On Mon, Dec 14, 2015 at 10:35:19AM +0100, Arnd Bergmann wrote: > On Monday 14 December 2015 15:26:11 Peter Chen wrote: > > Hi all, > > > > There is a known issue that the USB code can't handle USB HUB's > > external pins well, in that case, it may cause some onboard > > USB HUBs can't work since their PHY's clock or reset pin needs to > > operate. > > > > The user reported this issue at below: > > http://www.spinics.net/lists/linux-usb/msg131502.html > > > > In this patch set, I add a generic onboard USB HUB driver to > > handle this problem, the external signals will be configured > > before usb controller's initialization, it much likes we did > > it at board code before. > > > > The user needs to add this generic hub node at dts to support it. > > > > @The udoo users, help to test please. > > I still think need to do this properly by representing the hub > device as a USB device, using power sequencing code like MMC does. > > Arnd I will try to have a patch set for general onboard USB device. -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
