On 2015년 12월 18일 06:20, Sergei Shtylyov wrote:
> Hello.
>
> On 12/17/2015 05:34 AM, Chanwoo Choi wrote:
>
>>> On 2015년 12월 17일 03:07, Sergei Shtylyov wrote:
>>>> Maxim Integrated MAX3355E chip integrates a charge pump and comparators to
>>>> enable a system with an integrated USB OTG dual-role transceiver to
>>>> function as an USB OTG dual-role device. In addition to sensing/controlling
>>>> Vbus, the chip also passes thru the ID signal from the USB OTG connector.
>>>> On some Renesas boards, this signal is just fed into the SoC thru a GPIO
>>>> pin -- there's no real OTG controller, only host and gadget USB controllers
>>>> sharing the same USB bus; however, we'd like to allow host or gadget
>>>> drivers to be loaded depending on the cable type, hence the need for the
>>>> MAX3355 extcon driver. The Vbus status signals are also wired to GPIOs
>>>> (however, we aren't currently interested in them), the OFFVBUS# signal is
>>>> controlled by the host controllers, there's also the SHDN# signal wired to
>>>> a GPIO, it should be driven high for the normal operation.
>>>>
>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>>>>
>>>> ---
>>>> Changes in version 3:
>>>> - reformatted the change log.
>>>>
>>>> Changes in version 2:
>>>> - added the USB gadget cable support;
>>>> - added the remove() driver method which drives SHDN# GPIO low to save power;
>>>> - dropped vendor prefix from the ID GPIO property name;
>>>> - changed the GPIO property name suffix to "-gpios";
>>>> - switched to usign extcon_set_cable_state_() API;
>>>> - switched to using the gpiod/sleeping 'gpiolib' APIs;
>>>> - addded error messages to max3355_probe();
>>>> - added IRQF_NO_SUSPEND flasg to the devm_request_threaded_irq() call;
>>>> - renamed 'ret' variable to 'err' in max3355_probe();
>>>> - expanded the Kconfig entry help text;
>>>> - added vendor name to the patch summary, the bindings document, the Kconfig
>>>> entry, the driver heading comment, the module description, and the change log;
>>>> - fixed up and reformatted the change log.
>>>>
>>>> Documentation/devicetree/bindings/extcon/extcon-max3355.txt | 21 +
>>>> drivers/extcon/Kconfig | 8
>>>> drivers/extcon/Makefile | 1
>>>> drivers/extcon/extcon-max3355.c | 153 ++++++++++++
>>>> 4 files changed, 183 insertions(+)
>>>>
>>
>> [snip]
>>
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int max3355_remove(struct platform_device *pdev)
>>>> +{
>>>> + struct max3355_data *data = platform_get_drvdata(pdev);
>>>> +
>>>> + gpiod_set_value_cansleep(data->shdn_gpiod, 0);
>>
>> Don't need to handle the 'shdn' gpio on resume/suspend funtcion?
>>
>> But, if the interrput of id gpio is used for wakeup source,
>> there is no reason to handle it for suspend mode.
>
> You told me to pass IRQF_NO_SUSPEND to devm_request_threaded_irq(), didn't you?
Yes. You add the this flag on v4 patch. Looks good to me.
Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
