On two different laptops (HP 250 G3 Intel N2830 - Lenovo B50-30 Intel
N2840) the system hangs while powering down, restart, closing lid and
doing "rmmod ehci_pci" if the modules xhci_pci/xhci_hcd are loaded
before ehci_pci/ehci_hcd.
The problem seems related to Intel processor/chipset: a similar laptop
(Lenovo B50-45) but with AMD E1-6010 processor does not have any problem.
The problem seems to be present in any kernel version (I tested 3.16,
3.17, 3.18, 3.19, 4.0.5, 4.3rc5).
Attached dmesg for both cases ("hang" and "not-hang" kernel modules load
sequence). In "not-hang" case, there are many errors "ehci-pci
0000:00:1d.0: port 1 reset error -110" during boot, slowing down startup.
Thanks,
Luca
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0 (root@hp250) (gcc version 4.8.4 (GCC) ) #5 SMP PREEMPT Mon Nov 2 17:22:35 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-generic root=/dev/mapper/RICKY-root ro rootflags=subvol=@ noquiet nosplash reboot=force,cold
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000751dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000751db000-0x00000000751defff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000751df000-0x00000000781defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000781df000-0x000000007826efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007826f000-0x0000000078aeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078aef000-0x0000000078beefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000078bef000-0x0000000078c2efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000078c2f000-0x00000000796f0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000796f1000-0x0000000079ff0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079ff1000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x78c2e014 SMBIOS=0x78aee000
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[ 0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[ 0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem07: type=10, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem09: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem10: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
[ 0.000000] efi: mem12: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002239000) (18MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000002239000-0x000000001f000000) (461MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x000000001f000000-0x000000001f100000) (1MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000001f100000-0x0000000020000000) (15MB)
[ 0.000000] efi: mem17: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000020100000-0x0000000034e7a000) (333MB)
[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x0000000034e7a000-0x0000000036735000) (24MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000036735000-0x00000000528f0000) (449MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x00000000528f0000-0x0000000070000000) (471MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x0000000070000000-0x0000000070020000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x0000000070020000-0x00000000750f1000) (80MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000750f1000-0x00000000751db000) (0MB)
[ 0.000000] efi: mem25: type=6, attr=0x800000000000000f, range=[0x00000000751db000-0x00000000751df000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000751df000-0x00000000751f3000) (0MB)
[ 0.000000] efi: mem27: type=2, attr=0xf, range=[0x00000000751f3000-0x00000000752df000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000752df000-0x00000000753b9000) (0MB)
[ 0.000000] efi: mem29: type=1, attr=0xf, range=[0x00000000753b9000-0x00000000754df000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000754df000-0x000000007611e000) (12MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000007611e000-0x00000000779df000) (24MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000779df000-0x0000000077e7e000) (4MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x0000000077e7e000-0x0000000077e88000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x0000000077e88000-0x00000000781df000) (3MB)
[ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000781df000-0x000000007826f000) (0MB)
[ 0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x000000007826f000-0x00000000784ef000) (2MB)
[ 0.000000] efi: mem37: type=0, attr=0xf, range=[0x00000000784ef000-0x0000000078aef000) (6MB)
[ 0.000000] efi: mem38: type=10, attr=0xf, range=[0x0000000078aef000-0x0000000078bef000) (1MB)
[ 0.000000] efi: mem39: type=9, attr=0xf, range=[0x0000000078bef000-0x0000000078c2f000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x0000000078c2f000-0x00000000796f1000) (10MB)
[ 0.000000] efi: mem41: type=10, attr=0xf, range=[0x00000000796f1000-0x0000000079ff1000) (9MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x0000000079ff1000-0x000000007a000000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000100000000-0x0000000180000000) (2048MB)
[ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem45: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 80ES/Lenovo B50-30, BIOS 9CCN30WW(V2.08) 11/26/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 3 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 4 base 07AE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000024000] 24000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01edd000, 0x01eddfff] PGTABLE
[ 0.000000] BRK [0x01ede000, 0x01edefff] PGTABLE
[ 0.000000] BRK [0x01edf000, 0x01edffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 2M
[ 0.000000] BRK [0x01ee0000, 0x01ee0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[ 0.000000] [mem 0x100000000-0x17bffffff] page 2M
[ 0.000000] BRK [0x01ee1000, 0x01ee1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[ 0.000000] [mem 0x1f100000-0x1f1fffff] page 4k
[ 0.000000] [mem 0x1f200000-0x1fffffff] page 2M
[ 0.000000] BRK [0x01ee2000, 0x01ee2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x751dafff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0x74ffffff] page 2M
[ 0.000000] [mem 0x75000000-0x751dafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x751df000-0x781defff]
[ 0.000000] [mem 0x751df000-0x751fffff] page 4k
[ 0.000000] [mem 0x75200000-0x77ffffff] page 2M
[ 0.000000] [mem 0x78000000-0x781defff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x78c2f000-0x796f0fff]
[ 0.000000] [mem 0x78c2f000-0x78dfffff] page 4k
[ 0.000000] [mem 0x78e00000-0x795fffff] page 2M
[ 0.000000] [mem 0x79600000-0x796f0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79ff1000-0x79ffffff]
[ 0.000000] [mem 0x79ff1000-0x79ffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x34e7a000-0x36734fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000078C2E014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x0000000078C2E120 00008C (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000078C2B000 0000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000078C19000 00C0AA (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000078BB8000 000040
[ 0.000000] ACPI: LPIT 0x0000000078C29000 000104 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000078C27000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000078C17000 000290 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000078C2D000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000078C28000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000078C18000 000763 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000078C16000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000078C2A000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000078C15000 00017A (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000078C14000 0003E6 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000078C13000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000078C26000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff88017b600000-ffff88017f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1effffff]
[ 0.000000] node 0: [mem 0x1f100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0x751dafff]
[ 0.000000] node 0: [mem 0x751df000-0x781defff]
[ 0.000000] node 0: [mem 0x78c2f000-0x796f0fff]
[ 0.000000] node 0: [mem 0x79ff1000-0x79ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1018418
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1135 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7659 pages used for memmap
[ 0.000000] DMA32 zone: 490156 pages, LIFO batch:31
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 103
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x751db000-0x751defff]
[ 0.000000] PM: Registered nosave memory: [mem 0x781df000-0x7826efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7826f000-0x78aeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78aef000-0x78beefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78bef000-0x78c2efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x796f1000-0x79ff0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a000000-0x7affffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7effffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f000000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88017fc00000 s79744 r8192 d22656 u524288
[ 0.000000] pcpu-alloc: s79744 r8192 d22656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1001368
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-generic root=/dev/mapper/RICKY-root ro rootflags=subvol=@ noquiet nosplash reboot=force,cold
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3850148K/4073672K available (8130K kernel code, 875K rwdata, 2520K rodata, 1188K init, 824K bss, 223524K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 2163200 KHz
[ 0.000000] lapic_timer_frequency = 83200
[ 0.000000] tsc: Detected 2163.200 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.40 BogoMIPS (lpj=2163200)
[ 0.000015] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20140424
[ 0.022302] ACPI: All ACPI Tables successfully acquired
[ 0.027316] Security Framework initialized
[ 0.027347] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.027356] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.027694] Initializing cgroup subsys devices
[ 0.027711] Initializing cgroup subsys freezer
[ 0.027721] Initializing cgroup subsys net_cls
[ 0.027732] Initializing cgroup subsys blkio
[ 0.027743] Initializing cgroup subsys perf_event
[ 0.027773] CPU: Physical Processor ID: 0
[ 0.027779] CPU: Processor Core ID: 0
[ 0.027787] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032579] mce: CPU supports 6 MCE banks
[ 0.032590] CPU0: Thermal monitoring handled by SMI
[ 0.032599] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
tlb_flushall_shift: 6
[ 0.032727] Freeing SMP alternatives memory: 32K (ffffffff81e05000 - ffffffff81e0d000)
[ 0.035877] ftrace: allocating 28906 entries in 113 pages
[ 0.052706] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062711] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
[ 0.062743] TSC deadline timer enabled
[ 0.062776] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.062798] ... version: 3
[ 0.062803] ... bit width: 40
[ 0.062807] ... generic registers: 2
[ 0.062812] ... value mask: 000000ffffffffff
[ 0.062817] ... max period: 000000ffffffffff
[ 0.062821] ... fixed-purpose events: 3
[ 0.062826] ... event mask: 0000000700000003
[ 0.068883] x86: Booting SMP configuration:
[ 0.068892] .... node #0, CPUs: #1
[ 0.084669] CPU1: Thermal monitoring handled by SMI
[ 0.086771] x86: Booted up 1 node, 2 CPUs
[ 0.086783] smpboot: Total of 2 processors activated (8652.80 BogoMIPS)
[ 0.087277] devtmpfs: initialized
[ 0.094220] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
[ 0.094231] PM: Registering ACPI NVS region [mem 0x78aef000-0x78beefff] (1048576 bytes)
[ 0.094270] PM: Registering ACPI NVS region [mem 0x796f1000-0x79ff0fff] (9437184 bytes)
[ 0.095014] xor: measuring software checksum speed
[ 0.104766] prefetch64-sse: 7264.000 MB/sec
[ 0.114776] generic_sse: 6548.000 MB/sec
[ 0.114785] xor: using function: prefetch64-sse (7264.000 MB/sec)
[ 0.114800] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.114808] pinctrl core: initialized pinctrl subsystem
[ 0.114953] regulator-dummy: no parameters
[ 0.115069] NET: Registered protocol family 16
[ 0.115262] cpuidle: using governor ladder
[ 0.115270] cpuidle: using governor menu
[ 0.115336] ACPI: bus type PCI registered
[ 0.115343] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.115474] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.115484] PCI: not using MMCONFIG
[ 0.115489] PCI: Using configuration type 1 for base access
[ 0.136833] raid6: sse2x1 761 MB/s
[ 0.153912] raid6: sse2x2 777 MB/s
[ 0.170873] raid6: sse2x4 1191 MB/s
[ 0.170879] raid6: using algorithm sse2x4 (1191 MB/s)
[ 0.170885] raid6: using ssse3x2 recovery algorithm
[ 0.170980] ACPI: Added _OSI(Module Device)
[ 0.170987] ACPI: Added _OSI(Processor Device)
[ 0.170993] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.170998] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.190075] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.190812] ACPI: Dynamic OEM Table Load:
[ 0.190830] ACPI: SSDT 0xFFFF88017B0CD800 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20121220)
[ 0.192171] ACPI: Dynamic OEM Table Load:
[ 0.192187] ACPI: SSDT 0xFFFF88017B0CE000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.196412] ACPI: Dynamic OEM Table Load:
[ 0.196427] ACPI: SSDT 0xFFFF88017B097800 00015F (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.200091] ACPI: Dynamic OEM Table Load:
[ 0.200105] ACPI: SSDT 0xFFFF88017B094D80 00008D (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.205180] ACPI: Interpreter enabled
[ 0.205195] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.205210] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.205246] ACPI: (supports S0 S3 S4 S5)
[ 0.205252] ACPI: Using IOAPIC for interrupt routing
[ 0.205297] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.206214] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.206366] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.300499] ACPI: Power Resource [USBC] (on)
[ 0.308404] ACPI: Power Resource [PLPE] (on)
[ 0.308717] ACPI: Power Resource [PLPE] (on)
[ 0.317408] ACPI: Power Resource [CLK0] (on)
[ 0.317494] ACPI: Power Resource [CLK1] (on)
[ 0.385797] ACPI: Power Resource [FN00] (off)
[ 0.386983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.386997] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.393587] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.393994] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[ 0.394498] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.394828] PCI host bridge to bus 0000:00
[ 0.394838] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.394845] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.394852] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.394859] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.394866] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.394873] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.394880] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.394887] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe]
[ 0.394903] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.395062] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.395080] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.395093] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.395105] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057]
[ 0.395289] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[ 0.395313] pci 0000:00:13.0: reg 0x10: [io 0x3048-0x304f]
[ 0.395324] pci 0000:00:13.0: reg 0x14: [io 0x305c-0x305f]
[ 0.395335] pci 0000:00:13.0: reg 0x18: [io 0x3040-0x3047]
[ 0.395346] pci 0000:00:13.0: reg 0x1c: [io 0x3058-0x305b]
[ 0.395357] pci 0000:00:13.0: reg 0x20: [io 0x3020-0x303f]
[ 0.395368] pci 0000:00:13.0: reg 0x24: [mem 0x90914000-0x909147ff]
[ 0.395419] pci 0000:00:13.0: PME# supported from D3hot
[ 0.395563] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.395586] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
[ 0.395649] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.395751] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.395841] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.395870] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
[ 0.395885] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
[ 0.395993] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.396136] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.396163] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
[ 0.396239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.396383] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.396451] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.396528] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.396606] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.396674] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.396750] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.396827] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.396894] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.396972] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.397048] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ 0.397116] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.397192] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.397288] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
[ 0.397319] pci 0000:00:1d.0: reg 0x10: [mem 0x90915000-0x909153ff]
[ 0.397443] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.397552] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.397629] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.397833] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.397871] pci 0000:00:1f.3: reg 0x10: [mem 0x90916000-0x9091601f]
[ 0.397945] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
[ 0.398238] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.398405] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.398438] pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x90600fff]
[ 0.398634] pci 0000:02:00.0: supports D1 D2
[ 0.398638] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 0.398688] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.400302] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.400314] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
[ 0.400444] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.400480] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.400515] pci 0000:03:00.0: reg 0x18: [mem 0x90504000-0x90504fff 64bit]
[ 0.400539] pci 0000:03:00.0: reg 0x20: [mem 0x90500000-0x90503fff 64bit]
[ 0.400654] pci 0000:03:00.0: supports D1 D2
[ 0.400658] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.400758] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.402295] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.402305] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.402311] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
[ 0.402424] pci 0000:04:00.0: [10ec:b723] type 00 class 0x028000
[ 0.402450] pci 0000:04:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.402484] pci 0000:04:00.0: reg 0x18: [mem 0x90400000-0x90403fff 64bit]
[ 0.402600] pci 0000:04:00.0: supports D1 D2
[ 0.402604] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.402647] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.404288] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.404298] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.404304] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff]
[ 0.404353] pci_bus 0000:00: on NUMA node 0
[ 0.448002] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.448144] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.448281] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.448428] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.448566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.448707] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.448850] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.448988] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.451157] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.451383] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.451574] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.451587] vgaarb: loaded
[ 0.451592] vgaarb: bridge control possible 0000:00:02.0
[ 0.451724] SCSI subsystem initialized
[ 0.451812] libata version 3.00 loaded.
[ 0.451825] ACPI: bus type USB registered
[ 0.451877] usbcore: registered new interface driver usbfs
[ 0.451903] usbcore: registered new interface driver hub
[ 0.451963] usbcore: registered new device driver usb
[ 0.452188] PCI: Using ACPI for IRQ routing
[ 0.453616] PCI: pci_cache_line_size set to 64 bytes
[ 0.453698] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.453702] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.453706] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[ 0.453709] e820: reserve RAM buffer [mem 0x751db000-0x77ffffff]
[ 0.453712] e820: reserve RAM buffer [mem 0x781df000-0x7bffffff]
[ 0.453715] e820: reserve RAM buffer [mem 0x796f1000-0x7bffffff]
[ 0.453718] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.453999] Switched to clocksource refined-jiffies
[ 0.464245] pnp: PnP ACPI init
[ 0.464282] ACPI: bus type PNP registered
[ 0.464369] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.464526] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.464536] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.464544] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.464551] system 00:01: [io 0xfd40-0xfd7f] has been reserved
[ 0.464559] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.464569] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.464760] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.464832] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.464987] pnp 00:04: Plug and Play ACPI device, IDs SYN2b38 PNP0f13 (active)
[ 0.508244] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.508254] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.508262] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.508270] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.508278] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
[ 0.508285] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.508293] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.508301] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.508308] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.508317] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.510343] pnp: PnP ACPI: found 6 devices
[ 0.510350] ACPI: bus type PNP unregistered
[ 0.518764] Switched to clocksource acpi_pm
[ 0.518790] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.518797] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.518802] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.518812] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.518817] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.518838] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.518870] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.518875] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.518879] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.518884] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.518894] pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000)
[ 0.518909] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000)
[ 0.518922] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000)
[ 0.518932] pci 0000:00:1c.0: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.518941] pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff]
[ 0.518955] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000)
[ 0.518965] pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000)
[ 0.518977] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000)
[ 0.518984] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.518992] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.519007] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.519014] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.519023] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
[ 0.519035] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.519042] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.519051] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
[ 0.519063] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.519070] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.519079] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff]
[ 0.519091] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.519095] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.519099] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.519102] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.519106] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.519110] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.519114] pci_bus 0000:00: resource 10 [mem 0x80000000-0x909ffffe]
[ 0.519118] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.519122] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.519125] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff]
[ 0.519129] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.519133] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
[ 0.519137] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.519141] pci_bus 0000:04: resource 1 [mem 0x90400000-0x904fffff]
[ 0.519185] NET: Registered protocol family 2
[ 0.519498] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.519594] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.519742] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.519830] TCP: reno registered
[ 0.519842] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.519875] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.520007] NET: Registered protocol family 1
[ 0.520196] RPC: Registered named UNIX socket transport module.
[ 0.520204] RPC: Registered udp transport module.
[ 0.520208] RPC: Registered tcp transport module.
[ 0.520213] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.520235] pci 0000:00:02.0: Boot video device
[ 1.620701] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.620882] PCI: CLS 64 bytes, default 64
[ 1.620973] Trying to unpack rootfs image as initramfs...
[ 2.258768] Freeing initrd memory: 25324K (ffff880034e7a000 - ffff880036735000)
[ 2.258796] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.258804] software IO TLB [mem 0x711db000-0x751db000] (64MB) mapped at [ffff8800711db000-ffff8800751dafff]
[ 2.260866] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.260921] audit: initializing netlink subsys (disabled)
[ 2.260945] audit: type=2000 audit(1446482570.246:1): initialized
[ 2.264761] VFS: Disk quotas dquot_6.5.2
[ 2.264838] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.265944] NFS: Registering the id_resolver key type
[ 2.265969] Key type id_resolver registered
[ 2.265975] Key type id_legacy registered
[ 2.265993] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 2.266144] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2.268838] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 2.269728] msgmni has been set to 7656
[ 2.272707] async_tx: api initialized (async)
[ 2.272759] bounce: pool size: 64 pages
[ 2.272841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.272933] io scheduler noop registered
[ 2.272941] io scheduler deadline registered
[ 2.272995] io scheduler cfq registered (default)
[ 2.273356] pcieport 0000:00:1c.0: irq 103 for MSI/MSI-X
[ 2.273578] pcieport 0000:00:1c.1: irq 104 for MSI/MSI-X
[ 2.274022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.274107] efifb: probing for efifb
[ 2.274138] efifb: framebuffer at 0x80000000, mapped to 0xffffc90004680000, using 4160k, total 4160k
[ 2.274146] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 2.274151] efifb: scrolling: redraw
[ 2.274157] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.280834] Console: switching to colour frame buffer device 170x48
[ 2.286698] fb0: EFI VGA frame buffer device
[ 2.286758] intel_idle: MWAIT substates: 0x33000020
[ 2.286761] intel_idle: v0.4 model 0x37
[ 2.286763] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.287027] GHES: HEST is not enabled!
[ 2.292118] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.312448] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.313324] hpet: number irqs doesn't agree with number of timers
[ 2.316535] brd: module loaded
[ 2.316876] ahci 0000:00:13.0: version 3.0
[ 2.317065] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[ 2.317160] ahci 0000:00:13.0: irq 105 for MSI/MSI-X
[ 2.327292] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.327376] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
[ 2.328001] scsi0 : ahci
[ 2.328330] scsi1 : ahci
[ 2.328449] ata1: SATA max UDMA/133 abar m2048@0x90914000 port 0x90914100 irq 105
[ 2.328525] ata2: SATA max UDMA/133 abar m2048@0x90914000 port 0x90914180 irq 105
[ 2.330534] scsi2 : pata_legacy
[ 2.330653] ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 2.635533] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.636202] ata1.00: ATA-9: WDC WD5000LPCX-24C6HT0, 02.01A02, max UDMA/133
[ 2.636273] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.638095] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.640466] ata1.00: configured for UDMA/133
[ 2.642271] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
[ 2.646251] ata2.00: configured for UDMA/133
[ 3.262107] tsc: Refined TSC clocksource calibration: 2166.671 MHz
[ 4.265122] Switched to clocksource tsc
[ 5.327942] floppy0: no floppy controllers found
[ 5.330026] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A02 PQ: 0 ANSI: 5
[ 5.332190] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.334097] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.335970] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUC0N T.02 PQ: 0 ANSI: 5
[ 5.336062] sd 0:0:0:0: [sda] Write Protect is off
[ 5.336065] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.336108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.374007] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.375931] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.378096] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.428916] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 5.431722] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.434288] scsi3 : pata_legacy
[ 5.436299] ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 5.589403] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 5.597694] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.599692] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.601789] mousedev: PS/2 mouse device common for all mice
[ 5.603820] rtc_cmos 00:00: RTC can wake from S4
[ 5.605918] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 5.607862] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 5.609815] md: linear personality registered for level -1
[ 5.611750] md: raid0 personality registered for level 0
[ 5.613656] md: raid1 personality registered for level 1
[ 5.615525] md: raid10 personality registered for level 10
[ 5.617465] md: raid6 personality registered for level 6
[ 5.619313] md: raid5 personality registered for level 5
[ 5.621106] md: raid4 personality registered for level 4
[ 5.622876] md: multipath personality registered for level -4
[ 5.624750] device-mapper: uevent: version 1.0.3
[ 5.626670] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 5.628500] Intel P-state driver initializing.
[ 5.630355] Intel pstate controlling: cpu 0
[ 5.633880] Intel pstate controlling: cpu 1
[ 5.633931] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 5.639197] TCP: cubic registered
[ 5.641011] Initializing XFRM netlink socket
[ 5.642551] NET: Registered protocol family 17
[ 5.644083] Key type dns_resolver registered
[ 5.645994] registered taskstats version 1
[ 5.648321] Btrfs loaded
[ 5.651910] Freeing unused kernel memory: 1188K (ffffffff81cdc000 - ffffffff81e05000)
[ 5.653516] Write protecting the kernel read-only data: 12288k
[ 5.655750] Freeing unused kernel memory: 52K (ffff8800017f3000 - ffff880001800000)
[ 5.663909] Freeing unused kernel memory: 1576K (ffff880001a76000 - ffff880001c00000)
[ 5.687180] random: systemd-udevd urandom read with 22 bits of entropy available
[ 5.719751] Linux agpgart interface v0.103
[ 5.730485] rtsx_pci 0000:02:00.0: irq 106 for MSI/MSI-X
[ 5.730515] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 106
[ 5.730694] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.733169] sdhci: Secure Digital Host Controller Interface driver
[ 5.733170] sdhci: Copyright(c) Pierre Ossman
[ 5.736445] [drm] Initialized drm 1.1.0 20060810
[ 5.739016] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input2
[ 5.739455] r8169 0000:03:00.0: irq 107 for MSI/MSI-X
[ 5.739668] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90004672000, f0:76:1c:af:43:da, XID 10900800 IRQ 107
[ 5.739670] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.744006] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.746410] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.748440] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.750336] ACPI: Lid Switch [LID0]
[ 5.752313] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.754146] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 5.755995] ACPI: Power Button [PWRB]
[ 5.758158] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 5.758189] xhci_hcd 0000:00:14.0: irq 108 for MSI/MSI-X
[ 5.758377] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.760057] ACPI: Power Button [PWRF]
[ 5.761943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.763679] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.764669] ACPI: Fan [FAN0] (off)
[ 5.767290] usb usb1: Product: xHCI Host Controller
[ 5.769205] usb usb1: Manufacturer: Linux 3.16.0 xhci_hcd
[ 5.771114] usb usb1: SerialNumber: 0000:00:14.0
[ 5.777812] [Firmware Bug]: No valid trip found
[ 5.779785] hub 1-0:1.0: USB hub found
[ 5.782272] hub 1-0:1.0: 6 ports detected
[ 5.785369] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.787501] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 5.789463] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.791316] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.793037] usb usb2: Product: xHCI Host Controller
[ 5.794964] usb usb2: Manufacturer: Linux 3.16.0 xhci_hcd
[ 5.798093] usb usb2: SerialNumber: 0000:00:14.0
[ 5.801380] hub 2-0:1.0: USB hub found
[ 5.804280] hub 2-0:1.0: 1 port detected
[ 5.809323] [drm] Memory usable by graphics device = 2048M
[ 5.811016] [drm] Replacing VGA console driver
[ 5.812674] checking generic (80000000 410000) vs hw (80000000 10000000)
[ 5.812678] fb: switching to inteldrmfb from EFI VGA
[ 5.815433] Console: switching to colour dummy device 80x25
[ 5.818205] i915 0000:00:02.0: irq 109 for MSI/MSI-X
[ 5.818221] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.818230] [drm] Driver supports precise vblank timestamp query.
[ 5.854504] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.882516] [drm] VBT doesn't support DRRS
[ 6.006272] fbcon: inteldrmfb (fb0) is primary device
[ 6.138505] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 6.276800] random: nonblocking pool is initialized
[ 6.302924] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
[ 6.302936] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.302945] usb 1-4: Product: USB 2.0 Hub
[ 6.304428] hub 1-4:1.0: USB hub found
[ 6.304768] hub 1-4:1.0: 4 ports detected
[ 6.305681] usb: failed to peer 1-4-port1 and usb2-port1 by location (1-4-port1:none) (usb2-port1:usb1-port1)
[ 6.305693] usb 1-4-port1: failed to peer to usb2-port1 (-16)
[ 6.305696] usb: port power management may be unreliable
[ 6.306190] usb: failed to peer 1-4-port2 and usb2-port1 by location (1-4-port2:none) (usb2-port1:usb1-port1)
[ 6.306200] usb 1-4-port2: failed to peer to usb2-port1 (-16)
[ 6.306903] usb: failed to peer 1-4-port3 and usb2-port1 by location (1-4-port3:none) (usb2-port1:usb1-port1)
[ 6.306913] usb 1-4-port3: failed to peer to usb2-port1 (-16)
[ 6.307413] usb: failed to peer 1-4-port4 and usb2-port1 by location (1-4-port4:none) (usb2-port1:usb1-port1)
[ 6.307422] usb 1-4-port4: failed to peer to usb2-port1 (-16)
[ 6.580856] usb 1-4.3: new high-speed USB device number 3 using xhci_hcd
[ 6.634065] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
[ 6.675280] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 6.725203] usb 1-4.3: New USB device found, idVendor=0bda, idProduct=579c
[ 6.725214] usb 1-4.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 6.725223] usb 1-4.3: Product: Lenovo EasyCamera
[ 6.725231] usb 1-4.3: Manufacturer: CKZF36CBH
[ 6.725239] usb 1-4.3: SerialNumber: 200901010001
[ 6.805032] usb 1-4.4: new full-speed USB device number 4 using xhci_hcd
[ 6.889401] usb 1-4.4: No LPM exit latency info found, disabling LPM.
[ 6.890662] usb 1-4.4: New USB device found, idVendor=0bda, idProduct=b728
[ 6.890670] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.890676] usb 1-4.4: Product: Bluetooth Radio
[ 6.890681] usb 1-4.4: Manufacturer: Realtek
[ 6.890687] usb 1-4.4: SerialNumber: 00e04c000001
[ 7.199262] Console: switching to colour frame buffer device 170x48
[ 7.242180] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.245030] i915 0000:00:02.0: registered panic notifier
[ 7.254497] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.257404] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 7.260331] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.721688] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 8.056468] BTRFS: device fsid e0990b04-6ad0-40b8-b030-329873b8ff31 devid 1 transid 955 /dev/mapper/RICKY-root
[ 8.057548] BTRFS: device fsid 104f1a0c-aabe-4961-8fce-8986867e151b devid 1 transid 685 /dev/mapper/RICKY-home
[ 8.086905] BTRFS info (device dm-2): disk space caching is enabled
[ 9.050994] systemd[1]: Inserted module 'autofs4'
[ 9.096461] NET: Registered protocol family 10
[ 9.097343] systemd[1]: Inserted module 'ipv6'
[ 9.275020] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 9.276544] systemd[1]: Detected architecture x86-64.
[ 9.293841] systemd[1]: Set hostname to <villa>.
[ 11.335101] systemd[1]: Created slice Root Slice.
[ 11.335156] systemd[1]: Starting Root Slice.
[ 11.335527] systemd[1]: Reached target Remote File Systems (Pre).
[ 11.335566] systemd[1]: Starting Remote File Systems (Pre).
[ 11.335780] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.335821] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.343041] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 11.343086] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 11.343565] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 11.343649] systemd[1]: Starting fsck to fsckd communication Socket.
[ 11.344115] systemd[1]: Listening on udev Control Socket.
[ 11.344161] systemd[1]: Starting udev Control Socket.
[ 11.344550] systemd[1]: Listening on Journal Socket.
[ 11.344638] systemd[1]: Starting Journal Socket.
[ 11.344983] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.345024] systemd[1]: Starting Journal Socket (/dev/log).
[ 11.345449] systemd[1]: Reached target Encrypted Volumes.
[ 11.345491] systemd[1]: Starting Encrypted Volumes.
[ 11.352020] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 11.352059] systemd[1]: Starting LVM2 metadata daemon socket.
[ 11.369236] systemd[1]: Listening on Journal Audit Socket.
[ 11.369272] systemd[1]: Starting Journal Audit Socket.
[ 11.384513] systemd[1]: Listening on udev Kernel Socket.
[ 11.384543] systemd[1]: Starting udev Kernel Socket.
[ 11.398095] systemd[1]: Created slice User and Session Slice.
[ 11.398124] systemd[1]: Starting User and Session Slice.
[ 11.410827] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.410864] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.422824] systemd[1]: Created slice System Slice.
[ 11.422870] systemd[1]: Starting System Slice.
[ 11.429769] systemd[1]: Started Read required files in advance.
[ 11.430418] systemd[1]: Starting Read required files in advance...
[ 11.440816] systemd[1]: Starting Increase datagram queue length...
[ 11.450260] systemd[1]: Started Braille Device Support.
[ 11.450733] systemd[1]: Starting Braille Device Support...
[ 11.457486] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 11.464549] systemd[1]: Reached target Slices.
[ 11.467984] systemd[1]: Starting Slices.
[ 11.472365] systemd[1]: Created slice system-getty.slice.
[ 11.472386] systemd[1]: Starting system-getty.slice.
[ 11.472519] systemd[1]: Mounted Huge Pages File System.
[ 11.473765] systemd[1]: Starting Uncomplicated firewall...
[ 11.482754] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.487161] systemd[1]: Starting Setup Virtual Console...
[ 11.655014] systemd[1]: Starting Load Kernel Modules...
[ 11.695371] systemd[1]: Started Set Up Additional Binary Formats.
[ 11.701333] systemd[1]: Mounting Debug File System...
[ 11.707089] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 11.718638] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 11.722387] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 11.727184] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.727230] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.728734] systemd[1]: Starting Nameserver information manager...
[ 11.739537] systemd[1]: Starting udev Coldplug all Devices...
[ 11.744136] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.744174] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.749878] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 11.753413] systemd[1]: Started Uncomplicated firewall.
[ 11.758550] systemd[1]: Started Setup Virtual Console.
[ 11.769904] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 11.914507] systemd[1]: Started udev Coldplug all Devices.
[ 11.916123] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 11.954407] lp: driver loaded but no devices found
[ 11.969166] ppdev: user-space parallel port driver
[ 12.048608] fuse init (API version 7.23)
[ 12.061104] systemd[1]: Started Load Kernel Modules.
[ 12.066380] systemd[1]: Starting Apply Kernel Variables...
[ 12.069714] systemd[1]: Mounting FUSE Control File System...
[ 12.073625] systemd[1]: Mounting Configuration File System...
[ 12.177151] systemd[1]: Mounted FUSE Control File System.
[ 12.180122] systemd[1]: Mounted Configuration File System.
[ 12.183678] systemd[1]: Mounted Debug File System.
[ 12.187114] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.192998] systemd[1]: Started Increase datagram queue length.
[ 12.225623] systemd[1]: Listening on Syslog Socket.
[ 12.225655] systemd[1]: Starting Syslog Socket.
[ 12.227299] systemd[1]: Starting Journal Service...
[ 12.293514] systemd[1]: Started Nameserver information manager.
[ 12.722188] systemd[1]: Started Create Static Device Nodes in /dev.
[ 12.731548] systemd[1]: Starting udev Kernel Device Manager...
[ 13.346300] systemd[1]: Started Apply Kernel Variables.
[ 14.870777] systemd[1]: Started Journal Service.
[ 22.766406] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.741000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 24.335584] ehci-pci: EHCI PCI platform driver
[ 24.336420] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 24.337903] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 24.337974] ehci-pci 0000:00:1d.0: debug port 2
[ 24.341938] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 24.342036] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90915000
[ 24.347320] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 24.347691] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 24.347713] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 24.347730] usb usb3: Product: EHCI Host Controller
[ 24.347745] usb usb3: Manufacturer: Linux 3.16.0 ehci_hcd
[ 24.347760] usb usb3: SerialNumber: 0000:00:1d.0
[ 24.353508] hub 3-0:1.0: USB hub found
[ 24.353595] hub 3-0:1.0: 8 ports detected
[ 24.427754] hidraw: raw HID events driver (C) Jiri Kosina
[ 24.587119] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 24.587217] ACPI: AC Adapter [ACAD] (on-line)
[ 24.637549] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 24.637562] ACPI: Battery Slot [BAT1] (battery present)
[ 24.668696] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 24.734763] Linux video capture interface: v2.00
[ 24.784229] usb 3-1: New USB device found, idVendor=8087, idProduct=07e6
[ 24.784236] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 24.785115] hub 3-1:1.0: USB hub found
[ 24.785278] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7
[ 24.785326] hub 3-1:1.0: 4 ports detected
[ 24.916697] Bluetooth: Core ver 2.19
[ 24.916727] NET: Registered protocol family 31
[ 24.916730] Bluetooth: HCI device and connection manager initialized
[ 24.916741] Bluetooth: HCI socket layer initialized
[ 24.916748] Bluetooth: L2CAP socket layer initialized
[ 24.916760] Bluetooth: SCO socket layer initialized
[ 25.292898] usbcore: registered new interface driver btusb
[ 25.486809] snd_hda_intel 0000:00:1b.0: irq 110 for MSI/MSI-X
[ 25.619060] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579c)
[ 25.626155] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/input/input8
[ 25.626671] usbcore: registered new interface driver uvcvideo
[ 25.626675] USB Video Class driver (1.1.1)
[ 25.811600] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 25.811628] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 25.811648] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 25.811662] sound hdaudioC0D0: mono: mono_out=0x0
[ 25.811675] sound hdaudioC0D0: inputs:
[ 25.811693] sound hdaudioC0D0: Mic=0x19
[ 25.811709] sound hdaudioC0D0: Internal Mic=0x12
[ 26.027078] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 26.027695] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 26.028234] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 26.286675] Adding 4194300k swap on /dev/mapper/RICKY-swap1. Priority:-1 extents:1 across:4194300k
[ 26.324569] Adding 4194300k swap on /dev/mapper/RICKY-swap2. Priority:-2 extents:1 across:4194300k
[ 28.707896] BTRFS info (device dm-2): disk space caching is enabled
[ 28.805269] systemd-journald[355]: Received request to flush runtime journal from PID 1
[ 28.901735] BTRFS info (device dm-3): disk space caching is enabled
[ 30.834004] cgroup: new mount options do not match the existing superblock, will be ignored
[ 31.423295] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.423302] Bluetooth: BNEP filters: protocol multicast
[ 31.423316] Bluetooth: BNEP socket layer initialized
[ 31.547574] Bluetooth: RFCOMM TTY layer initialized
[ 31.547597] Bluetooth: RFCOMM socket layer initialized
[ 31.547613] Bluetooth: RFCOMM ver 1.11
[ 32.470850] cfg80211: Calling CRDA to update world regulatory domain
[ 32.478838] cfg80211: World regulatory domain updated:
[ 32.478845] cfg80211: DFS Master region: unset
[ 32.478847] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 32.478851] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.478854] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.478857] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.478860] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 32.478864] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 32.478867] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 32.478869] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 32.478872] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 32.899316] r8169 0000:03:00.0 eth0: link down
[ 32.899327] r8169 0000:03:00.0 eth0: link down
[ 32.899387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.487526] r8169 0000:03:00.0 eth0: link up
[ 34.487553] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0 (root@hp250) (gcc version 4.8.4 (GCC) ) #6 SMP PREEMPT Mon Nov 2 17:47:13 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-generic root=/dev/mapper/RICKY-root ro rootflags=subvol=@ noquiet nosplash reboot=force,cold
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000751dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000751db000-0x00000000751defff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000751df000-0x00000000781defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000781df000-0x000000007826efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007826f000-0x0000000078aeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078aef000-0x0000000078beefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000078bef000-0x0000000078c2efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000078c2f000-0x00000000796f0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000796f1000-0x0000000079ff0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079ff1000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x78c2e014 SMBIOS=0x78aee000
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[ 0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[ 0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem07: type=10, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem09: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem10: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
[ 0.000000] efi: mem12: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002239000) (18MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000002239000-0x000000001f000000) (461MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x000000001f000000-0x000000001f100000) (1MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000001f100000-0x0000000020000000) (15MB)
[ 0.000000] efi: mem17: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000020100000-0x0000000034e88000) (333MB)
[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x0000000034e88000-0x000000003673c000) (24MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000003673c000-0x00000000528f0000) (449MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x00000000528f0000-0x0000000070000000) (471MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x0000000070000000-0x0000000070020000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x0000000070020000-0x00000000750f1000) (80MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000750f1000-0x00000000751db000) (0MB)
[ 0.000000] efi: mem25: type=6, attr=0x800000000000000f, range=[0x00000000751db000-0x00000000751df000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000751df000-0x00000000751f3000) (0MB)
[ 0.000000] efi: mem27: type=2, attr=0xf, range=[0x00000000751f3000-0x00000000752df000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000752df000-0x00000000753b9000) (0MB)
[ 0.000000] efi: mem29: type=1, attr=0xf, range=[0x00000000753b9000-0x00000000754df000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000754df000-0x000000007611e000) (12MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000007611e000-0x00000000779df000) (24MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000779df000-0x0000000077e7e000) (4MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x0000000077e7e000-0x0000000077e88000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x0000000077e88000-0x00000000781df000) (3MB)
[ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000781df000-0x000000007826f000) (0MB)
[ 0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x000000007826f000-0x00000000784ef000) (2MB)
[ 0.000000] efi: mem37: type=0, attr=0xf, range=[0x00000000784ef000-0x0000000078aef000) (6MB)
[ 0.000000] efi: mem38: type=10, attr=0xf, range=[0x0000000078aef000-0x0000000078bef000) (1MB)
[ 0.000000] efi: mem39: type=9, attr=0xf, range=[0x0000000078bef000-0x0000000078c2f000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x0000000078c2f000-0x00000000796f1000) (10MB)
[ 0.000000] efi: mem41: type=10, attr=0xf, range=[0x00000000796f1000-0x0000000079ff1000) (9MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x0000000079ff1000-0x000000007a000000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000100000000-0x0000000180000000) (2048MB)
[ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem45: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 80ES/Lenovo B50-30, BIOS 9CCN30WW(V2.08) 11/26/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 3 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 4 base 07AE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000024000] 24000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ede000, 0x01edefff] PGTABLE
[ 0.000000] BRK [0x01edf000, 0x01edffff] PGTABLE
[ 0.000000] BRK [0x01ee0000, 0x01ee0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 2M
[ 0.000000] BRK [0x01ee1000, 0x01ee1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[ 0.000000] [mem 0x100000000-0x17bffffff] page 2M
[ 0.000000] BRK [0x01ee2000, 0x01ee2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[ 0.000000] [mem 0x1f100000-0x1f1fffff] page 4k
[ 0.000000] [mem 0x1f200000-0x1fffffff] page 2M
[ 0.000000] BRK [0x01ee3000, 0x01ee3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x751dafff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0x74ffffff] page 2M
[ 0.000000] [mem 0x75000000-0x751dafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x751df000-0x781defff]
[ 0.000000] [mem 0x751df000-0x751fffff] page 4k
[ 0.000000] [mem 0x75200000-0x77ffffff] page 2M
[ 0.000000] [mem 0x78000000-0x781defff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x78c2f000-0x796f0fff]
[ 0.000000] [mem 0x78c2f000-0x78dfffff] page 4k
[ 0.000000] [mem 0x78e00000-0x795fffff] page 2M
[ 0.000000] [mem 0x79600000-0x796f0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79ff1000-0x79ffffff]
[ 0.000000] [mem 0x79ff1000-0x79ffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x34e88000-0x3673bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000078C2E014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x0000000078C2E120 00008C (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000078C2B000 0000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000078C19000 00C0AA (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000078BB8000 000040
[ 0.000000] ACPI: LPIT 0x0000000078C29000 000104 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000078C27000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000078C17000 000290 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000078C2D000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000078C28000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000078C18000 000763 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000078C16000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000078C2A000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000078C15000 00017A (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000078C14000 0003E6 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000078C13000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000078C26000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff88017b600000-ffff88017f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1effffff]
[ 0.000000] node 0: [mem 0x1f100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0x751dafff]
[ 0.000000] node 0: [mem 0x751df000-0x781defff]
[ 0.000000] node 0: [mem 0x78c2f000-0x796f0fff]
[ 0.000000] node 0: [mem 0x79ff1000-0x79ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1018418
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1135 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7659 pages used for memmap
[ 0.000000] DMA32 zone: 490156 pages, LIFO batch:31
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 103
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x751db000-0x751defff]
[ 0.000000] PM: Registered nosave memory: [mem 0x781df000-0x7826efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7826f000-0x78aeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78aef000-0x78beefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78bef000-0x78c2efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x796f1000-0x79ff0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a000000-0x7affffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7effffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f000000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88017fc00000 s79744 r8192 d22656 u524288
[ 0.000000] pcpu-alloc: s79744 r8192 d22656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1001368
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-generic root=/dev/mapper/RICKY-root ro rootflags=subvol=@ noquiet nosplash reboot=force,cold
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3850172K/4073672K available (8167K kernel code, 876K rwdata, 2524K rodata, 1188K init, 824K bss, 223500K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 2163200 KHz
[ 0.000000] lapic_timer_frequency = 83200
[ 0.000000] tsc: Detected 2163.200 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.40 BogoMIPS (lpj=2163200)
[ 0.000016] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20140424
[ 0.022518] ACPI: All ACPI Tables successfully acquired
[ 0.029250] Security Framework initialized
[ 0.029281] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.029290] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.029629] Initializing cgroup subsys devices
[ 0.029646] Initializing cgroup subsys freezer
[ 0.029656] Initializing cgroup subsys net_cls
[ 0.029667] Initializing cgroup subsys blkio
[ 0.029678] Initializing cgroup subsys perf_event
[ 0.029709] CPU: Physical Processor ID: 0
[ 0.029715] CPU: Processor Core ID: 0
[ 0.029722] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.034513] mce: CPU supports 6 MCE banks
[ 0.034525] CPU0: Thermal monitoring handled by SMI
[ 0.034534] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
tlb_flushall_shift: 6
[ 0.034661] Freeing SMP alternatives memory: 32K (ffffffff81e06000 - ffffffff81e0e000)
[ 0.037815] ftrace: allocating 28987 entries in 114 pages
[ 0.054683] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064689] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
[ 0.064721] TSC deadline timer enabled
[ 0.064755] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.064778] ... version: 3
[ 0.064783] ... bit width: 40
[ 0.064787] ... generic registers: 2
[ 0.064792] ... value mask: 000000ffffffffff
[ 0.064797] ... max period: 000000ffffffffff
[ 0.064801] ... fixed-purpose events: 3
[ 0.064806] ... event mask: 0000000700000003
[ 0.070862] x86: Booting SMP configuration:
[ 0.070870] .... node #0, CPUs: #1
[ 0.086647] CPU1: Thermal monitoring handled by SMI
[ 0.088750] x86: Booted up 1 node, 2 CPUs
[ 0.088762] smpboot: Total of 2 processors activated (8652.80 BogoMIPS)
[ 0.089257] devtmpfs: initialized
[ 0.096200] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
[ 0.096210] PM: Registering ACPI NVS region [mem 0x78aef000-0x78beefff] (1048576 bytes)
[ 0.096249] PM: Registering ACPI NVS region [mem 0x796f1000-0x79ff0fff] (9437184 bytes)
[ 0.096991] xor: measuring software checksum speed
[ 0.106744] prefetch64-sse: 7264.000 MB/sec
[ 0.116754] generic_sse: 6548.000 MB/sec
[ 0.116763] xor: using function: prefetch64-sse (7264.000 MB/sec)
[ 0.116778] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.116786] pinctrl core: initialized pinctrl subsystem
[ 0.116930] regulator-dummy: no parameters
[ 0.117049] NET: Registered protocol family 16
[ 0.117241] cpuidle: using governor ladder
[ 0.117249] cpuidle: using governor menu
[ 0.117316] ACPI: bus type PCI registered
[ 0.117323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.117451] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.117461] PCI: not using MMCONFIG
[ 0.117467] PCI: Using configuration type 1 for base access
[ 0.139818] raid6: sse2x1 761 MB/s
[ 0.156887] raid6: sse2x2 769 MB/s
[ 0.173845] raid6: sse2x4 1179 MB/s
[ 0.173851] raid6: using algorithm sse2x4 (1179 MB/s)
[ 0.173857] raid6: using ssse3x2 recovery algorithm
[ 0.173954] ACPI: Added _OSI(Module Device)
[ 0.173961] ACPI: Added _OSI(Processor Device)
[ 0.173967] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.173972] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.193055] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.193796] ACPI: Dynamic OEM Table Load:
[ 0.193813] ACPI: SSDT 0xFFFF88017B0CD800 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20121220)
[ 0.195155] ACPI: Dynamic OEM Table Load:
[ 0.195170] ACPI: SSDT 0xFFFF88017B0CE000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.199396] ACPI: Dynamic OEM Table Load:
[ 0.199410] ACPI: SSDT 0xFFFF88017B225800 00015F (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.203073] ACPI: Dynamic OEM Table Load:
[ 0.203087] ACPI: SSDT 0xFFFF88017B093D80 00008D (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.208162] ACPI: Interpreter enabled
[ 0.208178] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.208193] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.208229] ACPI: (supports S0 S3 S4 S5)
[ 0.208235] ACPI: Using IOAPIC for interrupt routing
[ 0.208281] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.209196] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.209346] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.303482] ACPI: Power Resource [USBC] (on)
[ 0.311387] ACPI: Power Resource [PLPE] (on)
[ 0.311701] ACPI: Power Resource [PLPE] (on)
[ 0.320431] ACPI: Power Resource [CLK0] (on)
[ 0.320518] ACPI: Power Resource [CLK1] (on)
[ 0.388780] ACPI: Power Resource [FN00] (off)
[ 0.389969] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.389984] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.396573] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.396981] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[ 0.397482] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.397813] PCI host bridge to bus 0000:00
[ 0.397823] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.397830] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.397837] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.397844] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.397851] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.397859] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.397866] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.397873] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe]
[ 0.397888] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.398047] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.398064] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.398078] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.398090] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057]
[ 0.398274] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[ 0.398297] pci 0000:00:13.0: reg 0x10: [io 0x3048-0x304f]
[ 0.398309] pci 0000:00:13.0: reg 0x14: [io 0x305c-0x305f]
[ 0.398320] pci 0000:00:13.0: reg 0x18: [io 0x3040-0x3047]
[ 0.398331] pci 0000:00:13.0: reg 0x1c: [io 0x3058-0x305b]
[ 0.398342] pci 0000:00:13.0: reg 0x20: [io 0x3020-0x303f]
[ 0.398353] pci 0000:00:13.0: reg 0x24: [mem 0x90914000-0x909147ff]
[ 0.398404] pci 0000:00:13.0: PME# supported from D3hot
[ 0.398547] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.398570] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
[ 0.398633] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.398735] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.398825] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.398854] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
[ 0.398870] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
[ 0.398977] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.399120] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.399146] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
[ 0.399222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.399365] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.399434] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.399510] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.399586] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.399654] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.399730] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.399809] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.399877] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.399956] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.400033] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ 0.400101] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.400177] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.400272] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
[ 0.400303] pci 0000:00:1d.0: reg 0x10: [mem 0x90915000-0x909153ff]
[ 0.400427] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.400536] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.400613] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.400817] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.400855] pci 0000:00:1f.3: reg 0x10: [mem 0x90916000-0x9091601f]
[ 0.400929] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
[ 0.401222] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.401392] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.401443] pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x90600fff]
[ 0.401594] pci 0000:02:00.0: supports D1 D2
[ 0.401598] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 0.401648] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.403293] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.403305] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
[ 0.403436] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.403472] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.403507] pci 0000:03:00.0: reg 0x18: [mem 0x90504000-0x90504fff 64bit]
[ 0.403531] pci 0000:03:00.0: reg 0x20: [mem 0x90500000-0x90503fff 64bit]
[ 0.403646] pci 0000:03:00.0: supports D1 D2
[ 0.403650] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.403750] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.405279] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.405289] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.405295] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
[ 0.405409] pci 0000:04:00.0: [10ec:b723] type 00 class 0x028000
[ 0.405434] pci 0000:04:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.405469] pci 0000:04:00.0: reg 0x18: [mem 0x90400000-0x90403fff 64bit]
[ 0.405585] pci 0000:04:00.0: supports D1 D2
[ 0.405589] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.405631] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.407271] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.407281] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.407287] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff]
[ 0.407337] pci_bus 0000:00: on NUMA node 0
[ 0.450989] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.451131] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.451270] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.451416] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.451553] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.451694] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.451836] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.451975] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.454147] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.454373] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.454562] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.454575] vgaarb: loaded
[ 0.454579] vgaarb: bridge control possible 0000:00:02.0
[ 0.454711] SCSI subsystem initialized
[ 0.454800] libata version 3.00 loaded.
[ 0.454814] ACPI: bus type USB registered
[ 0.454866] usbcore: registered new interface driver usbfs
[ 0.454892] usbcore: registered new interface driver hub
[ 0.454952] usbcore: registered new device driver usb
[ 0.455173] PCI: Using ACPI for IRQ routing
[ 0.456601] PCI: pci_cache_line_size set to 64 bytes
[ 0.456684] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.456688] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.456692] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[ 0.456694] e820: reserve RAM buffer [mem 0x751db000-0x77ffffff]
[ 0.456698] e820: reserve RAM buffer [mem 0x781df000-0x7bffffff]
[ 0.456701] e820: reserve RAM buffer [mem 0x796f1000-0x7bffffff]
[ 0.456704] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.456987] Switched to clocksource refined-jiffies
[ 0.467271] pnp: PnP ACPI init
[ 0.467310] ACPI: bus type PNP registered
[ 0.467397] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.467554] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.467563] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.467571] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.467579] system 00:01: [io 0xfd40-0xfd7f] has been reserved
[ 0.467587] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.467596] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.467786] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.467858] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.468012] pnp 00:04: Plug and Play ACPI device, IDs SYN2b38 PNP0f13 (active)
[ 0.511227] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.511237] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.511245] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.511253] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.511260] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
[ 0.511268] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.511276] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.511283] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.511291] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.511300] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.513338] pnp: PnP ACPI: found 6 devices
[ 0.513345] ACPI: bus type PNP unregistered
[ 0.521742] Switched to clocksource acpi_pm
[ 0.521768] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.521775] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.521780] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.521790] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.521795] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.521816] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.521849] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.521854] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.521859] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.521863] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.521874] pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000)
[ 0.521888] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000)
[ 0.521901] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000)
[ 0.521910] pci 0000:00:1c.0: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.521919] pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff]
[ 0.521933] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000)
[ 0.521943] pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000)
[ 0.521955] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000)
[ 0.521963] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.521971] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.521985] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.521993] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.522002] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
[ 0.522014] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.522021] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.522031] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
[ 0.522043] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.522050] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.522059] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff]
[ 0.522072] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.522076] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.522080] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.522083] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.522087] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.522091] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.522095] pci_bus 0000:00: resource 10 [mem 0x80000000-0x909ffffe]
[ 0.522099] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.522103] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.522107] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff]
[ 0.522110] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.522114] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
[ 0.522118] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.522122] pci_bus 0000:04: resource 1 [mem 0x90400000-0x904fffff]
[ 0.522167] NET: Registered protocol family 2
[ 0.522479] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.522575] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.522723] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.522809] TCP: reno registered
[ 0.522822] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.522855] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.522988] NET: Registered protocol family 1
[ 0.523173] RPC: Registered named UNIX socket transport module.
[ 0.523180] RPC: Registered udp transport module.
[ 0.523185] RPC: Registered tcp transport module.
[ 0.523190] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.523212] pci 0000:00:02.0: Boot video device
[ 1.623677] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.623860] PCI: CLS 64 bytes, default 64
[ 1.623950] Trying to unpack rootfs image as initramfs...
[ 2.261323] Freeing initrd memory: 25296K (ffff880034e88000 - ffff88003673c000)
[ 2.261349] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.261357] software IO TLB [mem 0x711db000-0x751db000] (64MB) mapped at [ffff8800711db000-ffff8800751dafff]
[ 2.263406] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.263464] audit: initializing netlink subsys (disabled)
[ 2.263487] audit: type=2000 audit(1446484724.247:1): initialized
[ 2.267245] VFS: Disk quotas dquot_6.5.2
[ 2.267324] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.268420] NFS: Registering the id_resolver key type
[ 2.268445] Key type id_resolver registered
[ 2.268451] Key type id_legacy registered
[ 2.268471] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 2.268622] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2.271309] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 2.272195] msgmni has been set to 7656
[ 2.275041] async_tx: api initialized (async)
[ 2.275092] bounce: pool size: 64 pages
[ 2.275207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.275294] io scheduler noop registered
[ 2.275302] io scheduler deadline registered
[ 2.275359] io scheduler cfq registered (default)
[ 2.275682] pcieport 0000:00:1c.0: irq 103 for MSI/MSI-X
[ 2.275902] pcieport 0000:00:1c.1: irq 104 for MSI/MSI-X
[ 2.276397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.276484] efifb: probing for efifb
[ 2.276514] efifb: framebuffer at 0x80000000, mapped to 0xffffc90004680000, using 4160k, total 4160k
[ 2.276523] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 2.276528] efifb: scrolling: redraw
[ 2.276533] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.283173] Console: switching to colour frame buffer device 170x48
[ 2.289009] fb0: EFI VGA frame buffer device
[ 2.289070] intel_idle: MWAIT substates: 0x33000020
[ 2.289073] intel_idle: v0.4 model 0x37
[ 2.289075] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.289358] GHES: HEST is not enabled!
[ 2.294419] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.314729] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.315616] hpet: number irqs doesn't agree with number of timers
[ 2.318802] brd: module loaded
[ 2.319138] ahci 0000:00:13.0: version 3.0
[ 2.319353] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[ 2.319449] ahci 0000:00:13.0: irq 105 for MSI/MSI-X
[ 2.330267] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.330350] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
[ 2.330967] scsi0 : ahci
[ 2.331275] scsi1 : ahci
[ 2.331394] ata1: SATA max UDMA/133 abar m2048@0x90914000 port 0x90914100 irq 105
[ 2.331470] ata2: SATA max UDMA/133 abar m2048@0x90914000 port 0x90914180 irq 105
[ 2.333466] scsi2 : pata_legacy
[ 2.333583] ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 2.638512] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.639285] ata1.00: ATA-9: WDC WD5000LPCX-24C6HT0, 02.01A02, max UDMA/133
[ 2.639604] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.641515] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.643988] ata1.00: configured for UDMA/133
[ 2.645795] ata2.00: ATAPI: HL-DT-ST DVDRAM GUC0N, T.02, max UDMA/133
[ 2.649746] ata2.00: configured for UDMA/133
[ 3.264108] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[ 4.267099] Switched to clocksource tsc
[ 5.329932] floppy0: no floppy controllers found
[ 5.331829] work still pending
[ 5.333616] floppy0: floppy_shutdown: timeout handler died.
[ 5.335700] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A02 PQ: 0 ANSI: 5
[ 5.337856] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.339773] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.341731] sd 0:0:0:0: [sda] Write Protect is off
[ 5.342484] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUC0N T.02 PQ: 0 ANSI: 5
[ 5.345395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.345442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.371870] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.373956] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.376118] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.460126] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 5.462955] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.465492] scsi3 : pata_legacy
[ 5.467460] ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 5.620438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.622356] ehci-pci: EHCI PCI platform driver
[ 5.624487] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 5.626465] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.628393] ehci-pci 0000:00:1d.0: debug port 2
[ 5.634191] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 5.634218] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90915000
[ 5.641927] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 5.643857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.645721] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.647581] usb usb1: Product: EHCI Host Controller
[ 5.649417] usb usb1: Manufacturer: Linux 3.16.0 ehci_hcd
[ 5.651241] usb usb1: SerialNumber: 0000:00:1d.0
[ 5.653251] hub 1-0:1.0: USB hub found
[ 5.655038] hub 1-0:1.0: 8 ports detected
[ 5.657327] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 5.665020] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.666928] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.668928] mousedev: PS/2 mouse device common for all mice
[ 5.670838] rtc_cmos 00:00: RTC can wake from S4
[ 5.672822] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 5.674652] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 5.676477] md: linear personality registered for level -1
[ 5.678277] md: raid0 personality registered for level 0
[ 5.680055] md: raid1 personality registered for level 1
[ 5.681810] md: raid10 personality registered for level 10
[ 5.683640] md: raid6 personality registered for level 6
[ 5.685372] md: raid5 personality registered for level 5
[ 5.687052] md: raid4 personality registered for level 4
[ 5.688718] md: multipath personality registered for level -4
[ 5.690512] device-mapper: uevent: version 1.0.3
[ 5.692333] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 5.694044] Intel P-state driver initializing.
[ 5.695727] Intel pstate controlling: cpu 0
[ 5.699206] Intel pstate controlling: cpu 1
[ 5.699261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 5.703984] TCP: cubic registered
[ 5.705626] Initializing XFRM netlink socket
[ 5.707001] NET: Registered protocol family 17
[ 5.708371] Key type dns_resolver registered
[ 5.710149] registered taskstats version 1
[ 5.712314] Btrfs loaded
[ 5.716048] Freeing unused kernel memory: 1188K (ffffffff81cdd000 - ffffffff81e06000)
[ 5.717682] Write protecting the kernel read-only data: 12288k
[ 5.719564] Freeing unused kernel memory: 12K (ffff8800017fd000 - ffff880001800000)
[ 5.727830] Freeing unused kernel memory: 1572K (ffff880001a77000 - ffff880001c00000)
[ 5.750755] random: systemd-udevd urandom read with 22 bits of entropy available
[ 5.784513] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.789327] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 5.791058] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input2
[ 5.791706] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 5.791733] xhci_hcd 0000:00:14.0: irq 106 for MSI/MSI-X
[ 5.791845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.791847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.791849] usb usb2: Product: xHCI Host Controller
[ 5.791851] usb usb2: Manufacturer: Linux 3.16.0 xhci_hcd
[ 5.791853] usb usb2: SerialNumber: 0000:00:14.0
[ 5.792761] hub 2-0:1.0: USB hub found
[ 5.792777] hub 2-0:1.0: 6 ports detected
[ 5.793534] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.793596] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 5.793670] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.793672] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.793674] usb usb3: Product: xHCI Host Controller
[ 5.793676] usb usb3: Manufacturer: Linux 3.16.0 xhci_hcd
[ 5.793677] usb usb3: SerialNumber: 0000:00:14.0
[ 5.793858] hub 3-0:1.0: USB hub found
[ 5.793870] hub 3-0:1.0: 1 port detected
[ 5.796838] sdhci: Secure Digital Host Controller Interface driver
[ 5.796839] sdhci: Copyright(c) Pierre Ossman
[ 5.819283] ACPI: Lid Switch [LID0]
[ 5.820951] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.822550] ACPI: Power Button [PWRB]
[ 5.824246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.826390] Linux agpgart interface v0.103
[ 5.828807] ACPI: Fan [FAN0] (off)
[ 5.831243] [drm] Initialized drm 1.1.0 20060810
[ 5.831992] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.832048] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.835956] ACPI: Power Button [PWRF]
[ 5.835976] rtsx_pci 0000:02:00.0: irq 107 for MSI/MSI-X
[ 5.836006] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 107
[ 5.837546] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.839837] r8169 0000:03:00.0: irq 108 for MSI/MSI-X
[ 5.840056] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc9000005e000, f0:76:1c:af:43:da, XID 10900800 IRQ 108
[ 5.840059] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.845345] [Firmware Bug]: No valid trip found
[ 5.854280] [drm] Memory usable by graphics device = 2048M
[ 5.856479] [drm] Replacing VGA console driver
[ 5.858146] checking generic (80000000 410000) vs hw (80000000 10000000)
[ 5.858151] fb: switching to inteldrmfb from EFI VGA
[ 5.859860] Console: switching to colour dummy device 80x25
[ 5.862277] i915 0000:00:02.0: irq 109 for MSI/MSI-X
[ 5.862293] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.862301] [drm] Driver supports precise vblank timestamp query.
[ 5.910490] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 5.919372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.949717] [drm] VBT doesn't support DRRS
[ 6.114278] fbcon: inteldrmfb (fb0) is primary device
[ 6.273248] random: nonblocking pool is initialized
[ 6.708926] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
[ 6.750858] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 6.768581] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 7.291351] Console: switching to colour frame buffer device 170x48
[ 7.307944] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.308078] i915 0000:00:02.0: registered panic notifier
[ 7.316105] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.316515] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 7.316821] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.574739] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 7.727744] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 8.249571] BTRFS: device fsid e0990b04-6ad0-40b8-b030-329873b8ff31 devid 1 transid 978 /dev/mapper/RICKY-root
[ 8.250539] BTRFS: device fsid 104f1a0c-aabe-4961-8fce-8986867e151b devid 1 transid 694 /dev/mapper/RICKY-home
[ 8.281801] BTRFS info (device dm-2): disk space caching is enabled
[ 8.381678] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 9.188346] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 9.256958] systemd[1]: Inserted module 'autofs4'
[ 9.276686] NET: Registered protocol family 10
[ 9.277485] systemd[1]: Inserted module 'ipv6'
[ 9.459533] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 9.460742] systemd[1]: Detected architecture x86-64.
[ 9.468844] systemd[1]: Set hostname to <villa>.
[ 9.791357] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 9.844754] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 10.702299] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 11.371802] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.371910] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.372477] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.372623] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.372840] systemd[1]: Created slice Root Slice.
[ 11.372859] systemd[1]: Starting Root Slice.
[ 11.373044] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.373064] systemd[1]: Starting Journal Socket (/dev/log).
[ 11.373279] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 11.373298] systemd[1]: Starting LVM2 metadata daemon socket.
[ 11.373518] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.373537] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.373764] systemd[1]: Reached target Remote File Systems (Pre).
[ 11.373782] systemd[1]: Starting Remote File Systems (Pre).
[ 11.373988] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 11.374008] systemd[1]: Starting fsck to fsckd communication Socket.
[ 11.381309] systemd[1]: Created slice User and Session Slice.
[ 11.381327] systemd[1]: Starting User and Session Slice.
[ 11.386105] systemd[1]: Listening on udev Kernel Socket.
[ 11.386123] systemd[1]: Starting udev Kernel Socket.
[ 11.392830] systemd[1]: Created slice System Slice.
[ 11.392860] systemd[1]: Starting System Slice.
[ 11.397145] systemd[1]: Reached target Slices.
[ 11.397161] systemd[1]: Starting Slices.
[ 11.403318] systemd[1]: Created slice system-getty.slice.
[ 11.403335] systemd[1]: Starting system-getty.slice.
[ 11.409341] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 11.409357] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 11.410377] systemd[1]: Starting Increase datagram queue length...
[ 11.418689] systemd[1]: Reached target Encrypted Volumes.
[ 11.418717] systemd[1]: Starting Encrypted Volumes.
[ 11.422234] systemd[1]: Listening on udev Control Socket.
[ 11.422249] systemd[1]: Starting udev Control Socket.
[ 11.427480] systemd[1]: Listening on Journal Audit Socket.
[ 11.427509] systemd[1]: Starting Journal Audit Socket.
[ 11.430940] systemd[1]: Listening on Journal Socket.
[ 11.430976] systemd[1]: Starting Journal Socket.
[ 11.435946] systemd[1]: Started Read required files in advance.
[ 11.436443] systemd[1]: Starting Read required files in advance...
[ 11.441661] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.509037] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 11.582266] systemd[1]: Started Set Up Additional Binary Formats.
[ 11.589188] systemd[1]: Starting Setup Virtual Console...
[ 11.599493] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 11.731135] systemd[1]: Starting Load Kernel Modules...
[ 11.739524] systemd[1]: Starting Nameserver information manager...
[ 11.746505] systemd[1]: Mounting Debug File System...
[ 11.751984] systemd[1]: Starting Uncomplicated firewall...
[ 11.755949] systemd[1]: Mounted Huge Pages File System.
[ 11.757577] systemd[1]: Starting udev Coldplug all Devices...
[ 11.768617] systemd[1]: Started Braille Device Support.
[ 11.771529] systemd[1]: Starting Braille Device Support...
[ 11.937397] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 11.945192] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 11.948810] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 11.962687] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.972701] lp: driver loaded but no devices found
[ 11.972889] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.995255] systemd[1]: Mounted Debug File System.
[ 12.003577] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.009597] ppdev: user-space parallel port driver
[ 12.028182] systemd[1]: Started Increase datagram queue length.
[ 12.036820] systemd[1]: Started Setup Virtual Console.
[ 12.049694] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 12.062032] systemd[1]: Started Uncomplicated firewall.
[ 12.118663] fuse init (API version 7.23)
[ 12.124960] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 12.132445] systemd[1]: Listening on Syslog Socket.
[ 12.135082] systemd[1]: Starting Syslog Socket.
[ 12.136988] systemd[1]: Starting Journal Service...
[ 12.144516] systemd[1]: Started Load Kernel Modules.
[ 12.148776] systemd[1]: Started udev Coldplug all Devices.
[ 12.158946] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 12.165329] systemd[1]: Mounting FUSE Control File System...
[ 12.169762] systemd[1]: Mounting Configuration File System...
[ 12.172777] systemd[1]: Starting Apply Kernel Variables...
[ 12.221074] systemd[1]: Mounted FUSE Control File System.
[ 12.224927] systemd[1]: Mounted Configuration File System.
[ 12.317758] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 13.129740] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 13.423871] systemd[1]: Started Nameserver information manager.
[ 13.741611] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 13.800937] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 14.664015] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 15.478688] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 16.266714] systemd[1]: Started Apply Kernel Variables.
[ 16.292874] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 17.101644] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 17.708878] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 17.773525] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 18.640247] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 19.215188] systemd[1]: Started Journal Service.
[ 19.454643] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 20.266579] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 21.080854] ehci-pci 0000:00:1d.0: port 1 reset error -110
[ 21.689113] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 21.699525] usb usb1-port1: unable to enumerate USB device
[ 21.879251] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[ 22.043680] usb 2-4: New USB device found, idVendor=1a40, idProduct=0101
[ 22.043707] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 22.043725] usb 2-4: Product: USB 2.0 Hub
[ 22.044838] hub 2-4:1.0: USB hub found
[ 22.044929] hub 2-4:1.0: 4 ports detected
[ 22.045729] usb: failed to peer 2-4-port1 and usb3-port1 by location (2-4-port1:none) (usb3-port1:usb2-port1)
[ 22.045753] usb 2-4-port1: failed to peer to usb3-port1 (-16)
[ 22.045763] usb: port power management may be unreliable
[ 22.046296] usb: failed to peer 2-4-port2 and usb3-port1 by location (2-4-port2:none) (usb3-port1:usb2-port1)
[ 22.046317] usb 2-4-port2: failed to peer to usb3-port1 (-16)
[ 22.046838] usb: failed to peer 2-4-port3 and usb3-port1 by location (2-4-port3:none) (usb3-port1:usb2-port1)
[ 22.046858] usb 2-4-port3: failed to peer to usb3-port1 (-16)
[ 22.047401] usb: failed to peer 2-4-port4 and usb3-port1 by location (2-4-port4:none) (usb3-port1:usb2-port1)
[ 22.047422] usb 2-4-port4: failed to peer to usb3-port1 (-16)
[ 22.324628] usb 2-4.3: new high-speed USB device number 3 using xhci_hcd
[ 22.468869] usb 2-4.3: New USB device found, idVendor=0bda, idProduct=579c
[ 22.468896] usb 2-4.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 22.468914] usb 2-4.3: Product: Lenovo EasyCamera
[ 22.468929] usb 2-4.3: Manufacturer: CKZF36CBH
[ 22.468943] usb 2-4.3: SerialNumber: 200901010001
[ 22.546818] usb 2-4.4: new full-speed USB device number 4 using xhci_hcd
[ 22.631190] usb 2-4.4: No LPM exit latency info found, disabling LPM.
[ 22.632784] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=b728
[ 22.632809] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 22.632827] usb 2-4.4: Product: Bluetooth Radio
[ 22.632842] usb 2-4.4: Manufacturer: Realtek
[ 22.632856] usb 2-4.4: SerialNumber: 00e04c000001
[ 23.639148] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.782032] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 23.782135] ACPI: AC Adapter [ACAD] (on-line)
[ 23.833799] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 23.833811] ACPI: Battery Slot [BAT1] (battery present)
[ 24.079767] hidraw: raw HID events driver (C) Jiri Kosina
[ 24.314351] snd_hda_intel 0000:00:1b.0: irq 110 for MSI/MSI-X
[ 24.375913] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7
[ 24.715140] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.715148] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.715153] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 24.715156] sound hdaudioC0D0: mono: mono_out=0x0
[ 24.715160] sound hdaudioC0D0: inputs:
[ 24.715164] sound hdaudioC0D0: Mic=0x19
[ 24.715168] sound hdaudioC0D0: Internal Mic=0x12
[ 24.725128] Bluetooth: Core ver 2.19
[ 24.725160] NET: Registered protocol family 31
[ 24.725164] Bluetooth: HCI device and connection manager initialized
[ 24.725175] Bluetooth: HCI socket layer initialized
[ 24.725180] Bluetooth: L2CAP socket layer initialized
[ 24.725192] Bluetooth: SCO socket layer initialized
[ 25.362503] Linux video capture interface: v2.00
[ 25.385819] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 25.386334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 25.386813] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 25.628891] usbcore: registered new interface driver btusb
[ 25.684765] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579c)
[ 25.689624] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3:1.0/input/input11
[ 25.689861] usbcore: registered new interface driver uvcvideo
[ 25.689867] USB Video Class driver (1.1.1)
[ 25.708298] Adding 4194300k swap on /dev/mapper/RICKY-swap1. Priority:-1 extents:1 across:4194300k
[ 25.777934] Adding 4194300k swap on /dev/mapper/RICKY-swap2. Priority:-2 extents:1 across:4194300k
[ 27.909822] BTRFS info (device dm-2): disk space caching is enabled
[ 27.984956] systemd-journald[350]: Received request to flush runtime journal from PID 1
[ 28.035994] BTRFS info (device dm-3): disk space caching is enabled
[ 29.066295] cgroup: new mount options do not match the existing superblock, will be ignored
[ 29.680435] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.680441] Bluetooth: BNEP filters: protocol multicast
[ 29.680495] Bluetooth: BNEP socket layer initialized
[ 29.781903] Bluetooth: RFCOMM TTY layer initialized
[ 29.781914] Bluetooth: RFCOMM socket layer initialized
[ 29.781922] Bluetooth: RFCOMM ver 1.11
[ 30.598560] cfg80211: Calling CRDA to update world regulatory domain
[ 30.604799] cfg80211: World regulatory domain updated:
[ 30.604808] cfg80211: DFS Master region: unset
[ 30.604811] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 30.604815] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.604819] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.604823] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.604827] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 30.604831] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 30.604835] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 30.604838] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.604842] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 30.946835] r8169 0000:03:00.0 eth0: link down
[ 30.946867] r8169 0000:03:00.0 eth0: link down
[ 30.946910] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.646702] r8169 0000:03:00.0 eth0: link up
[ 32.646724] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
