usb 3.1 extend the hub get-port-status request by adding different
request types. the new request types return 4 additional bytes called
extended port status, these bytes are returned after the regular
portstatus and portchange values.
The extended port status contains a speed ID for the currently used
sublink speed. A table of supported Speed IDs with details about the link
is provided by the hub in the device descriptor BOS SuperSpeedPlus
device capability Sublink Speed Attributes.
Support this new request. Ask for the extended port status after port
reset if hub supports USB 3.1. If link is running at SuperSpeedPlus
set the device speed to USB_SPEED_SUPER_PLUS
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
drivers/usb/core/hcd.c | 8 ++++-
drivers/usb/core/hub.c | 70 +++++++++++++++++++++++++++++++++++++------
drivers/usb/core/hub.h | 7 +++++
include/uapi/linux/usb/ch11.h | 21 +++++++++++++
4 files changed, 96 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index bca13a0..9af9506 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -668,9 +668,15 @@ nongeneric:
/* non-generic request */
switch (typeReq) {
case GetHubStatus:
- case GetPortStatus:
len = 4;
break;
+ case GetPortStatus:
+ if (wValue == HUB_PORT_STATUS)
+ len = 4;
+ else
+ /* other port status types return 8 bytes */
+ len = 8;
+ break;
case GetHubDescriptor:
len = sizeof (struct usb_hub_descriptor);
break;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 79c08a3..e3423f1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -533,29 +533,34 @@ static int get_hub_status(struct usb_device *hdev,
/*
* USB 2.0 spec Section 11.24.2.7
+ * USB 3.1 takes into use the wValue and wLength fields, spec Section 10.16.2.6
*/
static int get_port_status(struct usb_device *hdev, int port1,
- struct usb_port_status *data)
+ void *data, u16 value, u16 length)
{
int i, status = -ETIMEDOUT;
for (i = 0; i < USB_STS_RETRIES &&
(status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
- USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
- data, sizeof(*data), USB_STS_TIMEOUT);
+ USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, value,
+ port1, data, length, USB_STS_TIMEOUT);
}
return status;
}
-static int hub_port_status(struct usb_hub *hub, int port1,
- u16 *status, u16 *change)
+static int hub_ext_port_status(struct usb_hub *hub, int port1, int type,
+ u16 *status, u16 *change, u32 *ext_status)
{
int ret;
+ int len = 4;
+
+ if (type != HUB_PORT_STATUS)
+ len = 8;
mutex_lock(&hub->status_mutex);
- ret = get_port_status(hub->hdev, port1, &hub->status->port);
- if (ret < 4) {
+ ret = get_port_status(hub->hdev, port1, &hub->status->port, type, len);
+ if (ret < len) {
if (ret != -ENODEV)
dev_err(hub->intfdev,
"%s failed (err = %d)\n", __func__, ret);
@@ -564,13 +569,22 @@ static int hub_port_status(struct usb_hub *hub, int port1,
} else {
*status = le16_to_cpu(hub->status->port.wPortStatus);
*change = le16_to_cpu(hub->status->port.wPortChange);
-
+ if (type != HUB_PORT_STATUS && ext_status)
+ *ext_status = le32_to_cpu(
+ hub->status->port.dwExtPortStatus);
ret = 0;
}
mutex_unlock(&hub->status_mutex);
return ret;
}
+static int hub_port_status(struct usb_hub *hub, int port1,
+ u16 *status, u16 *change)
+{
+ return hub_ext_port_status(hub, port1, HUB_PORT_STATUS,
+ status, change, NULL);
+}
+
static void kick_hub_wq(struct usb_hub *hub)
{
struct usb_interface *intf;
@@ -2592,6 +2606,32 @@ out_authorized:
return result;
}
+/*
+ * Return 1 if port speed is SuperSpeedPlus, 0 otherwise
+ * check it from the link protocol field of the current speed ID attribute.
+ * current speed ID is got from ext port status request. Sublink speed attribute
+ * table is returned with the hub BOS SSP device capability descriptor
+ */
+static int port_speed_is_ssp(struct usb_device *hdev, int speed_id)
+{
+ int ssa_count;
+ u32 ss_attr;
+ int i;
+ struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap;
+
+ if (!ssp_cap)
+ return 0;
+
+ ssa_count = le32_to_cpu(ssp_cap->bmAttributes) &
+ USB_SSP_SUBLINK_SPEED_ATTRIBS;
+
+ for (i = 0; i <= ssa_count; i++) {
+ ss_attr = le32_to_cpu(ssp_cap->bmSublinkSpeedAttr[i]);
+ if (speed_id == (ss_attr & USB_SSP_SUBLINK_SPEED_SSID))
+ return !!(ss_attr & USB_SSP_SUBLINK_SPEED_LP);
+ }
+ return 0;
+}
/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
static unsigned hub_is_wusb(struct usb_hub *hub)
@@ -2656,6 +2696,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
int delay_time, ret;
u16 portstatus;
u16 portchange;
+ u32 ext_portstatus = 0;
for (delay_time = 0;
delay_time < HUB_RESET_TIMEOUT;
@@ -2664,7 +2705,14 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
msleep(delay);
/* read and decode port status */
- ret = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (hub_is_superspeedplus(hub->hdev))
+ ret = hub_ext_port_status(hub, port1,
+ HUB_EXT_PORT_STATUS,
+ &portstatus, &portchange,
+ &ext_portstatus);
+ else
+ ret = hub_port_status(hub, port1, &portstatus,
+ &portchange);
if (ret < 0)
return ret;
@@ -2707,6 +2755,10 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
+ else if (hub_is_superspeedplus(hub->hdev) &&
+ port_speed_is_ssp(hub->hdev, ext_portstatus &
+ USB_EXT_PORT_STAT_RX_SPEED_ID))
+ udev->speed = USB_SPEED_SUPER_PLUS;
else if (hub_is_superspeed(hub->hdev))
udev->speed = USB_SPEED_SUPER;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 45d070d..34c1a7e 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -140,6 +140,13 @@ static inline int hub_is_superspeed(struct usb_device *hdev)
return hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS;
}
+static inline int hub_is_superspeedplus(struct usb_device *hdev)
+{
+ return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS &&
+ le16_to_cpu(hdev->descriptor.bcdUSB) >= 0x0310 &&
+ hdev->bos->ssp_cap);
+}
+
static inline unsigned hub_power_on_good_delay(struct usb_hub *hub)
{
unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2;
diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h
index 331499d..361297e 100644
--- a/include/uapi/linux/usb/ch11.h
+++ b/include/uapi/linux/usb/ch11.h
@@ -30,6 +30,14 @@
#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
/*
+ * Port status type for GetPortStatus requests added in USB 3.1
+ * See USB 3.1 spec Table 10-12
+ */
+#define HUB_PORT_STATUS 0
+#define HUB_PORT_PD_STATUS 1
+#define HUB_EXT_PORT_STATUS 2
+
+/*
* Hub class requests
* See USB 2.0 spec Table 11-16
*/
@@ -97,10 +105,13 @@
/*
* Hub Status and Hub Change results
* See USB 2.0 spec Table 11-19 and Table 11-20
+ * USB 3.1 extends the port status request and may return 4 additional bytes.
+ * See USB 3.1 spec section 10.16.2.6 Table 10-12 and 10-15
*/
struct usb_port_status {
__le16 wPortStatus;
__le16 wPortChange;
+ __le32 dwExtPortStatus;
} __attribute__ ((packed));
/*
@@ -173,6 +184,16 @@ struct usb_port_status {
#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080
/*
+ * USB 3.1 dwExtPortStatus field masks
+ * See USB 3.1 spec 10.16.2.6.3 Table 10-15
+ */
+
+#define USB_EXT_PORT_STAT_RX_SPEED_ID 0x0000000f
+#define USB_EXT_PORT_STAT_TX_SPEED_ID 0x000000f0
+#define USB_EXT_PORT_STAT_RX_LANES 0x00000f00
+#define USB_EXT_PORT_STAT_TX_LANES 0x0000f000
+
+/*
* wHubCharacteristics (masks)
* See USB 2.0 spec Table 11-13, offset 3
*/
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
