Bjørn Mork <bjorn@xxxxxxx> [2015-11-05 12:03:36]:
> make this function return bool. And the patch should go to netdev.
Thanks, done.
> With those changes it looks good to me. But I haven't tested it, so I
> trust your testing :)
usb 2-1.2: new high-speed USB device number 3 using ci_hdrc
qcserial 2-1.2:1.0: Qualcomm USB modem converter detected
usb 2-1.2: Qualcomm USB modem converter now attached to ttyUSB0
qcserial 2-1.2:1.1: Qualcomm USB modem converter detected
usb 2-1.2: Qualcomm USB modem converter now attached to ttyUSB1
qcserial 2-1.2:1.2: Qualcomm USB modem converter detected
usb 2-1.2: Qualcomm USB modem converter now attached to ttyUSB2
qcserial 2-1.2:1.3: Qualcomm USB modem converter detected
usb 2-1.2: Qualcomm USB modem converter now attached to ttyUSB3
qmi_wwan 2-1.2:1.4: cdc-wdm0: USB WDM device
qmi_wwan 2-1.2:1.4 wwan0: register 'qmi_wwan' at usb-ci_hdrc.1-1.2, WWAN/QMI device, 56:3a:52:a3:e9:f7
root@OpenWrt:/# ifconfig wwan0
wwan0 Link encap:Ethernet HWaddr 56:3A:52:A3:E9:F7
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@OpenWrt:/# uqmi -d /dev/cdc-wdm0 --get-capabilities
{
"max_tx_channel_rate": 50000000,
"max_rx_channel_rate": 100000000,
"data_service": "non_simultaneous_cs_ps",
"sim": "supported",
"networks": [
"gsm",
"umts",
"lte"
]
}
root@OpenWrt:/# microcom -s115200 /dev/ttyUSB2
AT+QGPS=1
OK
root@OpenWrt:/# microcom -s115200 /dev/ttyUSB1
$GPRMC,,V,,,,,,,,,,N*53
$GPVTG,,T,,M,,N,,K,N*2C
-- ynezz
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
