH overlayed the dummy TD */
+#define QH_UNLINK_SHUTDOWN 0x08 /* The HC isn't running */
+#define QH_UNLINK_QUEUE_EMPTY 0x10 /* Reached end of the queue */
+#define QH_UNLINK_REQUESTED 0x20 /* Disable, reset, or dequeue */
+
u8 gap_uf; /* uframes split/csplit gap */
unsigned is_out:1; /* bulk or intr OUT */
unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
unsigned dequeue_during_giveback:1;
- unsigned exception:1; /* got a fault, or an unlink
- was requested */
unsigned should_be_inactive:1;
};
Index: usb-4.3/drivers/usb/host/ehci-hcd.c
===================================================================
--- usb-4.3.orig/drivers/usb/host/ehci-hcd.c
+++ usb-4.3/drivers/usb/host/ehci-hcd.c
@@ -911,7 +911,7 @@ static int ehci_urb_dequeue(struct usb_h
*/
} else {
qh = (struct ehci_qh *) urb->hcpriv;
- qh->exception = 1;
+ qh->unlink_reason |= QH_UNLINK_REQUESTED;
switch (qh->qh_state) {
case QH_STATE_LINKED:
if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)
@@ -972,10 +972,13 @@ rescan:
goto done;
}
- qh->exception = 1;
+ qh->unlink_reason |= QH_UNLINK_REQUESTED;
switch (qh->qh_state) {
case QH_STATE_LINKED:
- WARN_ON(!list_empty(&qh->qtd_list));
+ if (list_empty(&qh->qtd_list))
+ qh->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
+ else
+ WARN_ON(1);
if (usb_endpoint_type(&ep->desc) != USB_ENDPOINT_XFER_INT)
start_unlink_async(ehci, qh);
else
@@ -1042,7 +1045,7 @@ ehci_endpoint_reset(struct usb_hcd *hcd,
* re-linking will call qh_refresh().
*/
usb_settoggle(qh->ps.udev, epnum, is_out, 0);
- qh->exception = 1;
+ qh->unlink_reason |= QH_UNLINK_REQUESTED;
if (eptype == USB_ENDPOINT_XFER_BULK)
start_unlink_async(ehci, qh);
else
Index: usb-4.3/drivers/usb/host/ehci-q.c
===================================================================
--- usb-4.3.orig/drivers/usb/host/ehci-q.c
+++ usb-4.3/drivers/usb/host/ehci-q.c
@@ -394,6 +394,7 @@ qh_completions (struct ehci_hcd *ehci, s
goto retry_xacterr;
}
stopped = 1;
+ qh->unlink_reason |= QH_UNLINK_HALTED;
/* magic dummy for some short reads; qh won't advance.
* that silicon quirk can kick in with this dummy too.
@@ -408,6 +409,7 @@ qh_completions (struct ehci_hcd *ehci, s
&& !(qtd->hw_alt_next
& EHCI_LIST_END(ehci))) {
stopped = 1;
+ qh->unlink_reason |= QH_UNLINK_SHORT_READ;
}
/* stop scanning when we reach qtds the hc is using */
@@ -420,8 +422,10 @@ qh_completions (struct ehci_hcd *ehci, s
stopped = 1;
/* cancel everything if we halt, suspend, etc */
- if (ehci->rh_state < EHCI_RH_RUNNING)
+ if (ehci->rh_state < EHCI_RH_RUNNING) {
last_status = -ESHUTDOWN;
+ qh->unlink_reason |= QH_UNLINK_SHUTDOWN;
+ }
/* this qtd is active; skip it unless a previous qtd
* for its urb faulted, or its urb was canceled.
@@ -538,10 +542,10 @@ qh_completions (struct ehci_hcd *ehci, s
* except maybe high bandwidth ...
*/
if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci))
- qh->exception = 1;
+ qh->unlink_reason |= QH_UNLINK_DUMMY_OVERLAY;
/* Let the caller know if the QH needs to be unlinked. */
- return qh->exception;
+ return qh->unlink_reason;
}
/*-------------------------------------------------------------------------*/
@@ -1003,7 +1007,7 @@ static void qh_link_async (struct ehci_h
qh->qh_state = QH_STATE_LINKED;
qh->xacterrs = 0;
- qh->exception = 0;
+ qh->unlink_reason = 0;
/* qtd completions reported later by interrupt */
enable_async(ehci);
@@ -1395,6 +1399,7 @@ static void unlink_empty_async(struct eh
/* If nothing else is being unlinked, unlink the last empty QH */
if (list_empty(&ehci->async_unlink) && qh_to_unlink) {
+ qh_to_unlink->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
start_unlink_async(ehci, qh_to_unlink);
--count;
}
Index: usb-4.3/drivers/usb/host/ehci-sched.c
===================================================================
--- usb-4.3.orig/drivers/usb/host/ehci-sched.c
+++ usb-4.3/drivers/usb/host/ehci-sched.c
@@ -595,7 +595,7 @@ static void qh_link_periodic(struct ehci
}
qh->qh_state = QH_STATE_LINKED;
qh->xacterrs = 0;
- qh->exception = 0;
+ qh->unlink_reason = 0;
/* update per-qh bandwidth for debugfs */
ehci_to_hcd(ehci)->self.bandwidth_allocated += qh->ps.bw_period
Index: usb-4.3/drivers/usb/host/ehci-timer.c
===================================================================
--- usb-4.3.orig/drivers/usb/host/ehci-timer.c
+++ usb-4.3/drivers/usb/host/ehci-timer.c
@@ -237,6 +237,7 @@ static void ehci_handle_start_intr_unlin
ehci->intr_unlink_wait_cycle))
break;
list_del_init(&qh->unlink_node);
+ qh->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
start_unlink_intr(ehci, qh);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
