On Tue, Nov 17, 2015 at 05:22:26PM +0530, Saurabh Sengar wrote:
> call to of_find_property() before of_property_read_u32() is unnecessary.
> of_property_read_u32() anyway calls to of_find_property() only.
>
> Signed-off-by: Saurabh Sengar <saurabh.truth@xxxxxxxxx>
> ---
> v2 : removed pval variable
> v3 : removed unnecessary if condition
> drivers/usb/chipidea/core.c | 59 +++++++++++++++++++--------------------------
> 1 file changed, 25 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 965d0e2..960a925 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -688,52 +688,43 @@ static int ci_get_platdata(struct device *dev,
> if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
> platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
>
> - if (of_find_property(dev->of_node, "phy-clkgate-delay-us", NULL))
> - of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
> + of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
> &platdata->phy_clkgate_delay_us);
>
> platdata->itc_setting = 1;
> - if (of_find_property(dev->of_node, "itc-setting", NULL)) {
> - ret = of_property_read_u32(dev->of_node, "itc-setting",
> - &platdata->itc_setting);
> - if (ret) {
> - dev_err(dev,
> - "failed to get itc-setting\n");
> - return ret;
> - }
> +
> + ret = of_property_read_u32(dev->of_node, "itc-setting",
> + &platdata->itc_setting);
> + if (ret && ret != -EINVAL) {
> + dev_err(dev, "failed to get itc-setting\n");
> + return ret;
> }
For this one, you may not need to check return value, since
platdata->itc_setting is optional, and doesn't need to set
any flags if platdata->itc_setting is valid.
Other changes are ok for me.
Peter
>
> - if (of_find_property(dev->of_node, "ahb-burst-config", NULL)) {
> - ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
> - &platdata->ahb_burst_config);
> - if (ret) {
> - dev_err(dev,
> - "failed to get ahb-burst-config\n");
> - return ret;
> - }
> + ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
> + &platdata->ahb_burst_config);
> + if (!ret) {
> platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
> + } else if (ret != -EINVAL) {
> + dev_err(dev, "failed to get ahb-burst-config\n");
> + return ret;
> }
>
> - if (of_find_property(dev->of_node, "tx-burst-size-dword", NULL)) {
> - ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
> - &platdata->tx_burst_size);
> - if (ret) {
> - dev_err(dev,
> - "failed to get tx-burst-size-dword\n");
> - return ret;
> - }
> + ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
> + &platdata->tx_burst_size);
> + if (!ret) {
> platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
> + } else if (ret != -EINVAL) {
> + dev_err(dev, "failed to get tx-burst-size-dword\n");
> + return ret;
> }
>
> - if (of_find_property(dev->of_node, "rx-burst-size-dword", NULL)) {
> - ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
> - &platdata->rx_burst_size);
> - if (ret) {
> - dev_err(dev,
> - "failed to get rx-burst-size-dword\n");
> - return ret;
> - }
> + ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
> + &platdata->rx_burst_size);
> + if (!ret) {
> platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
> + } else if (ret != -EINVAL) {
> + dev_err(dev, "failed to get rx-burst-size-dword\n");
> + return ret;
> }
>
> ext_id = ERR_PTR(-ENODEV);
> --
> 1.9.1
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
