So far we were using simple (legacy) GPIO functions & some poor logic to
control power. It got many drawbacks: we were ignoring OF flags
(GPIO_ACTIVE_LOW), we were not setting direction to output and we were
assuming gpio_request success all the time.
Fix it by switching to gpiod functions and adding appropriate checks.
Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
drivers/usb/host/bcma-hcd.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index 5398e3d..77f864e 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -36,6 +36,7 @@ MODULE_LICENSE("GPL");
struct bcma_hcd_device {
struct platform_device *ehci_dev;
struct platform_device *ohci_dev;
+ struct gpio_desc *gpio_desc;
};
/* Wait for bitmask in a register to get set or cleared.
@@ -228,19 +229,12 @@ static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
{
- int gpio;
+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
- gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
- if (!gpio_is_valid(gpio))
+ if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
return;
- if (val) {
- gpio_request(gpio, "bcma-hcd-gpio");
- gpio_set_value(gpio, 1);
- } else {
- gpio_set_value(gpio, 0);
- gpio_free(gpio);
- }
+ gpiod_set_value(usb_dev->gpio_desc, val);
}
static const struct usb_ehci_pdata ehci_pdata = {
@@ -314,7 +308,11 @@ static int bcma_hcd_probe(struct bcma_device *dev)
if (!usb_dev)
return -ENOMEM;
- bcma_hci_platform_power_gpio(dev, true);
+ if (dev->dev.of_node)
+ usb_dev->gpio_desc = devm_get_gpiod_from_child(&dev->dev, "vcc",
+ &dev->dev.of_node->fwnode);
+ if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
+ gpiod_direction_output(usb_dev->gpio_desc, 1);
switch (dev->id.id) {
case BCMA_CORE_NS_USB20:
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
